OEM Dodge Journey Yaw Sensor

Dodge Journey Yaw Sensor Parts and Q&A

• Yaw Rate Sensor
  56029429AA
  Q: How to Install a Yaw Sensor and Complete the Associated Steps on Dodge Journey?

  A:

  Place the dynamics sensor above the floor tunnel studs and install two nuts, tightening each to 9 Nm (80 in. lbs.). Following this, link the wiring harness connector to the dynamics sensor. Install the lower instrument panel trim piece on each side of the console beneath the instrument panel after that. Having linked the negative Battery Cable to the battery post, correctly complete the Verification Test to find and solve any problems.
• Yaw Rate Sensor
  56029482AA
  Q: How to Service and Repair a Yaw Sensor on Dodge Journey?

  A:

  First, isolate the battery's negative cable from the post to services and repair the Yaw Rate Sensor. After that, take off the lower instrument panel trim on both sides of the console beneath the instrument panel. Disconnect the connector that links the wiring harness with the dynamics sensor. After that, remove the nuts that hold the dynamics sensor onto the floor tunnel from each side of the vehicle's tunnel. After that, take out the dynamics sensor.