How Is an Exhaust Pipe Installed on Dodge Nitro?

To mount the exhaust pipe, just put the exhaust pipe in the vehicle and snake the exhaust pipe hanger into the transmission support. Then go ahead and install the exhaust pipe to the catalytic converter flange using retaining nuts, but again, do not tighten at this point. At this point, mount the exhaust pipe to the muffler before you tighten. Ensure that the exhaust pipe and exhaust system are properly perpended with a minimum clearance of 25mm (1 inch) and correct, if necessary. Tighten the catalytic converter flange retaining nuts to 27 Nm (19 ft. lbs.) and the muffler mounting bolts to 31 Nm (23 ft. lbs.) once align. Therefore, install the oxygen sensors at the exhaust pipe and catalytic converter and connect the oxygen sensor connectors. Put the vehicle on stands, start the engine and check for any leaks and fix them. The final bit is to inspect the exhaust system and ensure that it does not contact body panels and make any required corrections.

How to Safely Remove an Exhaust Pipe on Dodge Nitro?

Always make sure to let the exhaust system cool before removing the exhaust pipe, since the catalytic converter can grow very hot. Be careful with torches and avoid bringing flames near any areas connected to fuel to avoid getting hurt. Start by putting the vehicle up, next spray all studs and nuts with Mopar(R) rust penetrant and wait for 5 minutes. The oxygen sensors can be taken out by first unplugging the sensors from the connectors. After that, undo the retaining nuts on the exhaust pie/catalytic converter and those on the exhaust pipe/muffler flange. In the end, move the exhaust pipe as far backward as possible so the hanger releases from the transmission support, then take it out of the car.

OEM Dodge Nitro Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Exhaust Pipes found

View related parts
Dodge Nitro Muffler & Pipe Part Number: 52125106AL
$1906.13 MSRP: $2900.00
You Save: $993.87 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Exhaust Pipe; Resonator; Muffler
- Replaces: 52125106AH, 52125106AJ, 52125106AI, 52125106AE, 52125106AF, 52125106AD, 52125106AG, 52125106AK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator, Heat, R/T, SXT, Shock | 4.0L V6, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro Catalytic Converter Part Number: 52125351AD
$3776.98 MSRP: $5520.00
You Save: $1743.02 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Exhaust; Exhaust Pipe; Converter & Pipe; Pipe And Converter Exhaust; Converter Catalytic
- Replaces: 52125351AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2011 Dodge Nitro | Heat, SE, SLT, SXT | 6 Cyl 3.7 L GAS
View related parts
Dodge Nitro Catalytic Converter Part Number: 68052257AB
$4607.10 MSRP: $6700.00
You Save: $2092.90 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Exhaust; Exhaust Pipe; Converter & Pipe; Pipe And Converter Exhaust
- Replaces: 68052257AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010-2011 Dodge Nitro | Heat, SE, SXT | 6 Cyl 3.7 L GAS
View related parts
Dodge Nitro Catalytic Converter Part Number: 52125332AF
$6571.93 MSRP: $9545.00
You Save: $2973.07 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Catalytic; Exhaust Pipe; Converter & Pipe; Converter Catalytic
- Replaces: 52125332AE, 52125332AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator, Heat, R/T, SXT, Shock | 4.0L V6, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro Muffler & Pipe Part Number: 52109806AI
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Exhaust Pipe; Resonator; Muffler
- Replaces: 52109806AG, 52109806AE, 52109806AF, 52109806AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Heat, SE, SLT, SXT | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Dodge Nitro Catalytic Converter Part Number: 52125219AE
Product Specifications
- Other Name: Converter - Catalytic; Exhaust Pipe; Converter & Pipe
- Replaces: 52125219AD, 52125219AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Nitro | SLT, SXT | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Dodge Nitro Catalytic Converter Part Number: 52109800AG
Product Specifications
- Other Name: Converter - Catalytic; Exhaust Pipe; Converter & Pipe
- Replaces: 52109800AD, 52109800AE, 52109800AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Nitro | SLT, SXT | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Dodge Nitro Catalytic Converter Part Number: 52125351AC
Product Specifications
- Other Name: Converter - Exhaust; Exhaust Pipe; Converter & Pipe; Pipe And Converter Exhaust
- Replaces: 52125351AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Nitro | SLT, SXT | 6 Cyl 3.7 L GAS

Dodge Nitro Exhaust Pipe

Choose OEM Exhaust Pipe that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Exhaust Pipe follows strict manufacturing steps to lock in quality and fit. If your Dodge Nitro matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Nitro parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Nitro exhaust pipe is one of those auto parts that is very vital given its function to the performance and safety of the vehicle. This exhaust pipe is manufactured exclusively for the Dodge Nitro vehicle; its role is to discharge toxic emissions from the engine while preventing their penetration into the passenger compartment, which is hazardous to people's health. The Dodge Nitro exhaust pipe fits well with the Nitro models manufactured between 2007 and 2012; it links with the other crucial parts such as the muffler and the catalytic converter to improve the performance of the car. The solidity gives a reassuring feel and design that speaks Dodge brand's reliability to the owners of Nitro vehicles. The part is exhaust pipe that requires constant checkups since corrosion or accidental damages may cause performance and safety problems. The Dodge Nitro exhaust pipe can be regarded as one of the most durable exhaust pipes in automotive, fender incorporated modern features that make the exhaust difficult to rust making it quite durable and efficient to use for a long time. Moreover, such emissions are also connected with the exhaust pipe which is also an essential aspect of preserving the transportation's safety in the era focused on environmental protection. He substitutes the exhaust pipe with the Dodge Nitro model, which delivers reliability, performance, compatibility with different Nitro models to offer the drivers improved driving experience, and the pursuit of the company's reputation for a quality and innovative compact SUV brand.

Dodge Nitro Exhaust Pipe Parts and Q&A

Catalytic Converter
52125332AF
Q: How Is an Exhaust Pipe Installed on Dodge Nitro?
A:
To mount the exhaust pipe, just put the exhaust pipe in the vehicle and snake the exhaust pipe hanger into the transmission support. Then go ahead and install the exhaust pipe to the catalytic converter flange using retaining nuts, but again, do not tighten at this point. At this point, mount the exhaust pipe to the Muffler before you tighten. Ensure that the exhaust pipe and exhaust system are properly perpended with a minimum clearance of 25mm (1 inch) and correct, if necessary. Tighten the catalytic converter flange retaining nuts to 27 Nm (19 ft. lbs.) and the muffler mounting bolts to 31 Nm (23 ft. lbs.) once align. Therefore, install the Oxygen Sensors at the exhaust pipe and catalytic converter and connect the oxygen sensor connectors. Put the vehicle on stands, start the engine and check for any leaks and fix them. The final bit is to inspect the exhaust system and ensure that it does not contact body panels and make any required corrections.
Catalytic Converter
52125351AD
Q: How to Safely Remove an Exhaust Pipe on Dodge Nitro?
A:
Always make sure to let the exhaust system cool before removing the exhaust pipe, since the Catalytic Converter can grow very hot. Be careful with torches and avoid bringing flames near any areas connected to fuel to avoid getting hurt. Start by putting the vehicle up, next spray all studs and nuts with Mopar(R) rust penetrant and wait for 5 minutes. The Oxygen Sensors can be taken out by first unplugging the sensors from the connectors. After that, undo the retaining nuts on the exhaust pie/catalytic converter and those on the exhaust pipe/Muffler flange. In the end, move the exhaust pipe as far backward as possible so the hanger releases from the transmission support, then take it out of the car.