How to Install a Rear Door Latch Assembly on Dodge Magnum?

First, matches the door wire harness connector with the rear door latch and connect them together. Inside the open rear door, align the latch with the latch face, secure with the included fixings and fasten them all to 12 Nm (108 in. lbs.). Look in the back of the door shell to operate the exterior door handle release link. Likewise, tie together the end of the interior door handle latch release link and the door latch lever and secure them both with the plastic clip. Fit the interior door latch lock link and knob unit into the rear door, then push the interior door latch lock link's end onto the latch lever and attach it with the plastic clip. First, install the door glass channel and bracket, then screw in the watershield on the inside of the rear door and finally set the trim panel into place. Loosen the hex socket adjusting screw on the rear door latch by inserting a wrench through the small slot in the outer latch face. Force the door handle outside latch release up and down its full path two or three times, then adjust the tightness of the screw.

How to Remove and Repair a Rear Door Latch Assembly on Dodge Magnum?

Before pulling out the rear door latch, first detach the trim panel, then take out the watershield as well. Following that, take off the door glass channel and bracket. Push your hand in through the back of the door shell to unsnap the clip connecting the interior door latch lock link to the latch lever and then take the link from the latch. Take out the interior door latch lock link and knob unit from the rear door. Reach into the rear of the door shell and separate the linked plastic clip from the interior door handle latch. Do the same for the exterior door handle latch release link. Take out the three screws that hold the latch to the outer side of the rear door. After unscrewing the latch and removing every link, it becomes much easier to take out the wiring connector. After that, pull the latch toward you from inside the door shell and remove it, then disconnect the harness connector at the back of the door shell.

OEM Dodge Magnum Door Latch Assembly

Door Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Door Latch Assemblys found

View related parts
Dodge Magnum Lock Actuator, Rear Driver Side Part Number: 4575893AB
$157.80 MSRP: $210.00
You Save: $52.20 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Rear Door; Rear Left Door Latch Assembly; Lock Actuator Motor; Lock Actuator.; Lock; Latch
- Position: Rear Driver Side
- Replaces: 4575893AA, 4589043AC, 4589043AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Dodge Magnum | R/T, SE, SRT8, SXT, SXT Special Edition | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Magnum Lock Actuator, Front Driver Side Part Number: 4575895AB
$141.50 MSRP: $212.00
You Save: $70.50 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Front Door; Door Latch Assembly, Front Left; Lock Actuator Motor; Lock Actuator.; Latch
- Position: Front Driver Side
- Replaces: 4575895AA, 4589071AC, 4589071AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Dodge Magnum | R/T, SE, SRT8, SXT, SXT Special Edition | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Magnum Lock Actuator, Front Part Number: 4575894AA
$95.23 MSRP: $141.00
You Save: $45.77 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Front Door; Door Lock Actuator Motor; Door Lock Actuator; Door Lock; Latch Front Door
- Position: Front
- Replaced by: 4575894AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Dodge Magnum | R/T, SE, SRT8, SXT, SXT Special Edition | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Magnum Lock Actuator, Rear Part Number: 4575892AA
$139.65 MSRP: $189.00
You Save: $49.35 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Rear Door; Door Lock Actuator Motor; Door Lock Actuator; Door Lock; Latch Rear Door
- Position: Rear
- Replaced by: 4575892AB
- Replaces: 4589042AD, 4589042AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Dodge Magnum | R/T, SE, SRT8, SXT, SXT Special Edition | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Magnum Latch, Front Passenger Side Part Number: 4575894AB
Product Specifications
- Other Name: Latch - Front Door; Door Latch Assembly, Front Right; Door Latch Assembly; Door Lock Actuator; Door Lock
- Position: Front Passenger Side
- Replaces: 4589072AC, 4575894AA, 4589072AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Dodge Magnum | R/T, SE, SRT8, SXT, SXT Special Edition | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Magnum Lock, Rear Passenger Side Part Number: 4575892AB
Product Specifications
- Other Name: Latch - Rear Door; Rear Right Door Latch Assembly; Lock Actuator Motor; Lock Actuator.; Latch
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Dodge Magnum | R/T, SE, SRT8, SXT, SXT Special Edition | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

Dodge Magnum Door Latch Assembly

Choose OEM Door Latch Assembly that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Door Latch Assembly follows strict manufacturing steps to lock in quality and fit. If your Dodge Magnum matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Magnum parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Door Latch Assembly of Dodge Magnum cars has an important purpose of holding the doors of the car and locking it in order to avoid intruders from gaining access to the interior of the car. This assembly has the possibility of using different forms of locking which can be automatic or manual, where there is an opportunity to isolate the door locking either individually or collectively. Dodge Magnum How various styles of Door Latch Assembly were used over the years Part Description The styles of Door Latch Assembly have evolved over the years with the primary purpose of improving both the strength of the car doors and the ease of usage. However, these assemblies may need to be replaced due to common problems, most of which include sticking of the outer door handles, latches that do not release smoothly, or problems with the engaging and disengaging of the door lock button.

Dodge Magnum Door Latch Assembly Parts and Q&A

Lock Actuator, Rear
4575892AA
Q: How to Install a Rear Door Latch Assembly on Dodge Magnum?
A:
First, matches the door wire harness connector with the rear door latch and connect them together. Inside the open rear door, align the latch with the latch face, secure with the included fixings and fasten them all to 12 Nm (108 in. lbs.). Look in the back of the door shell to operate the exterior Door Handle release link. Likewise, tie together the end of the interior door handle latch release link and the door latch lever and secure them both with the plastic clip. Fit the interior door latch lock link and knob unit into the rear door, then push the interior door latch lock link's end onto the latch lever and attach it with the plastic clip. First, install the door glass channel and bracket, then screw in the watershield on the inside of the rear door and finally set the trim panel into place. Loosen the hex socket adjusting screw on the rear door latch by inserting a wrench through the small slot in the outer latch face. Force the door handle outside latch release up and down its full path two or three times, then adjust the tightness of the screw.
Lock Actuator, Rear Driver Side
4575893AB
Q: How to Remove and Repair a Rear Door Latch Assembly on Dodge Magnum?
A:
Before pulling out the rear door latch, first detach the trim panel, then take out the watershield as well. Following that, take off the door glass channel and bracket. Push your hand in through the back of the door shell to unsnap the clip connecting the interior door latch lock link to the latch lever and then take the link from the latch. Take out the interior door latch lock link and knob unit from the rear door. Reach into the rear of the door shell and separate the linked plastic clip from the interior door handle latch. Do the same for the exterior door handle latch release link. Take out the three screws that hold the latch to the outer side of the rear door. After unscrewing the latch and removing every link, it becomes much easier to take out the wiring connector. After that, pull the latch toward you from inside the door shell and remove it, then disconnect the harness connector at the back of the door shell.