How to Replace and Install Sway Bar Bushings on Dodge Grand Caravan?

When replacement of the sway bar to front suspension cradle bushings is needed, install the new bushings prior to installing the sway bar on the car. To remove, cut open the tab on the bushings and take them off the bar. To assemble, open the bushing at its slit and slip it over the sway bar by hand. When installing the bushings, set the corner that forms a square on the floor and have the bike's slit at the end facing the back of the vehicle.

How to Service and Repair a Sway Bar Bushing on Dodge Grand Caravan?

For sway bar bushing service or repair, jack up the car and loosen the 2 bolts that fix the emission leak detection pump to the cradle crossmember reinforcement. Turn the leak detection pump aside to get to the sway bar cushion retainers. Pull each nut and bolt holding the sway bar cushion retainers in place on the cradle crossmember and after that, remove the retainer. Step back the cushion from the sway bar by slicing open the slit. Spread each new cushion and push it on to the sway bar, lining up the square point of the bushing with the ground and the slit facing where the seatback moves. Place the sway bar into position, make sure the cushions are aligned, hook each retainer into the cradle crossmember hole overhead and insert and tighten the two mounting bolts from the back of the cradle crossmember to 68 Nm (50 ft. lbs. torque). Once finished with the bolt, attach the emission leak detection pump back to the cradle crossmember reinforcement with both bolts and bring down the vehicle.

OEM Dodge Grand Caravan Sway Bar Bushing

Stabilizer Sway Bar Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Sway Bar Bushings found

View related parts
Dodge Grand Caravan Stabilizer Bar Bushing, Front Part Number: 68140000AA
$18.56 MSRP: $26.80
You Save: $8.24 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Suspension Stabilizer Bar Bushing, Front; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar
- Position: Front
- Replaces: 4721918AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2020 Dodge Grand Caravan | American Value Package, Crew, GT, R/T, SE, SE 30th Anniversary Edition, SE Plus, SXT, SXT 30th Anniversary Edition | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Grand Caravan Stabilizer Bar Bushing, Front Part Number: 4721085AJ
$18.22 MSRP: $27.05
You Save: $8.83 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Front Suspension Stabilizer Bar Bushing Kit; Sway Bar Bushing.; Bushings; Bushing Stabilizer Bar
- Position: Front
- Replaces: 4721085AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2011 Dodge Grand Caravan | C/V, Crew, Express, Mainstreet, R/T | 3.3L V6, 3.6L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Grand Caravan Stabilizer Bar Bushing, Front Part Number: 4721918AF
$18.22 MSRP: $27.05
You Save: $8.83 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Suspension Stabilizer Bar Bushing, Front; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar
- Position: Front
- Replaces: 5151236AB, 4721085AC, 4721918AA, 4721072AC, 4721085AD, 5151236AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2011 Dodge Grand Caravan | C/V, Crew, Express, Mainstreet, R/T, SE, SXT | 3.3L V6, 3.6L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Grand Caravan Stabilizer Bar Cushion, Front Part Number: 4743041AE
$13.34 MSRP: $19.80
You Save: $6.46 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Suspension Stabilizer Bar Bushing, Front; Sway Bar Bushing; Bushings
- Position: Front
- Replaces: 4743041AD, 4743041AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2007 Dodge Grand Caravan | Anniversary Edition, Base, C/V, EL, ES, EX, SE, SE Plus, SXT, Sport | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Stabilizer Bar Cushion, Front Part Number: 4743024AE
$11.66 MSRP: $17.05
You Save: $5.39 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Front Suspension Stabilizer Bar Bushing Kit; Sway Bar Bushing Kit.; Bushings
- Position: Front
- Replaces: 4743024AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2007 Dodge Grand Caravan | Anniversary Edition, Base, C/V, EL, ES, EX, SE, SE Plus, SXT, Sport | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Mirror Assembly, Driver Side Part Number: 4684890
$15.46 MSRP: $33.45
You Save: $17.99 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Sway Bar; Suspension Stabilizer Bar Kit; Stabilizer Bushing Kit.; Stabilizer Bar Cushion; Bushings; Cushion, Sway Bar Front Suspension; Cushion Sway Eliminator
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Dodge Grand Caravan | Base, ES, LE, SE, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L CNG, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Stabilizer Bar Bushing Part Number: 4228785
Product Specifications
- Other Name: Bushing - Sway Bar; Sway Bar Bushing; Bushings; Bushing, Sway Eliminator Shaft; Bushing Stabilizer Bar; Bushing, Rear Sway Bar
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-2000 Dodge Grand Caravan | Base, ES, LE, SE, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L CNG, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Stabilizer Bar Bushing, Front Part Number: 68139999AA
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Suspension Stabilizer Bar Bushing, Front; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar
- Position: Front
- Replaces: 4721085AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012 Dodge Grand Caravan | Crew, R/T, SE, SXT | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Grand Caravan Stabilizer Bar Bushing, Rear Part Number: 5006124AB
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Suspension Stabilizer Bar Bushing, Rear; Sway Bar Bushing; Bushing Stabilizer Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Dodge Grand Caravan | Base, C/V, SE, SE Plus, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Stabilizer Bar Bushing, Rear Part Number: 4626015
Product Specifications
- Other Name: Bushing - Sway Bar; Suspension Stabilizer Bar Bushing, Rear; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar; Bushing, Rear Sway Bar; Shaft, Sway Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004, 1991-1992 Dodge Grand Caravan | Anniversary Edition, Base, C/V, EL, ES, EX, LE, SE, SXT, Sport | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Stabilizer Bar Bushing Part Number: 4449618
Product Specifications
- Other Name: Bushing - Front Suspension Sway Eliminator To Control; Stabilizer Bar Cushion; Bushings for Sway Bar with Standard Suspension.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-1995 Dodge Grand Caravan | Base, ES, LE, SE | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

Dodge Grand Caravan Sway Bar Bushing

Choose OEM Sway Bar Bushing that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Sway Bar Bushing follows strict manufacturing steps to lock in quality and fit. If your Dodge Grand Caravan matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Grand Caravan parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Sway Bar Bushing is a comprised which significantly consists of the fundamental aspect of the Dodge Grand Caravan as a reliable car model. Having the resemblance of a shock absorber for road bumps and using as less noise as possible, the Sway Bar Bushing helps to support the sway bars, which are extremely important in providing stableness for turning operations on any car. This feature is special for some models of Grand Caravan because most of them can be equipped two kinds of the Sway Bar, the front one and the rear one that will demand repective Sway Bar Bushings. These bushings are supposed to be that long lasting; regular servicing and greasing will considerably reduce handling problems and guarantee road safety. Possible signs that the Dodge Grand Caravan Sway Bar Bushing needs to be changed are slows response and strange sounds when the Caravan is being worn. The Chrysler Group through its brand Dodge Grand Caravan is known for more space inside and the flexibility that is experienced once inside the car making it be preferable especially by families. In addition, its safety ratings are worthy of applause and they serve to support the need to incorporate the Sway Bar Bushing in increasing the functionality of vehicles. In particular, the Dodge Grand Caravan Sway Bar Bushing attracts consumers' attention because of its enhanced durability and the ability to fit most of the Grand Caravan series models which provide the Driver with the Smooth and stable ride. Hence, the Dodge Grand Caravan especially with a feature of Sway Bar Bushings aim at passenger comfort and cargo space, remains to be a consumer's choice of a reliable minivan with enhanced performance and safety.

Dodge Grand Caravan Sway Bar Bushing Parts and Q&A

Mirror Assembly, Driver Side
4684890
Q: How to Replace and Install Sway Bar Bushings on Dodge Grand Caravan?
A:
When replacement of the sway bar to front suspension cradle bushings is needed, install the new bushings prior to installing the sway bar on the car. To remove, cut open the tab on the bushings and take them off the bar. To assemble, open the bushing at its slit and slip it over the sway bar by hand. When installing the bushings, set the corner that forms a square on the floor and have the bike's slit at the end facing the back of the vehicle.
Stabilizer Bar Cushion, Front
4743041AE
Q: How to Service and Repair a Sway Bar Bushing on Dodge Grand Caravan?
A:
For sway bar bushing service or repair, jack up the car and loosen the 2 bolts that fix the emission leak detection pump to the cradle crossmember reinforcement. Turn the leak detection pump aside to get to the sway bar cushion retainers. Pull each nut and bolt holding the sway bar cushion retainers in place on the cradle crossmember and after that, remove the retainer. Step back the cushion from the sway bar by slicing open the slit. Spread each new cushion and push it on to the sway bar, lining up the square point of the bushing with the ground and the slit facing where the seatback moves. Place the sway bar into position, make sure the cushions are aligned, hook each retainer into the cradle crossmember hole overhead and insert and tighten the two mounting bolts from the back of the cradle crossmember to 68 Nm (50 ft. lbs. torque). Once finished with the bolt, attach the emission leak detection pump back to the cradle crossmember reinforcement with both bolts and bring down the vehicle.