How to Remove the Center Console on Dodge Ram 1500?

To take out the floor console first remove the side trim covers. Next, with trim stick C-4755 (or equivalent), remove the shift bezel trim ring and shift cable cover. Then take the screws out and the shifter bezel using the same trim stick. Take the shift cable end off of the shifter. Release the clip to detach the shift cable housing from the shifter. Proceed by removing the remaining screws and disconnecting the electrical connector of the power outlet, if it has one. Finally, disengage the electrical connectors and take out the centre console.

How to Install the Center Console on Dodge Ram 1500?

The floor console is placed in the vehicle over the support brackets where it is being installed. If equipped, connect the power outlet electrical connector. Now connect the electrical plugs 1, 2, and 3 then reposition the shift cable and secure the housing to the shifter assembly with part 1. Fully seat the cable end onto the shifter stud with part 2. Position the shift bezel with part 2 and ensure the retaining tabs are fully seated. Using part 1, install a screw and tighten it to a torque value of 7 Nm (62 in. lbs.) Using part 2, install the shift cable cover and fully seat the retaining clips. Utilize part 1 to position the trim ring and ensure that the retaining tabs are completely seated before using part 3 to install the screws, tightening them to 7 Nm (62 in. lbs.). To finish off the job, install screws with the use of part 1 and part 4 and position the trim to the side with part 1. Ensure the clips using part 2 are fully seated.

OEM Dodge Ram 1500 Center Console

Floor Console Assembly

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Center Consoles found

View related parts
Dodge Ram 1500 Storage Compart, Front Lower Part Number: 5GT27DX9AB
$68.32 MSRP: $101.00
You Save: $32.68 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Box/Bin - Floor Console; Console Compartment, Front Lower; Console Compartment; Console Tray; Bin; Bin Floor Console
- Position: Front Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2008 Dodge Ram 1500 | Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Console Base, Gray, Center Part Number: 1NN14XDVAB
$344.65 MSRP: $503.00
You Save: $158.35 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Console - Base; Center Console, Center; Center Console Base
- Position: Center
- Replaces: 1NN141DVAA, 1NN141D3AA, 1NN14XDVAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Ram 1500 | Laramie, SLT, Sport, ST, TRX, TRX4 | 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Console Base, Front Center Part Number: 5KK91ZJ8AA
Product Specifications
- Other Name: Console - Floor; Center Console, Center Front; Seat Console, Front; Center Console Base; Console; Console Floor Rear; Console Floor
- Position: Front Center
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Dodge Ram 1500 | Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Console Base, Slate Gray/Taupe, Front Center Part Number: 5KK91XDHAA
Product Specifications
- Other Name: Console - Floor; Center Console, Center Front; Seat Console, Front; Center Console Base; Console; Console Floor Rear; Console Floor
- Position: Front Center
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Dodge Ram 1500 | Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Console Base, Beige, Center Part Number: 1NN14DK2AB
Product Specifications
- Other Name: Console - Base; Center Console, Center; Center Console Base
- Position: Center
- Replaces: 1NN14DK2AA, 1NN141TVAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Ram 1500 | Laramie, SLT, Sport, ST, TRX, TRX4 | 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Console, Blue, Center Part Number: 5GT261QLAB
Product Specifications
- Other Name: Console - Floor; Center Console, Center, Center Front; Center Console Base; Console Floor
- Position: Center
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2003 Dodge Ram 1500 | Laramie, SLT, ST | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Console, Taupe, Front Center Part Number: 5GT26XDVAC
Product Specifications
- Other Name: Console - Floor; Center Console, Center, Center Front; Center Console Base
- Position: Front Center
- Replaces: 5GT261DVAC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2005 Dodge Ram 1500 | Laramie, SLT, SRT-10, ST | 10 Cyl 8.3 L GAS, 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS, 8.3L V10
View related parts
Dodge Ram 1500 Console, Gray, Front Center Part Number: 5GT26WL5AC
Product Specifications
- Other Name: Console - Floor; Center Console, Center, Center Front; Center Console Base
- Position: Front Center
- Replaces: 5GT261L5AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2005 Dodge Ram 1500 | Laramie, SLT, SRT-10, ST | 10 Cyl 8.3 L GAS, 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS, 8.3L V10

Dodge Ram 1500 Center Console

Choose OEM Center Console that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Center Console follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 1500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 1500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Ram 1500 Center Console organizes little things and houses critical controls. Placed between driver and front passenger seats, the Center Console functions as a container for money, phones, keys and other valuables, providing a handy location for the Ram 1500 driver during everyday travels. The Center Console runs from the dash toward the back of the cabin. Since they are integrated with the panels in Dodge interior, they can help to support the gear stick along the transmission tunnel. They can also accommodate additional controls like audio or temperature display. The Center Console of the Ram 1500 features several compartments for storage, cupholders, and a Center Console lid hinged design that latches for contents to stay secure. The excessive or repeated use of opening and closing action can damage the hinge or latch, and surface panel can crack, tear, fade, etc. This degradation can lessen the presence of the cabin or interior. A Dodge Center Console that is well-kept thus greatly contributes to the orderliness and comfort of the cabin so that every single trip on a Ram 1500 feels organized and convenient for the passengers of this Dodge pickup.

Dodge Ram 1500 Center Console Parts and Q&A

Console Base, Gray, Center
1NN14XDVAB
Q:
How to Remove the Center Console on Dodge Ram 1500?
A:
To take out the floor console first remove the side trim covers. Next, with trim stick C-4755 (or equivalent), remove the shift bezel trim ring and Shift Cable cover. Then take the screws out and the shifter bezel using the same trim stick. Take the shift cable end off of the shifter. Release the clip to detach the shift cable housing from the shifter. Proceed by removing the remaining screws and disconnecting the electrical connector of the power outlet, if it has one. Finally, disengage the electrical connectors and take out the centre console.
Console Base, Beige, Center
1NN14DK2AB
Q:
How to Install the Center Console on Dodge Ram 1500?
A:
The floor console is placed in the vehicle over the support brackets where it is being installed. If equipped, connect the power outlet electrical connector. Now connect the electrical plugs 1, 2, and 3 then reposition the Shift Cable and secure the housing to the shifter assembly with part 1. Fully seat the cable end onto the shifter stud with part 2. Position the shift bezel with part 2 and ensure the retaining tabs are fully seated. Using part 1, install a screw and tighten it to a torque value of 7 Nm (62 in. lbs.) Using part 2, install the shift cable cover and fully seat the retaining clips. Utilize part 1 to position the trim ring and ensure that the retaining tabs are completely seated before using part 3 to install the screws, tightening them to 7 Nm (62 in. lbs.). To finish off the job, install screws with the use of part 1 and part 4 and position the trim to the side with part 1. Ensure the clips using part 2 are fully seated.