How to Remove the Upper Intake Manifold on Dodge Journey?

Before removing the upper intake manifold, lift off the engine cover and take off the negative battery cable. Then, extract the air cleaner housing and separate the hose from the inlet. Separate the Positive Crankcase Ventilation (PCV) Valve (1), EVAP Purge Solenoid (2), EGR Tube (3) and Power Brake Booster (4) from the upper part of the intake manifold's vacuum hoses. After that, take out the electrical connectors from the MTV (1), Short Runner Valve (2), TPS (3) and MAP (4). Afterwards, unscrew the Manifold Tuning Valve (5) and then unscrew the nuts at the rear intake manifold brackets (1 and 2). Free both bolts (3) and (4) that hold the rear intake manifold brackets and place the brackets off to the side. In the end, take out the 7 upper manifold bolts (numbered 1) and the upper intake manifold (2), but clean the surfaces of the gaskets while you do so.

How Is the Upper Intake Manifold Installed on Dodge Journey?

You should first inspect and clean the surfaces where the gasket meets for the upper intake manifold and then add a clean new gasket. If installation of the throttle body on the upper intake is needed, carry out that step as required. After that, place the upper intake manifold (2) on the head and start threading all relevant bolts (1) by hand. Set each bolt to 12 Nm (105 in. lbs.) by bolting from the center to the outermost parts. Set the brackets for the rear intake manifold in place on the head and bolt down the 2 intake manifold to bracket retainer bolts. Add the EGR tube and attach the four electrical connectors from the MTV, Short Runner Valve, TPS and MAP. Join the vacuum hoses to the top intake manifold with the PCV Valve, EVAP Purge Solenoid, EGR Tube and the Power Brake Booster attached. Attach the housing (4) and inlet hose (1) for the air cleaner and after that, connect the negative battery cable. Now, place and attach the engine cover.

OEM Dodge Journey Intake Manifold

Engine Intake Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Intake Manifolds found

View related parts
Dodge Journey Intake Manifold, Upper Part Number: 5184693AE
$381.29 MSRP: $560.00
You Save: $178.71 (32%)
ADD TO CART
Product Specifications
- Other Name: Manifold - Intake Manifold; Engine Intake Manifold, Upper; Intake Plenum; Plenum; Plenum Intake Manifold
- Position: Upper
- Replaces: 68621090AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2019 Dodge Journey | Crew, Crossroad, GT, Limited, Lux, Mainstreet, R/T, SE, SXT | 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Intake Manifold, Lower Part Number: 5184199AF
$381.29 MSRP: $560.00
You Save: $178.71 (32%)
ADD TO CART
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold, Lower; Intake Plenum; Manifold Intake; Engine Intake Manifold
- Position: Lower
- Replaces: 5184199AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2019 Dodge Journey | Crew, Crossroad, GT, Limited, Lux, Mainstreet, R/T, SE, SXT | 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Intake Manifold Part Number: 4884495AK
$499.22 MSRP: $734.00
You Save: $234.78 (32%)
ADD TO CART
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold; Manifold Intake
- Replaces: 4884495AG, 4884495AF, 4884495AI, 4884495AE, 4884542AC, 4884495AH, 4884495AJ, 4884495AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2012 Dodge Journey | AVP, Base, Express, SE, SXT | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Journey Intake Manifold Part Number: 4593915AB
$488.41 MSRP: $745.00
You Save: $256.59 (35%)
ADD TO CART
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold; Manifold Intake
- Replaces: 4593915AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2020 Dodge Journey | AVP, Base, Crossroad, Express, SE, SE Value, SXT | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Journey Intake Manifold, Lower Part Number: 4892233AA
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold, Lower; Manifold Intake
- Position: Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Dodge Journey | R/T, SXT | 6 Cyl 3.5 L GAS
View related parts
Dodge Journey Intake Manifold, Lower Part Number: 4892233AB
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold, Lower; Manifold Intake
- Position: Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Journey | Crew, R/T, SXT | 6 Cyl 3.5 L GAS
View related parts
Dodge Journey Intake Plenum, Upper Part Number: 4593649AD
Product Specifications
- Other Name: Plenum - Intake Manifold; Engine Intake Manifold, Upper; Plenum; Plenum Intake Manifold Includes Items In The Box; Plenum Intake Manifold
- Position: Upper
- Replaces: 4593649AC, 4593649AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Journey | Crew, R/T, SXT | 3.5L V6, 6 Cyl 3.5 L GAS

Dodge Journey Intake Manifold

Choose OEM Intake Manifold that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Intake Manifold follows strict manufacturing steps to lock in quality and fit. If your Dodge Journey matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Journey parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Intake Manifold is the essential part of the Dodge Journey vehicles, which highly contributes to the efficiency of the car. This Intake Manifold can be located in several places in the car and has the primary role of distributing air or air/fuel mixtures to the cylinder head intake ports and thus directly affecting the power output and efficiency of the car's engine. Made from light materials that include plastic, the Intake Manifold also enhances the overall heat dissipation while at the same time enhances the overall fuel talking and burning. Its design often comprises upper and bottom halves, coolant channels, and assembled sensors with additional features of airflow control and fuel dispersion. The Dodge Journey being a three-row SUV that has attractive features of spacious interiors and yet being affordable greatly comprehends this Intake Manifold, which is centrally important in the constant and safe performance of the vehicle's engine. This means that drivers would be able to tap into better performance and operations from their Jeeps as far as Journey models are concerned. Specifically, the Intake Manifold proposed in the marketplace distinguishes itself by its primary goal to increase horsepower and especially torque, especially if combined in use with other engine upgrades. Being one of the most important components of the Dodge Journey engine, the Intake Manifold plays a key role in those who are searching for the performance enhancements while enjoying all comforts and safety that are offered by Dodge Journey. In summary, the Intake Manifold is a perfect illustration of the firm's drive for quality and excellence in the car manufacturing market.

Dodge Journey Intake Manifold Parts and Q&A

Intake Plenum, Upper
4593649AD
Q: How to Remove the Upper Intake Manifold on Dodge Journey?
A:
Before removing the upper intake manifold, lift off the engine cover and take off the negative Battery Cable. Then, extract the air cleaner housing and separate the hose from the inlet. Separate the Positive Crankcase Ventilation (PCV) Valve (1), EVAP Purge Solenoid (2), EGR Tube (3) and Power Brake Booster (4) from the upper part of the intake manifold's vacuum hoses. After that, take out the electrical connectors from the MTV (1), Short Runner Valve (2), TPS (3) and MAP (4). Afterwards, unscrew the Manifold Tuning Valve (5) and then unscrew the nuts at the rear intake manifold brackets (1 and 2). Free both bolts (3) and (4) that hold the rear intake manifold brackets and place the brackets off to the side. In the end, take out the 7 upper manifold bolts (numbered 1) and the upper intake manifold (2), but clean the surfaces of the gaskets while you do so.
Intake Manifold
4884495AK
Q: How Is the Upper Intake Manifold Installed on Dodge Journey?
A:
You should first inspect and clean the surfaces where the gasket meets for the upper intake manifold and then add a clean new gasket. If installation of the Throttle Body on the upper intake is needed, carry out that step as required. After that, place the upper intake manifold (2) on the head and start threading all relevant bolts (1) by hand. Set each bolt to 12 Nm (105 in. lbs.) by bolting from the center to the outermost parts. Set the brackets for the rear intake manifold in place on the head and bolt down the 2 intake manifold to bracket retainer bolts. Add the EGR Tube and attach the four electrical connectors from the MTV, Short Runner Valve, TPS and MAP. Join the vacuum hoses to the top intake manifold with the PCV Valve, EVAP Purge Solenoid, EGR Tube and the Power Brake Booster attached. Attach the housing (4) and inlet hose (1) for the air cleaner and after that, connect the negative Battery Cable. Now, place and attach the engine cover.