How to Install a Yaw Sensor on Dodge Ram 1500?

The yaw rate sensor should be placed on the firm mounting studs before proceeding. Following that, screw in the mounting nuts and tighten them to 24 Nm (200 in. lbs.). Once the sensor is installed, rezip the electrical connector. Once everything else is done, place the cup holder back in place and install the center bezel lower trim panel as well.

OEM Dodge Ram 1500 Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Yaw Sensor found

View related parts
Dodge Ram 1500 Yaw Rate Sensor Part Number: 56038967AA
Product Specifications
- Other Name: Sensor - Dynamics; Module; Sensor Dynamics Lateral Acceleration And Yaw Rate
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Ram 1500 | Laramie, SLT, ST, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L GAS

Dodge Ram 1500 Yaw Sensor

Choose OEM Yaw Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Yaw Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 1500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 1500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Ram 1500 Yaw Sensor Parts and Q&A

Yaw Rate Sensor
56038967AA
Q: How to Install a Yaw Sensor on Dodge Ram 1500?
A:
The yaw rate sensor should be placed on the firm mounting studs before proceeding. Following that, screw in the mounting nuts and tighten them to 24 Nm (200 in. lbs.). Once the sensor is installed, rezip the electrical connector. Once everything else is done, place the Cup Holder back in place and install the center bezel lower trim panel as well.