Before you handle the front engine mount, discharge the negative battery cable, open the hood and move the fan to ensure the radiator top tank and hose will not be obstructed. Lift the vehicle with a hoist after adding Engine Support Fixture Tool C-3487-A. Take the nuts out of the brackets and insulators, then lift the engine with the support fixture enough to free the mounts. During installation, with the engine above the chassis, mount the insulators and brackets, after that, bring the engine lower while steering the insulator studs into the holes on the crossmember and brackets. Set each attaching nut to 102 Nm (75 ft. lbs.) and each bolt to 88 Nm (68 ft. lbs.). Raise the car again, remove the support for the engine, rest the fan in its intended place and link the battery's negative cable back to the engine.