How to Remove and Replace a Seat Cushion on Dodge Nitro?

First, attach the seat bottom to the seat back frame to remove the cushion. Place the seat frame bolts on the seat, tighten them with a torque wrench to 47.5 Nm (35 ft. lbs.) and make sure they are on the left and right sides of the bottom frame. For safety, on vehicles equipped with power, connect the recliner cable on the passenger side and attach the electrical harness to where it connects to the seat. When you have completed all screws in both seat rails, install the right and left track onto the seat frame and secure it with the nuts to 27.5 Nm (20 ft. lbs.). Attach the heated seat module with care so you don't damage the mounting tab and to keep it from binding. Drop the heated seat module into the car so the retaining tab fits into the hole left by the old seat, then push it down gently until it is fully seated. Attach the wire harness connector to the heated seat module after that and then mount the seat position sensor. Attach the outer seat trim by putting a screw at the side and at the rear. Link the handle to the recliner and connect the power plugs for the heated back and seat separately. Following installation of the electrical harness connectors on the OCS mounting plate, install the occupant classification module and connect the electrical connectors (if they are present on the passenger side). If the vehicle has seat weight sensors, fit them to the passenger seat. After that, add the passenger or driver's front seat.

OEM Dodge Nitro Seat Cushion

Seat Pad Cushion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Seat Cushions found

View related parts
Dodge Nitro Seat Cushion Pad, Rear Passenger Side Part Number: 68004482AA
$19.73 MSRP: $125.00
You Save: $105.27 (85%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seat Cushion; Seat Cushion Pad, Rear Left, Rear Right; Foam Seat Cushion 60% Cushion Foam; Foam Seat Cushion 60%
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro Seat Cushion Pad, Front Passenger Side Part Number: 68004570AA
Product Specifications
- Other Name: Seat Cushion; Seat Cushion Pad, Front, Front Right; Foam Seat Cushion
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro Seat Cushion Pad, Rear Passenger Side Part Number: 68004480AA
Product Specifications
- Other Name: Foam - Seat Cushion; Seat Cushion Pad, Rear Left, Rear Right; Foam Seat Cushion 40% Cushion Foam; Foam Seat Cushion 40%; Seat Cushion
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro Seat Cushion Pad, Front Driver Side Part Number: 68048355AA
Product Specifications
- Other Name: Foam - Seat Cushion; Seat Cushion Pad, Front Left; Foam Seat Cushion; Seat Cushion
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010-2011 Dodge Nitro | Detonator, Heat, SE, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro Seat Cushion Pad, Front Passenger Side Part Number: 68048358AA
Product Specifications
- Other Name: Foam - Seat Cushion; Seat Cushion Pad, Front Right; Foam Seat Cushion; Seat Cushion
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2011 Dodge Nitro | Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro Seat Cushion Pad, Front Driver Side Part Number: 68004569AA
Product Specifications
- Other Name: Foam - Seat Cushion; Seat Cushion Pad, Front Left; Foam Seat Cushion; Seat Cushion
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Nitro | R/T, SE, SLT, SXT | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

Dodge Nitro Seat Cushion

Choose OEM Seat Cushion that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Seat Cushion follows strict manufacturing steps to lock in quality and fit. If your Dodge Nitro matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Nitro parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Nitro Seat Cushion is an important part when it comes to furnishing comfort to the drivers who elite the Dodge Nitro that has acquired a good reputation in the market due to its excellent qualitative production. Fitted to a number of Nitro models manufactured between the years of 2007 and 2012, this Seat Cushion eliminated pains in the back area and tiredness thus making the car perfect for long travels. Dodge Nitro Seat Cushion comes in different portables and flexibility where Beaded type gives the comfort of massagers while Sheepskin type is delicate and personal. A car with Beaded Seat Cushions offers a massaging action which aids flow of blood and Sheepskin Seat Cushions are climaterically controlled hence regulate temperature and absorb moisture to give a comfortable ride in any season. This makes the Dodge Nitro have a firm structure, teamed with the ECG 3.7L V6 engine to complement with the Seat Cushion function to increase efficiency and safety of expectations to enable the driver concentrate on the traffic ahead of him. The Dodge Nitro Seat Cushion is a unique item in the automotive market, which is designed to fit in different Nitro models with great consideration and include a number of useful functions. This Seat Cushion thus enhances the comfort of the car and therefore its performance while at the same time increasing the comfort of the driver. The aspect of reliability is of outmost importance for compact SUV class and the Dodge Nitro Seat Cushion underlines the brand's values and the drivers' requirements for ultimate comfort and convenience parts for any Dodge Nitro vehicle.

Dodge Nitro Seat Cushion Parts and Q&A

Seat Cushion Pad, Rear Passenger Side
68004482AA
Q: How to Remove and Replace a Seat Cushion on Dodge Nitro?
A:
First, attach the seat bottom to the seat back frame to remove the cushion. Place the seat frame bolts on the seat, tighten them with a torque wrench to 47.5 Nm (35 ft. lbs.) and make sure they are on the left and right sides of the bottom frame. For safety, on vehicles equipped with power, connect the recliner cable on the passenger side and attach the electrical harness to where it connects to the seat. When you have completed all screws in both seat rails, install the right and left track onto the seat frame and secure it with the nuts to 27.5 Nm (20 ft. lbs.). Attach the heated seat module with care so you don't damage the mounting tab and to keep it from binding. Drop the heated seat module into the car so the retaining tab fits into the hole left by the old seat, then push it down gently until it is fully seated. Attach the wire harness connector to the heated seat module after that and then mount the seat position sensor. Attach the outer seat trim by putting a screw at the side and at the rear. Link the handle to the recliner and connect the power plugs for the heated back and seat separately. Following installation of the electrical harness connectors on the OCS mounting plate, install the occupant classification module and connect the electrical connectors (if they are present on the passenger side). If the vehicle has seat weight sensors, fit them to the passenger seat. After that, add the passenger or driver's front seat.