OEM Dodge Neon Fuel Filler Neck

Dodge Neon Fuel Filler Neck Parts and Q&A

• Filler Neck
  5278998AA
  Q: How to Service and Repair a Fuel Filler Neck on Dodge Neon?

  A:

  Begin your service and repair of the fuel filler neck by first loosening the fuel filler tube cap. After that, take out the fuel filler neck screws and prop up the vehicle. Remove the wheel well splash shield and pull the fuel fill vapor tube and the fuel filler tube from the fuel tank. Take away the ground strap from the body and extract the filler neck. Installing starts with inserting the filler tube, after which you put in the fuel filler neck screws and finally the plastic filler cup. After disconnecting the fuel fill vapor tube, slide its end into the fuel tank, attaching it with the clamp securely tightened. Attach the ground strap to the body, lower the vehicle and end by adding the fuel filler tube cap.
• Filler Neck
  4546935AE
  Q: How to replace a Fuel Filler Neck on Dodge Neon?

  A:

  Before removing the fuel tank filler tube, loosen the fuel cap first. After that, take off the screws at the fuel filler neck and gently raise and support the vehicle. Remove the splash shield that's in the wheel well and separate the fuel fill vapor tube and fuel filler tube from the tank. Pull the ground strap from the body and remove the filler neck. Start the installation process by installing the filler tube, attaching it using the fuel filler neck screws and placing the plastic filler cup. Fix the fuel fill vapor tube and push the fuel filler pipe into the tank until you feel the clamp fitting tightly. Secure the ground wire to the metal frame again, lower the vehicle and then finish with the fuel filler tube cap.