The first step to service the front
Fender liner is to open the hood, then remove any wiring or holder clips from the front splash shield 4 when applicable. Remove the jack, then take off the eight screws 3 that hold the front splash shield to the fender rail 1 and the fender 2 at the front. Part the protective shield from the bracket on the front
Bumper and take out the splash shield. The first step is to install the front edge of splash shield 4 inside the front bumper's support bracket. Align the splash shield along the front of the fender rail 1 and front fender 2, then insert all eight screws 3 to secure it, turning each one to 5 N.m (44 in.lbs.). After that, lower the car and install the wiring or component clips to the front splash shield, only if directed by the manufacturer in the project you are performing.