How to Maintain the EGR Tube on Dodge Ram 1500?

Clean off the gasket material from the tube and where it is connected to begin the procedure on cab/chassis vehicles. Then, fir a new gasket (doughnut) at each end of the tube and place the EGR crossover tube inside the engine. Put the "P" clamp in the center of the EGR crossover tube and secure it with the "P" clamp bolt-don't tighten it yet. Turn the EGR tube clamp to 10 Nm (7 ft. lbs.) and then use that same torque on the other clamp. Screw the "P" clamp bolt into place using 10 Nm (7 ft. lbs.) and join the electrical connector to the EGR temperature sensor. Bolt the EGR valve cover to its mount and then put a heat shield above the valve, followed by tightening the final four bolts. Make sure to reconnect each negative battery cable to where it belongs.

How to Service and Repair the EGR Tube on Dodge Ram 1500?

Before starting to service or repair the EGR Tube in pick-up models, first remove and block both the negative battery cables as protection. Then, taking out the four bolts uncovers the EGR crossover tube cover. After that, remove the heat shield from the EGR valve. Unscrew and take out the clamps at the tube's ends and afterward eliminate the center clamp mounting screw. After that, take out the EGR Crossover Tube and tie or lay the gaskets aside for future purpose.

OEM Dodge Ram 1500 EGR Tube

EGR Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 EGR Tubes found

View related parts
Dodge Ram 1500 EGR Tube Part Number: 53032778AC
$142.62 MSRP: $215.00
You Save: $72.38 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube - EGR; Exhaust Gas Recirculation (EGR) Tube; Tube; Tube EGR
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Dodge Ram 1500 | Laramie, SLT, ST, TRX4 | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Ram 1500 Vacuum Harness, Lower Part Number: 52110233AD
$20.54 MSRP: $30.45
You Save: $9.91 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Vapor Canister Pass Through; Evap Emissions, Vacuum, Crankcase, PCV Hose; Canister Hose; Lower Hose; Upper Hose; By-Pass Hose; Tube; Hose Vapor Canister Pass Through
- Position: Lower
- Replaces: 52110233AB, 52110233AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Dodge Ram 1500 | Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8.3L V10
View related parts
Dodge Ram 1500 Tube Part Number: 53009189
$156.47 MSRP: $198.36
You Save: $41.89 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube - EGR; EGR Tube; EGR Tube for 5.2L & 3.9L Engines; Crossover Tube & Check Valve; E.G.R. Tube.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1997 Dodge Ram 1500 | Base, LT, Laramie, SS/T 5.9L, ST, Sport, WS | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 EGR Tube Part Number: 53032951AB
Product Specifications
- Other Name: Tube - EGR; Exhaust Gas Recirculation (EGR) Tube; EGR Pipe; Tube; Tube EGR
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Dodge Ram 1500 | ST, SXT
View related parts
Dodge Ram 1500 EGR Tube Part Number: 53032511AG
Product Specifications
- Other Name: EGR Tube - EGR; Exhaust Gas Recirculation (EGR) Tube; Tube; Tube EGR
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Dodge Ram 1500 | Laramie, SLT, ST, SXT, Sport, TRX4 | 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 EGR Tube Part Number: 53032853AC
Product Specifications
- Other Name: EGR Tube - EGR; Exhaust Gas Recirculation (EGR) Tube; Tube; Tube EGR
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Ram 1500 | SLT, ST, SXT, TRX, TRX4 | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Ram 1500 EGR Tube Part Number: 5192086AC
Product Specifications
- Other Name: EGR Tube - EGR; Tube; Tube EGR
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 1500 | SLT, ST, TRX, TRX4 | 8 Cyl 4.7 L FLEX

Dodge Ram 1500 EGR Tube

Choose OEM EGR Tube that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each EGR Tube follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 1500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 1500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Ram 1500 EGR Tube is a crucial part that demonstrates why the Dodge Ram 1500 is one of the best pickup trucks on the market. This EGR Tube is a critical component to minimize dangerous NOx advancement and guarantee engine proficiency and safety since it recirculates a portion of the exhaust gas back into the chamber. This EGR Tube fits the Chrysler Ram 1500 models well and is built to last so that the vehicle's engine is always running like a well-oiled machine. Dodge has over the years developed and adjusted the design and materials of the EGR Tube to avoid scenarios where the tube cracks or breaks because this can cause the engine to vibrate roughly during idling and greatly reduces the efficiency of engine. This means that proper servicing of the EGR Tube is important for the preservation of the engine's health as well as its performance level. The Dodge Ram 1500 is known for its durability and design that singles out full size pickup truck class as the best one. The conveniences include the Rambox system and the sophisticated OBD-II diagnostics which are additional perks that make the Ram 1500 even more desirable. The Dodge Ram 1500 EGR Tube assists the efficiency of the vehicle to perform well incorporating both the toughness and innovative architecture, and is healthy proof of Dodge's dedication to excellence of creating efficient trucks. In the stiff competition that the automotive industries has today, the Dodge Ram 1500 EGR Tube is a symbol of the brands success in providing quality and new products.

Dodge Ram 1500 EGR Tube Parts and Q&A

Vacuum Harness, Lower
52110233AD
Q: How to Maintain the EGR Tube on Dodge Ram 1500?
A:
Clean off the gasket material from the tube and where it is connected to begin the procedure on cab/chassis vehicles. Then, fir a new gasket (doughnut) at each end of the tube and place the EGR crossover tube inside the engine. Put the "P" clamp in the center of the EGR crossover tube and secure it with the "P" clamp bolt-don't tighten it yet. Turn the EGR tube clamp to 10 Nm (7 ft. lbs.) and then use that same torque on the other clamp. Screw the "P" clamp bolt into place using 10 Nm (7 ft. lbs.) and join the electrical connector to the EGR temperature sensor. Bolt the EGR Valve cover to its mount and then put a heat shield above the valve, followed by tightening the final four bolts. Make sure to reconnect each negative Battery Cable to where it belongs.
EGR Tube
53032951AB
Q: How to Service and Repair the EGR Tube on Dodge Ram 1500?
A:
Before starting to service or repair the EGR Tube in pick-up models, first remove and block both the negative battery cables as protection. Then, taking out the four bolts uncovers the EGR crossover tube cover. After that, remove the heat shield from the EGR Valve. Unscrew and take out the clamps at the tube's ends and afterward eliminate the center clamp mounting screw. After that, take out the EGR Crossover Tube and tie or lay the gaskets aside for future purpose.