How to Service and Repair a Throttle Body on a 3.5L Engine on Dodge Journey?

For service or repair of the throttle body on a 3.5L engine, start by disconnecting and isolating the negative battery cable. After that, take off the engine cover and the clean air hose from the throttle body. First, separate the connector from the throttle body, next take out the nut that holds the throttle bracket to the engine. Removing the bolt and the throttle body bracket comes after opening the air cleaner case. With the last bolt and stud removed, take out the rest of the throttle body connections to the intake manifold.

How to Install a Throttle Body on a 3.5L Engine on Dodge Journey?

For installing the throttle body, clean, undamaged and debris-free the intake gasket and change it if it is in bad condition. Ensure to avoid excessive turning of torque, as doing so may hurt the throttle body, gaskets, bolts or the intake manifold. Put the throttle body on next to the gasket and stud bolts in the intake manifold, hand-tightening the three bolts and the one stud. Use the proper order for tightening, crossing from center to the edges and tighten to 5.5 Nm (50 in. lbs.). Next, put the throttle body bracket in place and screw in the nut until you reach 12 Nm (106 in. lbs.) tightness and the bolt to 28 Nm (20.5 ft. lbs.). Attach the electrical connector to the throttle body, fix the clean air hose and set up the engine cover. Lastly, secure the ground wire back on the battery, then tighten the nut using your manual to 5 Nm (45 in. lbs.). Finally, bring out the scan tool to initiate the Etc Relearn function.

OEM Dodge Journey Throttle Body

Fuel Injection Throttle Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Throttle Bodies found

View related parts
Dodge Journey Throttle Body Part Number: 4861691AA
$292.31 MSRP: $430.00
You Save: $137.69 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body.
- Replaces: 4861694AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Journey | Crew, R/T, SXT | 6 Cyl 3.5 L GAS
View related parts
Dodge Journey Throttle Body Part Number: 5184349AF
$435.37 MSRP: $662.00
You Save: $226.63 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body Assembly; Electronic Throttle Body Module
- Replaces: 5184349AE, 5184349AC, 5184349AD, 5184349AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2020 Dodge Journey | Crew, Crossroad, GT, Limited, Lux, Mainstreet, R/T, SE, SXT | 3.6L V6, 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Throttle Body Part Number: 68366012AB
$412.20 MSRP: $605.00
You Save: $192.80 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Throttle; Throttle Body Includes Throttle Position Sensor
- Replaces: 68366012AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2019-2020 Dodge Journey | Crossroad, SE, SE Value | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Journey Throttle Body Part Number: 4891735AD
Product Specifications
- Other Name: Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body.; Throttle Body Includes Throttle Position Sensor
- Replaces: 4891735AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2018 Dodge Journey | AVP, Base, Crossroad, Express, SE, SXT | 2.4L L4, 4 Cyl 2.4 L GAS

Dodge Journey Throttle Body

Choose OEM Throttle Body that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Throttle Body follows strict manufacturing steps to lock in quality and fit. If your Dodge Journey matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Journey parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Throttle Body is a critical part for boosting and improving the functionality of any Dodge Journey car model. This is a very vital component that regulates the amount of air that enters the engine using a butterfly valve, depending with the position of the accelerator pedal to allow proper fuel injection and efficiency of the engine. A shift from mechanical linkage to ETC in the later models of Dodge Journey has made throttle control better also, enhanced the safety aspects of the car which is a marvel in the automotive industry. Since the launch of the Dodge Journey in 2009, consumers can use this throttle body fitting different Journey models, where cleaning or replacement of the associated parts such as the TPS sensor and IAC valve is adequately feasible. This makes a great contribution to the over all functional durability and dependability of the car. The Dodge Journey is famous for having the third row of seats, a rather large cabin, and tough safety solutions such as improved braking that contributes to the safety of the travelers. Being a performance oriented part, the Throttle Body helps to boost the functions of the automobile so that the Journey does not phase out as a family car. In conclusion, the Throttle Body captures the breath and essence of the demand that Dodge has put into constructing the Journey; thus, the TB perfectly fits the Journey's place in the enduring SUV market.

Dodge Journey Throttle Body Parts and Q&A

Throttle Body
4861691AA
Q: How to Service and Repair a Throttle Body on a 3.5L Engine on Dodge Journey?
A:
For service or repair of the throttle body on a 3.5L engine, start by disconnecting and isolating the negative Battery Cable. After that, take off the engine cover and the clean air hose from the throttle body. First, separate the connector from the throttle body, next take out the nut that holds the throttle bracket to the engine. Removing the bolt and the throttle body bracket comes after opening the air cleaner case. With the last bolt and stud removed, take out the rest of the throttle body connections to the Intake Manifold.
Throttle Body
4891735AD
Q: How to Install a Throttle Body on a 3.5L Engine on Dodge Journey?
A:
For installing the throttle body, clean, undamaged and debris-free the intake gasket and change it if it is in bad condition. Ensure to avoid excessive turning of torque, as doing so may hurt the throttle body, gaskets, bolts or the Intake Manifold. Put the throttle body on next to the gasket and stud bolts in the intake manifold, hand-tightening the three bolts and the one stud. Use the proper order for tightening, crossing from center to the edges and tighten to 5.5 Nm (50 in. lbs.). Next, put the throttle body bracket in place and screw in the nut until you reach 12 Nm (106 in. lbs.) tightness and the bolt to 28 Nm (20.5 ft. lbs.). Attach the electrical connector to the throttle body, fix the clean air hose and set up the engine cover. Lastly, secure the ground wire back on the battery, then tighten the nut using your manual to 5 Nm (45 in. lbs.). Finally, bring out the scan tool to initiate the Etc Relearn function.