How to Install a Windshield Washer Fluid Reservoir on Dodge Grand Caravan?

Put the filler neck and hose into the front fender side shield opening and then join the reservoir to the body mount, letting it drop. Secure the two reservoir mounting screws, then tighten them to 8.5 - 11.3 Nm (75 - 100 in. lbs.). Our power harness has connectors; attach them to the washer pump motor and the fluid level sensor, closing or locking the red lock on the harness. Wire the washer so it will not be pinched to avoid any inoperable washers. Put on the left and right front wheelhouse splash shields and next install the right front wheel and tire assembly. When the car is on the ground again, mount the tube and tighten it to 8.5 - 11.3 Nm (75 - 100 in. lbs.). This time you should attach the washer hose in the hose clip on the front side fender shield and reattach the battery negative cable to the battery. Ensure the system is working correctly.

How to Remove the Windshield Washer Fluid Reservoir on Dodge Grand Caravan?

The first step in removing the reservoir is to pull off the battery negative cable and isolate it. After that, separate the washer hose from the clip on the fender side shield. After hoisting up the vehicle, remove the wheel from the right front position using a wheel and tire assembly as a unit. Take out the left right front wheelhouse splash shield and shift it out of the way. Unplug the washer hose from the front (outboard) washer pump port and place a jumper hose there to allow the fluid to drain into a clean container. Slide the red lock on the body connectors to unlock, depress the black tab and pull the connector off the pump or sensor. Take out the two screws holding the reservoir, then rise the reservoir a little bit and lower it down to get the filler neck and washer hose to pass through the front shield hole.

OEM Dodge Grand Caravan Windshield Washer Fluid Reservoir

Windshield Washer Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Windshield Washer Fluid Reservoirs found

View related parts
Dodge Grand Caravan Washer Reservoir Part Number: 68028584AA
$78.06 MSRP: $110.00
You Save: $31.94 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir - Windshield Washer; Windshield Washer Reservoir; Reservoir Windshield Washer
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Grand Caravan | C/V, SE, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Grand Caravan Washer Reservoir Part Number: 68028581AA
$84.68 MSRP: $176.00
You Save: $91.32 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir - Windshield Washer; Washer Fluid Reservoir; Windshield Washer Reservoir; Reservoir Windshield Washer
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Grand Caravan | C/V, SE, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Grand Caravan Washer Reservoir Part Number: 68125514AA
$113.42 MSRP: $171.00
You Save: $57.58 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir - Windshield Washer; Washer Fluid Reservoir; Windshield Washer Reservoir; Reservoir; Reservoir Windshield Washer
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2020 Dodge Grand Caravan | American Value Package, C/V, Crew, Express, GT, Mainstreet, R/T, SE, SE 30th Anniversary Edition, SE Plus, SXT, SXT 30th Anniversary Edition | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Grand Caravan Washer Reservoir Part Number: 5127200AA
$155.59 MSRP: $197.24
You Save: $41.65 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir - Washer; Washer Fluid Reservoir; Windshield Washer Reservoir; Reservoir Washer
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2007 Dodge Grand Caravan | Anniversary Edition, Base, C/V, EX, SE, SE Plus, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Washer Reservoir Part Number: 5019243AA
$142.28
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir - Washer; Washer Fluid Reservoir; Windshield Washer Reservoir; Reservoir Washer
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Dodge Grand Caravan | Base, EL, ES, EX, SE, Sport | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Reservoir Part Number: 4797693AB
Product Specifications
- Other Name: Reservoir - Washer; Windshield Washer Reservoir; Reservoir Washer
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Dodge Grand Caravan | Base, ES, LE, SE, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L CNG, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Washer Reservoir Part Number: 4467343
Product Specifications
- Other Name: Reservoir Package W/Washer; Windshield Washer Reservoir; Reservoir; Reservoir, Washer
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987-1990 Dodge Grand Caravan | LE, SE | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS

Dodge Grand Caravan Windshield Washer Fluid Reservoir

Choose OEM Windshield Washer Fluid Reservoir that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Windshield Washer Fluid Reservoir follows strict manufacturing steps to lock in quality and fit. If your Dodge Grand Caravan matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Grand Caravan parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Grand Caravan Windshield Washer Fluid Reservoir Parts and Q&A

Washer Reservoir
68028581AA
Q:
How to Install a Windshield Washer Fluid Reservoir on Dodge Grand Caravan?
A:
Put the filler neck and hose into the front fender side shield opening and then join the reservoir to the body mount, letting it drop. Secure the two reservoir mounting screws, then tighten them to 8.5 - 11.3 Nm (75 - 100 in. lbs.). Our power harness has connectors; attach them to the washer pump motor and the fluid level sensor, closing or locking the red lock on the harness. Wire the washer so it will not be pinched to avoid any inoperable washers. Put on the left and right front Wheelhouse splash shields and next install the right front wheel and tire assembly. When the car is on the ground again, mount the tube and tighten it to 8.5 - 11.3 Nm (75 - 100 in. lbs.). This time you should attach the washer hose in the hose clip on the front side fender shield and reattach the battery negative cable to the battery. Ensure the system is working correctly.
Washer Reservoir
68028584AA
Q:
How to Remove the Windshield Washer Fluid Reservoir on Dodge Grand Caravan?
A:
The first step in removing the reservoir is to pull off the battery negative cable and isolate it. After that, separate the washer hose from the clip on the fender side shield. After hoisting up the vehicle, remove the wheel from the right front position using a wheel and tire assembly as a unit. Take out the left right front wheelhouse splash shield and shift it out of the way. Unplug the washer hose from the front (outboard) washer pump port and place a jumper hose there to allow the fluid to drain into a clean container. Slide the red lock on the body connectors to unlock, depress the black tab and pull the connector off the pump or sensor. Take out the two screws holding the reservoir, then rise the reservoir a little bit and lower it down to get the filler neck and washer hose to pass through the front shield hole.