How to install an oil pan on Dodge Journey?

The first step in installing the engine oil pan is to clean the oil pan and all the gaskets it will come into contact with. At the line where the oil pump housing and rear seal retainer join, add a 1/8 inch bead of Mopar(R) Engine RTV GEN II silicone. You should next put the oil pan gasket on the block, set the oil pan in place, apply 28 Nm (21 ft. lbs.) of torque to the pan bolts and tighten the pan-bell housing bolts to 55 Nm (40 ft. lb.). Swap the oil filter for one from Mopar(R) or a similar brand, also wiping down the clean the base and looking over the contact area of the gasket. Apply clean engine oil to the new filter's gasket, place the filter in position and use a filter wrench to fasten it by hand so that the tightening torque is 16 Nm (12 ft. lbs.). Put the vehicle on the ground and put in the oil pan drain bolt, tightening it to 27 Nm or 20 ft. lbs. Secure the front maniverter bolts, put in the crossover pipe and connect the front crossmember and then drop the vehicle to the ground again. Put in the oil level indicator tube and tighten the bolt holding it in place. Next, add the oil indicator, fill the crankcase with the oil called for and clip the negative battery cable.

How to remove an oil pan on Dodge Journey?

Before taking off the engine oil pan, unplug the negative battery cable. Then, extract the engine oil indicator and the bolt that holds it and next the engine oil indicator tube. Get the vehicle up and off the ground and then pull out the front crossmember. Once that's done, pull out the crossover pipe and loosen the front exhaust manifold. Go on to remove the oil pan bell housing bolts, drain the oil and take out the engine oil filter. Unscrew all the oil pan fasteners and take out the oil pan, since it may still be a little oily. Remember to get rid of the oil pan gasket.

OEM Dodge Journey Oil Pan

Oil Drain Pan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Oil Pans found

View related parts
Dodge Journey Oil Pan, Upper Part Number: 68051597AD
$302.51 MSRP: $450.00
You Save: $147.49 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan - Engine Oil; Engine Oil Pan, Upper; Upper Oil Pan; Pan Engine Oil
- Position: Upper
- Replaces: 68051597AB, 68051597AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2019 Dodge Journey | Crew, Crossroad, GT, Limited, Lux, Mainstreet, R/T, SE, SXT | 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Oil Pan Part Number: 4892447AA
$322.91 MSRP: $482.00
You Save: $159.09 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan - Oil; Engine Oil Pan; Pan Oil Refer To Illustration 105 For Julian Date Code Information; Pan Oil
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Journey | Crew, R/T, SXT | 6 Cyl 3.5 L GAS
View related parts
Dodge Journey Oil Pan, Lower Part Number: 5184404AG
$141.50 MSRP: $214.00
You Save: $72.50 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan - Engine Oil; Engine Oil Pan, Lower; Lower Oil Pan; Pan Engine Oil; Engine Oil Pan
- Position: Lower
- Replaces: 5184404AE, 5184404AD, 5184404AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2019 Dodge Journey | Crew, Crossroad, GT, Limited, Lux, Mainstreet, R/T, SE, SXT | 3.6L V6, 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Oil Pan Part Number: 4884665AF
$206.21 MSRP: $308.00
You Save: $101.79 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan - Engine Oil; Engine Oil Pan; Pan Engine Oil
- Replaces: 4884665AC, 4884665AE, 4884665AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2020 Dodge Journey | AVP, Base, Crossroad, Express, SE, SE Value, SXT | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Journey Oil Pan, Lower Part Number: 5184407AG
$156.10 MSRP: $236.00
You Save: $79.90 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan - Engine Oil; Engine Oil Pan, Lower; Lower Oil Pan; Pan Engine Oil Lower; Pan Engine Oil; Engine Oil Pan
- Position: Lower
- Replaces: 5184407AF, 5184407AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2012 Dodge Journey | Crew, Lux, Mainstreet, R/T, SXT | 6 Cyl 3.6 L FLEX

Dodge Journey Oil Pan

Choose OEM Oil Pan that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Oil Pan follows strict manufacturing steps to lock in quality and fit. If your Dodge Journey matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Journey parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Oil Pan is one of the vital parts that actively enhance the efficiency and durability of Dodge Journey automobiles. Located primarily as a store for engine oil, the Oil Pan is an essential component in the lubrication system to which the oil must be pumped to cool and coat the bearings and other moving parts in the engine. Nearly all Dodge Journey car models have a type of lubrication called Wet Sump, which pumps engine oil from the Oil Pan to maintain healthy engine functions. The Oil Pan has been changed over the years, and most manufacturing Dodge Journey cars are using the cast aluminum construction to increase durability and performance than stamped steel. Changing of this part also increases the durability of the Oil Pan and reduces oil leak incidences making the Dodge Journey safer and efficient to use. The ability to interchange parts with other Journey models facilitates owners' ability to guarantee the performance of the Oil Pan to support any model year of the engine. Moreover, the Dodge Journey is loved for its large passengers' cabin and innovative security mechanisms which added with the steady performance of the Oil Pan. Because it provides the necessary support for the engine requirements depending on its status, the Oil Pan is indeed appreciated in the automotive industry and reflects the company's prominent reputation for efficiency and durability. Taken together, the Oil Pan captures the vehicle's design concept, thus giving the driver an efficient and safe driving experience.

Dodge Journey Oil Pan Parts and Q&A

Oil Pan
4892447AA
Q: How to install an oil pan on Dodge Journey?
A:
The first step in installing the engine oil pan is to clean the oil pan and all the gaskets it will come into contact with. At the line where the oil pump housing and rear seal retainer join, add a 1/8 inch bead of Mopar(R) Engine RTV GEN II silicone. You should next put the oil pan gasket on the block, set the oil pan in place, apply 28 Nm (21 ft. lbs.) of torque to the pan bolts and tighten the pan-bell housing bolts to 55 Nm (40 ft. lb.). Swap the Oil Filter for one from Mopar(R) or a similar brand, also wiping down the clean the base and looking over the contact area of the gasket. Apply clean engine oil to the new filter's gasket, place the filter in position and use a filter wrench to fasten it by hand so that the tightening torque is 16 Nm (12 ft. lbs.). Put the vehicle on the ground and put in the oil pan drain bolt, tightening it to 27 Nm or 20 ft. lbs. Secure the front maniverter bolts, put in the crossover pipe and connect the front crossmember and then drop the vehicle to the ground again. Put in the oil level indicator tube and tighten the bolt holding it in place. Next, add the oil indicator, fill the crankcase with the oil called for and clip the negative Battery Cable.
Oil Pan
4884665AF
Q: How to remove an oil pan on Dodge Journey?
A:
Before taking off the engine oil pan, unplug the negative Battery Cable. Then, extract the engine oil indicator and the bolt that holds it and next the engine oil indicator tube. Get the vehicle up and off the ground and then pull out the front crossmember. Once that's done, pull out the crossover pipe and loosen the front Exhaust Manifold. Go on to remove the oil pan bell housing bolts, drain the oil and take out the engine Oil Filter. Unscrew all the oil pan fasteners and take out the oil pan, since it may still be a little oily. Remember to get rid of the oil pan gasket.