OEM Dodge Ram 1500 Van Speed Sensor

Dodge Ram 1500 Van Speed Sensor Parts and Q&A

• ABS Sensor, Rear
  56028187AE
  Q: How to remove and install the rear wheel speed sensor on Dodge Ram 1500 Van?

  A:

  The unit for the rear wheel speed sensor is fixed on top of the rear axle differential housing. Raise and secure the vehicle before pulling the wire off the rear sensor fitted to the axle housing. After that, take out the sensor by removing the sensor and bracket mounting bolt. Make sure to attach the sensor wire to the rear brake hose with the clips and then secure the sensor and bracket to the axle housing, fastening the bolt with 24 Nm (18 ft. lbs.) of force. Join the wire to the sensor and attached it to the bracket before taking away the support and lowering the vehicle.
• Vehicle Speed Sensor
  56028183
  Q: How to service the front wheel speed sensor on Dodge Ram 1500 Van?

  A:

  The front wheel speed sensor should be serviced after raising and supporting the vehicle. First, disconnect the sensor from the main harness, then remove its fixing bolt from the steering knuckle. Remove the speed sensor after that. When installing, use only the motorcycle's factory bolt to secure the sensor. Install the sensor into the steering knuckle, fasten it with the mounting bolt tightly at 15 Nm (11 ft. lbs.) and join the sensor wire to the main harness so that it is not amid hot or moving parts. Afterward, eliminate the undercarriage supports and slowly lower the car.