Placing the seat back and foam cover first, attach the seat back to the frame and use bolts to fix it in its place. Attach the straps marked 1 and 2, put in the seat belt anchor, tighten the bolt to the recommended work of 43 Nm (32 ft. lbs.). After that, fasten the side shields, seat belt bezel and cup holder. To make the outer seat cover, put the seat back cover over the frame and put on the headrest sleeves. After placing the seat back cushion on the frame, put the seat back cover on it and add the seat back onto the frame with the bolts. Attach the J-straps labeled 1 and 2 and place the side shields.