How to Securely Remove the Engine Control Module (ECM) on Dodge Ram 1500?

The ECM 16 attaches securely to a bracket close to the fuel filter which is screwed onto the engine block with four capscrews and vibration isolators and is grounded to both the bracket and the engine block. Start by determining any DTC's stored in the ECM. Remember to first turn off the ignition key, cut negative power from the battery and then take out the ECM connectors. After that, unscrew the 50-way and 60-way connector bolts on the ECM using the female allen wrench; remove both connectors from the ECM as the bolt is unscrewed from it. In the end, unbolt the five mounting screws and pull the ECM out of the vehicle.

How to Install and Verify the Functionality of an Engine Control Module on Dodge Ram 1500?

Disconnect the ABS CAB temporarily before installing the PCM, to prevent DTC problems linked to the VIN during installation. After installing the PCM, go to the top menu on the scan tool and choose "1" to write the VIN from the engine to the PCM. After that, enter the VIN correctly, turn off the vehicle and reconnect the ABS module connector. Use the scan tool to enter the vehicle's VIN and mileage into the new PCM so that DTCs don't get triggered. Install the PCM into place and attach it to the engine block using the three bolts, adding the required amount of torque. Don't connect any cables until you check the PCM and 32- or 38-way connectors for damage or corrosion and all pins are at the same height. After assembling the three 32-way connectors (or four 38-way connectors if NGC is available), cover up the electrical connectors and link the negative cable back to the battery. On vehicles with a 5.7L V-8 engine, first hook up the negative battery cable, turn ON the ignition switch, leave it like that for 10 seconds and switch OFF after learning has finished. Should this step be skipped, a DTC will automatically be registered. Should you discover DTCs, use the scanner tool to remove them and verify the PCM has received the main engine information from the original VIN and mileage.

OEM Dodge Ram 1500 Engine Control Module

Engine Control Computer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

121 Engine Control Modules found

View related parts
Dodge Ram 1500 Transmission Controller Part Number: 5150283AB
$794.91 MSRP: $1195.00
You Save: $400.09 (34%)
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; Transmission Control Module; ECM; Module Powertrain Control Generic
- Replaces: RL150283AB, 5150283AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Ram 1500 | Laramie, SLT, ST, SXT | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Control Module Part Number: 5150498AA
$888.86 MSRP: $1305.00
You Save: $416.14 (32%)
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; PCM; ECM; Module Powertrain Control Generic
- Replaces: RL150498AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 1500 | ST | 6 Cyl 3.7 L GAS
View related parts
Dodge Ram 1500 Control Module Part Number: 5150500AA
$809.28 MSRP: $1245.00
You Save: $435.72 (35%)
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; PCM; ECM; Module Powertrain Control Generic
- Replaces: RL150500AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 1500 | Laramie, SLT, ST, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 ECM Part Number: 56040342AC
$603.75 MSRP: $1084.00
You Save: $480.25 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module
- Replaced by: R6040342AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2001 Dodge Ram 1500 | Laramie, ST, Sport, WS | 6 Cyl 3.9 L GAS
View related parts
Dodge Ram 1500 PCM Part Number: 5150389AF
$580.13 MSRP: $882.00
You Save: $301.87 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; ECM; Module Powertrain Control Generic
- Replaces: RL150389AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Dodge Ram 1500 | SLT, ST, TRX, TRX4 | 4.7L V8, 8 Cyl 4.7 L FLEX
View related parts
Dodge Ram 1500 Control Module Part Number: 5150275AB
$730.82 MSRP: $1110.00
You Save: $379.18 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; Transmission Control Module; Transmission Controller; PCM; ECM; Module Powertrain Control Generic
- Replaces: 5150248AC, 5150275AA, RL150275AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Ram 1500 | ST, SXT | 6 Cyl 3.7 L GAS
View related parts
Dodge Ram 1500 Control Module Part Number: 5150499AB
$673.36 MSRP: $1020.00
You Save: $346.64 (34%)
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; PCM; ECM; Module Powertrain Control Generic
- Replaces: 5150479AB, RL150499AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 1500 | SLT, ST, TRX, TRX4 | 8 Cyl 4.7 L FLEX
View related parts
Dodge Ram 1500 EEC Module Part Number: R6040201AG
$687.73 MSRP: $1040.00
You Save: $352.27 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; ECM
- Replaces: 56040201AG, 56040201AF, 56040201AB, 56040201AD, 56040201AC, RL040201AG, 56040201AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002 Dodge Ram 1500 | SLT, ST | 4.7L V8, 8 Cyl 4.7 L GAS
View related parts
Dodge Ram 1500 ECM Part Number: 56046342AE
$435.10 MSRP: $634.00
You Save: $198.90 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module
- Replaced by: 56046342AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998 Dodge Ram 1500 | Laramie, ST, Sport | 8 Cyl 5.2 L GAS
View related parts
Dodge Ram 1500 ECM Part Number: 56046340AF
$339.73 MSRP: $497.00
You Save: $157.27 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module
- Replaced by: R6046340AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998 Dodge Ram 1500 | Laramie, ST, Sport, WS | 6 Cyl 3.9 L GAS
View related parts
Dodge Ram 1500 ECM Part Number: 56046346AE
$460.29 MSRP: $670.00
You Save: $209.71 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module
- Replaced by: 56046346AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998 Dodge Ram 1500 | Laramie, SS/T 5.9L, ST, Sport | 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 ECM Part Number: 56046344AE
$402.85 MSRP: $584.00
You Save: $181.15 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module
- Replaced by: R6046344AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998 Dodge Ram 1500 | Laramie, ST, Sport | 8 Cyl 5.2 L GAS
View related parts
Dodge Ram 1500 ECM Part Number: 56046345AD
$520.79 MSRP: $755.00
You Save: $234.21 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module
- Replaced by: R6046345AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998 Dodge Ram 1500 | Laramie, SS/T 5.9L, ST, Sport | 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 ECM Part Number: 56040366AC
$632.38 MSRP: $917.00
You Save: $284.62 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module
- Replaced by: R6040366AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2001 Dodge Ram 1500 | Laramie, SLT, ST, Sport | 8 Cyl 5.2 L GAS
View related parts
Dodge Ram 1500 ECM Part Number: 56040137AC
$632.38 MSRP: $917.00
You Save: $284.62 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module
- Replaced by: R6040137AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999 Dodge Ram 1500 | Laramie, ST, Sport | 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 ECM Part Number: 56040352AC
$649.55 MSRP: $942.00
You Save: $292.45 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module
- Replaced by: R6040352AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2001 Dodge Ram 1500 | Laramie, ST, Sport, WS | 6 Cyl 3.9 L GAS
View related parts
Dodge Ram 1500 Control Module Part Number: R5150255AC
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; PCM; ECM; Module Powertrain Control Generic
- Replaces: 5150255AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Ram 1500 | SLT, ST, SXT | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Ram 1500 EEC Module Part Number: R4886905
Product Specifications
- Other Name: Module - Engine Controller; Engine Control Module; ECM
- Replaces: 4886905, 4886837
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996 Dodge Ram 1500 | Base | 6 Cyl 3.9 L GAS
View related parts
Dodge Ram 1500 PCM Part Number: 5150307AC
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; ECM; Module Powertrain Control
- Replaces: RL150307AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Ram 1500 | SLT, ST, SXT | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Ram 1500 EEC Module Part Number: R6040060AG
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; ECM
- Replaces: 56040060AG, 56040060AF, RL040060AG, 56040060AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999 Dodge Ram 1500 | Laramie, ST, Sport, WS | 6 Cyl 3.9 L GAS

| Page 1 of 7 |Next >

1-20 of 121 Results

Dodge Ram 1500 Engine Control Module

Choose OEM Engine Control Module that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Engine Control Module follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 1500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 1500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Many people know that Dodge Ram 1500 ECM is the electronic control unit that regulates the workload of the Ram 1500 engine on different models of cars. This Engine Control Module which is also is known as digital motor electronics (DME) or engine control unit (ECU) has a significant role within the management of the important engine tasks with the help of the signals of various sensors. It modifies the fuel and air mixes, sparks ignition coils, and controls an air fuel mixture, idle speed, and the variable valve timing to improve the power and quality of the cars. The Dodge Ram 1500 ECM fits different models, which makes the choice rather wide for owners who want to keep their car's integrities. What is more, modern ECMs also enable such functions as real-time monitoring of the car and performance tuning, which places the Dodge Ram 1500 among the leaders in the automotive industry. Due to the storage of program instructions and the capacity to adjust how the car performs when responding to certain drive conditions, the Engine Control Module is instrumental in the efficiency of the Ram 1500 and propositions for power and fuel efficiency for the driver. Besides, the Dodge Ram 1500 has been particularly dynamic year by year, notably for adding the Rambox system and keyless drive. Hence, the presence and quality of the Dodge Ram 1500 Engine Control Module continue to define how strong the Dodge truck enthusiasts require when driving the specific model.

Dodge Ram 1500 Engine Control Module Parts and Q&A

Transmission Controller
5150283AB
Q: How to Securely Remove the Engine Control Module (ECM) on Dodge Ram 1500?
A:
The ECM 16 attaches securely to a bracket close to the fuel filter which is screwed onto the engine block with four capscrews and vibration isolators and is grounded to both the bracket and the engine block. Start by determining any DTC's stored in the ECM. Remember to first turn off the ignition key, cut negative power from the battery and then take out the ECM connectors. After that, unscrew the 50-way and 60-way connector bolts on the ECM using the female allen wrench; remove both connectors from the ECM as the bolt is unscrewed from it. In the end, unbolt the five mounting screws and pull the ECM out of the vehicle.
EEC Module
R5094275AE
Q: How to Install and Verify the Functionality of an Engine Control Module on Dodge Ram 1500?
A:
Disconnect the ABS CAB temporarily before installing the PCM, to prevent DTC problems linked to the VIN during installation. After installing the PCM, go to the top menu on the scan tool and choose "1" to write the VIN from the engine to the PCM. After that, enter the VIN correctly, turn off the vehicle and reconnect the ABS module connector. Use the scan tool to enter the vehicle's VIN and mileage into the new PCM so that DTCs don't get triggered. Install the PCM into place and attach it to the engine block using the three bolts, adding the required amount of torque. Don't connect any cables until you check the PCM and 32- or 38-way connectors for damage or corrosion and all pins are at the same height. After assembling the three 32-way connectors (or four 38-way connectors if NGC is available), cover up the electrical connectors and link the negative cable back to the battery. On vehicles with a 5.7L V-8 engine, first hook up the negative Battery Cable, turn ON the ignition switch, leave it like that for 10 seconds and switch OFF after learning has finished. Should this step be skipped, a DTC will automatically be registered. Should you discover DTCs, use the scanner tool to remove them and verify the PCM has received the main engine information from the original VIN and mileage.