How to install the front Bumper Cover (fascia) on Dodge Ram 1500?

To install the front bumper cover or fascia, first ensure that the left and right inboard bumper to bracket attachments are secured. For ST/SLT/SLT+ models, install the fascia, position the close out panel, and fully seat the 6 lower clips. Next, install four new upper push pin fasteners, then position the step pad onto the fascia and fully seat the attachment clips. Align the fascia to the fender with a 19 mm (0.75 inch) gap and install two screws at each trailing edge of the fascia. For sport models, position the fascia onto the bumper, then position the step pad onto the fascia and fully seat the attachment clips. Install four new upper push pin fasteners, followed by five lower screws, and finally, install three screws at each trailing edge of the fascia.

How to remove the front Bumper Cover on Dodge Ram 1500?

To remove the front bumper fascia, begin by removing the three push pins and positioning the wheelhouse splash shield aside. Next, take out the fender screws. After that, remove the grille. Using trim stick C-4755 or an equivalent tool, separate the upper clips and remove the fascia. For the sport fascia, also remove the three push pins and set aside the wheelhouse splash shields, then remove the screws and separate the fascia from the fender. Proceed to remove the four lower fasteners and the grille, followed by using trim stick C-4755 or an equivalent tool to separate the upper clips and remove the fascia.

OEM Dodge Ram 1500 Bumper Cover

Bumper Shell

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

18 Bumper Covers found

View related parts
Dodge Ram 1500 Bumper Cover, Gray, Front Upper Part Number: 55077762AA
$172.22 MSRP: $255.00
You Save: $82.78 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Front Upper; Bumper Cover, Front; Upper Cover; Fascia Front Upper Primed; Fascia Front Bumper; Fascia Front Upper
- Position: Front Upper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Dodge Ram 1500 | Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Bumper Cover, Front Part Number: 5073002AC
$254.93 MSRP: $375.00
You Save: $120.07 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front Primed
- Position: Front
- Replaces: 5073002AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2005 Dodge Ram 1500 | Laramie, SLT, SRT-10, ST | 10 Cyl 8.3 L GAS, 3.7L V6, 4.7L V8, 5.9L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Bumper Cover, Front Part Number: 5013818AE
$567.92 MSRP: $828.00
You Save: $260.08 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front Primed
- Position: Front
- Replaces: 5013818AC, 5013818AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Dodge Ram 1500 | Laramie, SLT, Sport, ST, WS | 3.9L V6, 5.2L V8, 5.9L V8, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Bumper Cover, Front Upper Part Number: ZA17TZZAA
$172.22 MSRP: $254.00
You Save: $81.78 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Front Bumper; Bumper Cover, Front, Front Upper; Upper Cover; Upper Panel; Fascia Front Bumper Paint As Required; Fascia Front Bumper Upper; Fascia Front Bumper
- Position: Front Upper
- Replaces: ZA17CDMAA, ZA17WS2AA, ZA17GW7AA, ZA17ZBJAA, ZA17ARHAA, ZA17WB7AA, ZA17DX8AA, ZA17PR4AA, ZA17AJCAA, ZA17AXRAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Dodge Ram 1500 | Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Bumper Cover, Front Lower Part Number: 68001349AA
$286.65 MSRP: $422.00
You Save: $135.35 (33%)
ADD TO CART
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front, Front Lower
- Position: Front Lower
- Replaces: 1AT30TZZAB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Dodge Ram 1500 | Laramie, SLT, Sport, ST, SXT, TRX4 | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8.3L V10
View related parts
Dodge Ram 1500 Bumper Cover, Front Part Number: 5073001AF
$760.28 MSRP: $1110.00
You Save: $349.72 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front
- Position: Front
- Replaces: 5073001AE, 5073001AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Dodge Ram 1500 | Laramie, SLT, SRT-10, ST | 10 Cyl 8.3 L GAS, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS, 8.3L V10
View related parts
Dodge Ram 1500 Bumper Cover, Front Part Number: 68001358AA
$284.38 MSRP: $420.00
You Save: $135.62 (33%)
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front, Front Lower
- Position: Front
- Replaces: 1AT31TZZAB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Dodge Ram 1500 | Laramie, SLT, Sport, ST, SXT, TRX4 | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8.3L V10
View related parts
Dodge Ram 1500 Bumper Cover, Front Part Number: 1JS52TZZAA
$380.14 MSRP: $553.00
You Save: $172.86 (32%)
Product Specifications
- Other Name: Fascia - Front Bumper; Bumper Cover, Front; Fascia Front Bumper Paint As Required
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Ram 1500 | Laramie, SLT, ST, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Bumper Cover, Rear Center Part Number: 5JR41TZZAC
Product Specifications
- Other Name: Closeout - Rear; Bumper Cover, Rear, Rear Center; Fascia Rear
- Position: Rear Center
- Replaces: 5JR41CDMAC, 5JR41AXRAC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006, 2004 Dodge Ram 1500 | Laramie, SLT, SRT-10, ST | 10 Cyl 8.3 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Bumper Cover, Front Part Number: 5030101AB
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front Primed
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Dodge Ram 1500 | Laramie, SLT, SRT-10, ST | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Bumper Cover, Gray, Front Part Number: 55077355AC
Product Specifications
- Other Name: Plate - Front Bumper; Bumper Cover, Front; Fascia Front Bumper
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2004 Dodge Ram 1500 | Laramie, SLT, SRT-10, ST | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Bumper Cover, Front Part Number: 5016301AA
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front Primed
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2001 Dodge Ram 1500 | Laramie, SLT, ST, Sport, WS | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Bumper Cover, Gray, Front Part Number: 55077355AB
Product Specifications
- Other Name: Fascia - Front Bumper; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002 Dodge Ram 1500 | SLT, ST | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Bumper Cover, Gray, Rear Passenger Side Part Number: 5JR38TZZAC
Product Specifications
- Other Name: Closeout - Rear; Bumper Cover, Rear Right; Fascia Rear
- Position: Rear Passenger Side
- Replaces: 5JR38CDMAC, 5JR38AXRAC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2006 Dodge Ram 1500 | Laramie, SLT, SRT-10, ST | 10 Cyl 8.3 L GAS, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8.3L V10
View related parts
Dodge Ram 1500 Bumper Cover, Gray, Rear Driver Side Part Number: 5JR39TZZAC
Product Specifications
- Other Name: Closeout - Rear; Bumper Cover, Rear Left; Fascia Rear
- Position: Rear Driver Side
- Replaces: 5JR39AXRAC, 5JR39CDMAC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2006 Dodge Ram 1500 | Laramie, SLT, SRT-10, ST | 10 Cyl 8.3 L GAS, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8.3L V10
View related parts
Dodge Ram 1500 Bumper Cover, Front Part Number: 5073001AB
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front Primed
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002 Dodge Ram 1500 | SLT, ST | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Bumper Cover, Gray, Front Part Number: 68505649AA
Product Specifications
- Other Name: Bumper - Front; Bumper Face Bar, Front; Face Bar
- Position: Front
- Replaces: 1AR81ZSPAB, 1AR81ZSPAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Dodge Ram 1500 | 3.7L V6, 4.7L V8, 5.7L V8, 8.3L V10
- 2003-2004 Dodge Ram 1500
View related parts
Dodge Ram 1500 Bumper Cover, Front Lower Part Number: 5030013AE
Product Specifications
- Other Name: Fascia - Front Bumper; Bumper Cover, Front Lower
- Position: Front Lower
- Replaces: 5030013AD, 5030013AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Dodge Ram 1500 | SRT-10 | 10 Cyl 8.3 L GAS, 3.7L V6, 4.7L V8, 5.7L V8, 8.3L V10

Dodge Ram 1500 Bumper Cover

Choose OEM Bumper Cover that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Bumper Cover follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 1500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 1500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

A Dodge Ram 1500 Bumper Cover is a body piece that is molded and designed to protect the structural bumper while making the Dodge Ram 1500 look sharp. The Bumper Cover is located at the front or rear, concealing impact-absorbing parts and any tow eye anchor point. Therefore, if the Bumper Cover is damaged, the underlying bumper will not necessarily have failed. Constructed of flexible plastic, it presents an aerodynamically efficient front profile that can enhance the fuel efficiency of your vehicle by forwarding airflow towards the radiator, oil coolers, or brakes via dedicated openings. Cavities may hold fog lights, parking lights, or decorative inserts. Any unused cavity will be sealed off with a trim panel. Bumper Covers help replenish the protective and aesthetic qualities that may crack due to collision or road debris or fade due to long exposure to the sun. A Bumper Cover is an integral part of a complete bumper assembly that may also include a grille, light bezels, and tow hook cap. If any part is missing, the manufacturer sources them separately. Driving with a broken cover is dangerous as the damaged panels may not be able to deflect smaller hits anymore. Due to its ability to balance shielding, styling, and airflow distribution, the Dodge Ram 1500 continues to rely on this single integrated Bumper Cover solution.

Dodge Ram 1500 Bumper Cover Parts and Q&A

Bumper Cover, Gray, Front Upper
55077762AA
Q:
How to install the front Bumper Cover (fascia) on Dodge Ram 1500?
A:
To install the front bumper cover or fascia, first ensure that the left and right inboard bumper to bracket attachments are secured. For ST/SLT/SLT+ models, install the fascia, position the close out panel, and fully seat the 6 lower clips. Next, install four new upper push pin fasteners, then position the step pad onto the fascia and fully seat the attachment clips. Align the fascia to the fender with a 19 mm (0.75 inch) gap and install two screws at each trailing edge of the fascia. For sport models, position the fascia onto the bumper, then position the step pad onto the fascia and fully seat the attachment clips. Install four new upper push pin fasteners, followed by five lower screws, and finally, install three screws at each trailing edge of the fascia.
Bumper Cover, Front
1JS52TZZAA
Q:
How to remove the front Bumper Cover on Dodge Ram 1500?
A:
To remove the front bumper fascia, begin by removing the three push pins and positioning the wheelhouse splash shield aside. Next, take out the fender screws. After that, remove the grille. Using trim stick C-4755 or an equivalent tool, separate the upper clips and remove the fascia. For the sport fascia, also remove the three push pins and set aside the wheelhouse splash shields, then remove the screws and separate the fascia from the fender. Proceed to remove the four lower fasteners and the grille, followed by using trim stick C-4755 or an equivalent tool to separate the upper clips and remove the fascia.