How to Service and Repair an Exhaust Hanger for a 5.9L Diesel on Dodge Ram 2500?

Before fixing or repairing the exhaust pipe and muffler hanger for the 5.9L diesel, you should first take out the negative battery cable and lift the vehicle. Cover the clamp nuts with heat valve lubricant, let it soak in for about five minutes. Free the exhaust tailpipe support hanger isolators, detach the muffler-to-tailpipe clamps and remove the tailpipe from where it is located in the vehicle. Look at all the components, throw out any clamps or supports that are rusty or damaged and use original or similar parts to guarantee proper setup and lower noise from the exhaust. Put the end of the tailpipe into the muffler, then drop the tailpipe hanger rods into the rubber isolators. Slide the clamp on the exhaust, make sure the system is lined up and tighten it to 48 Nm (35 ft. lbs.) torque. Lower the vehicle, link the battery back to its negative terminals and run the engine while examining for exhaust leaks and possible contact points between the exhaust and the rest of the vehicle.

OEM Dodge Ram 2500 Exhaust Hanger

Exhaust Tail Pipe Hanger

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Exhaust Hangers found

View related parts
Dodge Ram 2500 Muffler Insulator, Rear Part Number: 52103718AB
$16.12 MSRP: $24.00
You Save: $7.88 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Exhaust Support; Exhaust System Hanger, Rear; Muffler Hanger Strap; Exhaust Insulator; Exhaust Hanger; Rear Insulator; various exhaust insulators and supports for pipes and mufflers.
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2009 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Muffler & Pipe Insulator, Rear Part Number: 52128501AA
$26.84 MSRP: $39.65
You Save: $12.81 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Isolator - Exhaust Support; Exhaust System Hanger, Rear; Exhaust Insulator; Exhaust Hanger; Stabilizer Bar Insulator; Muffler & Pipe Hanger; Isolator Exhaust Support.
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Dodge Ram 2500 | Power Wagon | 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Muffler Insulator, Center Part Number: 52103717AB
$16.12 MSRP: $24.00
You Save: $7.88 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Isolator - Exhaust Support; Exhaust Hanger, Center/Front/Rear; Mount Bushing; Strap; Insulator; Rear Insulator; Multiple use exhaust support for muffler and tailpipe.
- Position: Center
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Front Pipe Isolator Part Number: 52014091AE
$26.62 MSRP: $39.30
You Save: $12.68 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Exhaust Support; Center Front, Front, Rear Hangers; Exhaust Mount Bushing; Exhaust Insulator.; Converter Isolator; Exhaust Support Muffler Inlet; 3 Hole Mount; Tailpipe Isolator.
- Position: Front
- Replaces: 52014091AC, 52014091AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 5.7L V8, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Front Pipe Bracket Part Number: 52121889AB
$41.90 MSRP: $61.55
You Save: $19.65 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Exhaust; Exhaust System Hanger Bracket; Exhaust Hanger; Bracket Exhaust Manifold Pipe
- Replaces: 52121889AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Ram 2500 | Laramie, SLT, ST, SXT | 6 Cyl 6.7 L DIESEL, 6.7L L6
View related parts
Dodge Ram 2500 Exhaust Pipe Bracket Part Number: 52103595AB
Product Specifications
- Other Name: Bracket - Exhaust; Exhaust System Hanger; Exhaust Bracket; Exhaust Hanger; Bracket; Bracket Exhaust Manifold Pipe; Bracket Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2009 Dodge Ram 2500 | Laramie, SLT, ST, Sport, TRX4 | 6 Cyl 5.9 L DIESEL

Dodge Ram 2500 Exhaust Hanger

Choose OEM Exhaust Hanger that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Exhaust Hanger follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 2500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 2500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

One part that cannot be overemphasized is the Dodge Ram 2500 Exhaust Hanger which is a reinforcement that expresses the sturdiness and efficiency of the Dodge Ram 2500 series. Intended for the attachment of the Exhaust System, this Exhaust Hanger eliminates chances of accidental contact with other parts of the Car and thus, shields the Cabin against abrasive noises and Vibrations. This part exhaust hanger is manufactured from high quality rubber that can endure the vices of the harshest working environments with absolutely no compromise on its quality. Daily I&I Checks of Exhaust Hanger is important because corrosion of the exhaust hanger will produce loud exhaust sound and possibly exert pressure on exhaust system affecting efficiency and safety. The Exhaust Hanger is thus appropriate for the Dodge Ram 2500 since it works with different models of the car. Regarding its function in reducing engine vibration, apart from delivering superior ride quality, it also has the effect of increasing the durability of exhaust system parts. As it can be observed, the product identified - Dodge Ram 2500 Exhaust Hanger - is unique among automotive parts due largely to the materials used and the durability and dependability of the product. As a result, the Dodge Ram 2500 has remained a highly recommended pick up truck for those who need a vehicle that can perform efficiently on the road, and the Exhaust Hanger is a part and parcel of it.

Dodge Ram 2500 Exhaust Hanger Parts and Q&A

Muffler Insulator, Rear
52103718AB
Q: How to Service and Repair an Exhaust Hanger for a 5.9L Diesel on Dodge Ram 2500?
A:
Before fixing or repairing the Exhaust Pipe and muffler hanger for the 5.9L diesel, you should first take out the negative Battery Cable and lift the vehicle. Cover the clamp nuts with heat valve lubricant, let it soak in for about five minutes. Free the exhaust tailpipe support hanger isolators, detach the muffler-to-tailpipe clamps and remove the tailpipe from where it is located in the vehicle. Look at all the components, throw out any clamps or supports that are rusty or damaged and use original or similar parts to guarantee proper setup and lower noise from the exhaust. Put the end of the tailpipe into the muffler, then drop the tailpipe hanger rods into the rubber isolators. Slide the clamp on the exhaust, make sure the system is lined up and tighten it to 48 Nm (35 ft. lbs.) torque. Lower the vehicle, link the battery back to its negative terminals and run the engine while examining for exhaust leaks and possible contact points between the exhaust and the rest of the vehicle.