How to Service a Coolant Temperature Sensor on Dodge Intrepid?

Before servicing the Engine Coolant Temperature (ECT) Sensor, first disconnect the negative cable from the remote jumper terminal. Wait until the engine feels cold before taking off the coolant sensor electrical connector and then pulling out the sensor. During installation, set the engine coolant temperature sensor in place and fasten it to a torque of 28 Nm (20 ft. lbs.). Then, connecting the electrical connector to the sensor and making sure the negative wire from the battery is back on the remote jumper terminal.

How to Replace a Coolant Temperature Sensor on Dodge Intrepid?

Begin your procedure by taking away the negative battery cable near the engine coolant temperature sensor which sits near the thermostat housing. With cold engine, go ahead and take out the coolant sensor. The sensor must be fitted tightly but carefully to the breast again, with torque set to no more than 28 Nm (20 ft. lbs.). After this, join the electrical connector to the sensor and restore the negative battery cable.

OEM Dodge Intrepid Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Coolant Temperature Sensors found

View related parts
Dodge Intrepid Coolant Temperature Sensor Part Number: 56027873
$90.13 MSRP: $125.00
You Save: $34.87 (28%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Coolant Temperature; Engine Coolant Temperature Sensor; Cooling Fan Temperature Switch; Temperature Sensor; Fan Switch; Temperature Coolant Sensor; Temperature Sending Unit; Sensor Coolant Temperature
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2001 Dodge Intrepid | Base, ES, R/T, SE | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
Dodge Intrepid Coolant Temperature Sensor Part Number: 33004281
$42.24 MSRP: $62.00
You Save: $19.76 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Coolant Temperature; Engine Coolant Temperature Sensor; Cooling Fan Temperature Switch; Fan Switch; Coolant Temperature Sensor; Engine Coolant Temperature; 1994-95.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1997 Dodge Intrepid | Base, ES | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Dodge Intrepid Coolant Temperature Sensor Part Number: 5269870AB
$63.79 MSRP: $86.70
You Save: $22.91 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Coolant Temperature; Engine Coolant Temperature Sensor; Sender Unit, Coolant Temperature; Temperature Sensor; Temperature Coolant Sensor; Temperature Sending Unit; Sensor Coolant Temperature
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2004 Dodge Intrepid | ES, Police, R/T, SE, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

Dodge Intrepid Coolant Temperature Sensor

Choose OEM Coolant Temperature Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Coolant Temperature Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Intrepid matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Intrepid parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Intrepid Coolant Temperature Sensor Parts and Q&A

Coolant Temperature Sensor
5269870AB
Q: How to Service a Coolant Temperature Sensor on Dodge Intrepid?
A:
Before servicing the Engine Coolant Temperature (ECT) Sensor, first disconnect the negative cable from the remote jumper terminal. Wait until the engine feels cold before taking off the coolant sensor electrical connector and then pulling out the sensor. During installation, set the engine coolant temperature sensor in place and fasten it to a torque of 28 Nm (20 ft. lbs.). Then, connecting the electrical connector to the sensor and making sure the negative wire from the battery is back on the remote jumper terminal.
Coolant Temperature Sensor
56027873
Q: How to Replace a Coolant Temperature Sensor on Dodge Intrepid?
A:
Begin your procedure by taking away the negative Battery Cable near the engine coolant temperature sensor which sits near the Thermostat Housing. With cold engine, go ahead and take out the coolant sensor. The sensor must be fitted tightly but carefully to the breast again, with torque set to no more than 28 Nm (20 ft. lbs.). After this, join the electrical connector to the sensor and restore the negative battery cable.