How to Service the Air Bag Control Module on Dodge Journey?

Before you touch the ORC, remove the negative terminal from the battery and then wait for two minutes to make sure the air bags are inactive. Lift the mini console out of the top of the floor panel transmission tunnel. Release and lift the lever arms on the rearward facing wire harness connectors, one at a time. Open the three fasteners that keep the ORC in place on the bracket welded to the top of the floor transmission tunnel. Once you have worked the router into place, lift it slightly to free the pins and unlock it from the bracket.

How to Install an Air Bag Control Module Safely on Dodge Journey?

Make certain the Srs is disabled before beginning installation to stop the air bags from accidentally activating; isolate the negative battery cable and allow two minutes for the system to rest. Position the Orc so the arrow on the label is forward and the locating pins enter the bracket on the top of the tunnel transmission panel. Install and tightly screw the three Orc screws to 12.5 Nm (9 ft. lbs.). Make sure the lever arms are not latched before you begin to join the wire harness connectors to steer clear of damage. Once done with the body wire harness, hook the instrument panel wire harness and push the latches to ensure both are properly connected. Mount the mini console onto the transmission tunnel that runs down the middle of the floor panel. Do not attach the negative battery cable, as a test is required on the Srs system after it has been serviced. Any Orc module shipped as part of the service replacement process is locked out and will give an Orc Unlocked - All Deployment Disabled fault when installed. Use the diagnosis equipment to unlock the module and run the Module Initialization procedure to clear the fault and start it up correctly.

OEM Dodge Journey Air Bag Control Module

SRS Airbag Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Air Bag Control Modules found

View related parts
Dodge Journey Diagnostic Module Part Number: 68163806AB
$398.46 MSRP: $585.00
You Save: $186.54 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Air Bag Control; Module Air Bag Control
- Replaces: 56054655AE, 56054655AD, 68163806AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2017 Dodge Journey | AVP, Crew, Crossroad, GT, Limited, R/T, SE, SXT | 2.4L L4, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Diagnostic Module Part Number: 56054711AE
$168.82 MSRP: $254.00
You Save: $85.18 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Occupant Restraint
- Replaces: 56054711AD, 56054711AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010-2011 Dodge Journey | Base, Crew, Express, Lux, Mainstreet, R/T, SE, SXT | 2.4L L4, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Diagnostic Module Part Number: 56054555AE
$245.86 MSRP: $366.00
You Save: $120.14 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Occupant Restraint; Air Bag Control Module; Diagnostic Unit
- Replaces: 56054555AD, 56054555AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010-2011 Dodge Journey | Base, Crew, Express, Lux, Mainstreet, R/T, SE, SXT | 2.4L L4, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Diagnostic Module Part Number: 68163807AB
$415.64 MSRP: $611.00
You Save: $195.36 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Air Bag Control; Module Air Bag Control
- Replaces: 56054811AE, 56054811AD, 68163807AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2017 Dodge Journey | AVP, Crew, Crossroad, GT, Limited, R/T, SE, SXT | 2.4L L4, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Diagnostic Module Part Number: 68477685AB
$256.06 MSRP: $377.00
You Save: $120.94 (33%)
ADD TO CART
Product Specifications
- Other Name: Module - Air Bag Control; Air Bag Control Module; Diagnostic Unit
- Replaces: 68303594AB, 68477685AA, 68303594AC, 68303594AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2020 Dodge Journey | Crossroad, GT, SE, SE Value, SXT | 2.4L L4, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Diagnostic Unit Part Number: 68163811AB
$108.65 MSRP: $160.00
You Save: $51.35 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Air Bag Control; Air Bag Control Module
- Replaces: 68139317AC, 68163811AA, 68139317AB, 68139317AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2013 Dodge Journey | AVP, Crew, R/T, SE, SXT | 2.4L L4, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Diagnostic Unit Part Number: 68163812AB
$131.43 MSRP: $195.00
You Save: $63.57 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Air Bag Control; Air Bag Control Module
- Replaces: 68148914AB, 68148914AA, 68163812AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2017 Dodge Journey | AVP, Crossroad, GT, Limited, R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Diagnostic Module Part Number: 4606949AJ
$333.10 MSRP: $496.00
You Save: $162.90 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Occupant Restraint
- Replaces: 4606949AI, 4606949AG, 4606949AF, 4606949AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Dodge Journey | R/T, SE, SXT | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
Dodge Journey Diagnostic Unit Part Number: 56054777AF
Product Specifications
- Other Name: Module - Occupant Restraint; Air Bag Control Module
- Replaces: 56054777AD, 56054777AB, 56054777AC, 56054777AA, 56054777AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Dodge Journey | R/T, SE, SXT | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS

Dodge Journey Air Bag Control Module

Choose OEM Air Bag Control Module that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Air Bag Control Module follows strict manufacturing steps to lock in quality and fit. If your Dodge Journey matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Journey parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

A supplemental restraint system in the Dodge Journey depends on the Air Bag Control Module to monitor collision sensors and activate airbags during important impacts which ensures occupant safety. The Air Bag Control Module stands out for its dependable operation and dynamic performance thus critically supporting Dodge Journey safety performance and operational efficiency. The module operates smoothly with different Journey models because it proves its capability to safeguard driver safety throughout Dodge's vehicle range. The Air Bag Control Module evolved from mechanical bulk to Electronic Control Unit (ECU) technology which improved functionality through built-in startup tests for operational checking. This feature, along with its ability to retain crash data for post-accident analysis, underscores the importance of the Air Bag Control Module in the Dodge Journey's safety profile. Front airbags and high-end safety features with advanced braking systems are among the attributes that distinguish the Journey SUV while the reliable Air Bag Control Module serves as an integral part of its overall design. In the automotive market the Dodge car maintains its popularity because its Air Bag Control Module protects passengers during impact and functions as one of the essential components that enhances the model's performance.

Dodge Journey Air Bag Control Module Parts and Q&A

Diagnostic Module
4606949AJ
Q: How to Service the Air Bag Control Module on Dodge Journey?
A:
Before you touch the ORC, remove the negative terminal from the battery and then wait for two minutes to make sure the air bags are inactive. Lift the mini console out of the top of the floor panel transmission tunnel. Release and lift the lever arms on the rearward facing wire harness connectors, one at a time. Open the three fasteners that keep the ORC in place on the bracket welded to the top of the floor transmission tunnel. Once you have worked the router into place, lift it slightly to free the pins and unlock it from the bracket.
Diagnostic Unit
56054777AF
Q: How to Install an Air Bag Control Module Safely on Dodge Journey?
A:
Make certain the Srs is disabled before beginning installation to stop the air bags from accidentally activating; isolate the negative Battery Cable and allow two minutes for the system to rest. Position the Orc so the arrow on the label is forward and the locating pins enter the bracket on the top of the tunnel transmission panel. Install and tightly screw the three Orc screws to 12.5 Nm (9 ft. lbs.). Make sure the lever arms are not latched before you begin to join the wire harness connectors to steer clear of damage. Once done with the body wire harness, hook the instrument panel wire harness and push the latches to ensure both are properly connected. Mount the mini console onto the transmission tunnel that runs down the middle of the floor panel. Do not attach the negative battery cable, as a test is required on the Srs system after it has been serviced. Any Orc module shipped as part of the service replacement process is locked out and will give an Orc Unlocked - All Deployment Disabled fault when installed. Use the diagnosis equipment to unlock the module and run the Module Initialization procedure to clear the fault and start it up correctly.