How to Service and Repair a Tail Pipe on Dodge Ram 2500?

First, detach the vehicle's battery negative cables and use a jack to lift it before working on the exhaust pipe. Smear heat valve lubricant onto the clamp nuts and let it sit for 5 minutes. After that, take out the exhaust tailpipe support hanger isolators and remove all clamps securing the muffler to the tailpipe before pulling the tailpipe away from the car. If clamps, supports or attachments are rusted or worn during inspection, get rid of them and use replacements to ensure everything is aligned properly and doesn't cause too much noise. To install, feed the tailpipe into the muffler and then put the tailpipe hanger rods into the isolators. Screw the exhaust clamp shut, fit the exhaust system carefully and tighten the clamp using 48 Nm (35 ft. lbs.) torque. Once the lowering is complete, reposition the negative battery cables, turn on the car, watch for leaks in the exhaust and contact with the bodywork and fix them if spotted.

How to Install a Tail Pipe on a 5.7L Engine on Dodge Ram 2500?

Align all the pieces in the exhaust tailpipe loosely before you tighten everything for installation on a 5.7L engine. After that, join the support hangers and position the exhaust tailpipe so it does not touch the underbody parts. Tighten all clamp nuts so they reach 54 Nm (40 ft. lbs.), then check that the exhaust system is clear from the body panels, with at least 25 mm (1.0 in.) between each part. After the ride, bring the vehicle lower so you can start the engine and look for any leaks from the exhaust system. Fix any issues you see.

OEM Dodge Ram 2500 Tail Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

18 Tail Pipes found

View related parts
Dodge Ram 2500 Tail Pipe Part Number: 52121429AE
$383.58 MSRP: $564.00
You Save: $180.42 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Tail Pipe; Exhaust Pipe; Tailpipe; Tailpipe Exhaust
- Replaces: 52121429AC, 52121429AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Ram 2500 | Laramie, SLT, ST, SXT, TRX | 6 Cyl 6.7 L DIESEL, 6.7L L6
View related parts
Dodge Ram 2500 Tail Pipe Part Number: 52103515AD
$478.66 MSRP: $606.79
You Save: $128.13 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Tail Pipe; Exhaust Pipe; Tailpipe; Tailpipe Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2004 Dodge Ram 2500 | Laramie, SLT, ST | 6 Cyl 5.9 L DIESEL
View related parts
Dodge Ram 2500 Tail Pipe Part Number: 52122020AA
$439.08 MSRP: $624.00
You Save: $184.92 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tailpipe - Exhaust; Exhaust Tail Pipe; Exhaust Pipe; Tailpipe; Tailpipe Exhaust
- Replaces: 52103513AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2009 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Tail Pipe Part Number: 68055745AB
$268.52 MSRP: $399.00
You Save: $130.48 (33%)
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Tail Pipe; Exhaust Pipe; Tailpipe; Tailpipe Exhaust
- Replaces: 68055745AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 2500 | Laramie, SLT, ST, SXT, TRX | 6 Cyl 6.7 L DIESEL, 6.7L L6
View related parts
Dodge Ram 2500 Tail Pipe Part Number: 52121603AB
$268.52 MSRP: $399.00
You Save: $130.48 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Tail Pipe; Exhaust Pipe; Tailpipe; Tailpipe Exhaust
- Replaces: 52121603AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2009 Dodge Ram 2500 | Laramie, SLT, ST, Sport, TRX4 | 5.9L L6, 6 Cyl 5.9 L DIESEL
View related parts
Dodge Ram 2500 Tail Pipe Part Number: E0047709
$12.08 MSRP: $15.32
You Save: $3.24 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Exhaust; Exhaust Pipe; Tailpipe; Pipe, Tail
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995 Dodge Ram 2500 | Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Tail Pipe Part Number: 52022035
Product Specifications
- Other Name: Pipe - Exhaust; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Tailpipe; Tailpipe Exhaust; Pipe, Tail
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1997 Dodge Ram 2500 | Base | 6 Cyl 5.9 L DIESEL
View related parts
Dodge Ram 2500 Muffler Part Number: 52103014
Product Specifications
- Other Name: Direct-Fit Exhaust; Exhaust System Kit; Resonator; Muffler Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1996 Dodge Ram 2500 | Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS
View related parts
Dodge Ram 2500 Muffler Part Number: 52019323
Product Specifications
- Other Name: Muffler Exhaust; Direct-Fit Exhaust; Exhaust System Kit; Resonator
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-2002 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Muffler Part Number: 52103146
Product Specifications
- Other Name: Muffler Exhaust; Resonator
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-1999 Dodge Ram 2500 | Base | 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Tail Pipe Part Number: 52103102
Product Specifications
- Other Name: Pipe Exhaust; Exhaust Pipe; Tailpipe; Pipe, Tail
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-1999 Dodge Ram 2500 | Base | 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Tail Pipe Part Number: 52103095AB
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Pipe; Tailpipe; Tailpipe Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2002 Dodge Ram 2500 | Base | 6 Cyl 5.9 L DIESEL
View related parts
Dodge Ram 2500 Tail Pipe Part Number: 52103094
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Tail Pipe; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Tailpipe; Tailpipe Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2002 Dodge Ram 2500 | Base | 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Muffler Part Number: 52103017
Product Specifications
- Other Name: Direct-Fit Exhaust; Exhaust System Kit; Resonator; Muffler Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1997 Dodge Ram 2500 | Base | 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Tail Pipe Part Number: 52022036
Product Specifications
- Other Name: Pipe; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Tailpipe; Tailpipe Exhaust; Pipe, Tail
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1997 Dodge Ram 2500 | Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Extension Pipe Part Number: 52021020
Product Specifications
- Other Name: Pipe Muffler To Tailpipe; Exhaust Pipe; Pipe, Extension, Muffler To Tailpipe; Pipe Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1997 Dodge Ram 2500 | Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Tail Pipe Part Number: 52020014
Product Specifications
- Other Name: Pipe, Tail; Exhaust Pipe; Tailpipe; Tailpipe Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1997 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Tail Pipe Part Number: 68194261AA
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Tail Pipe; Exhaust Resonator and Pipe Assembly; Resonator Assembly; Exhaust Pipe; Tailpipe; Tailpipe Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 8 Cyl 5.7 L GAS

Dodge Ram 2500 Tail Pipe

Choose OEM Tail Pipe that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Tail Pipe follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 2500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 2500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Ram 2500 Tail Pipe is an exhaust part, composed in a professional way, which is aimed at placing exhaust gases from the engine and venting it directly into the atmosphere at the rear part of the vehicle. The Dodge Ram 2500 Tail Pipe is famous because of its quality, design, and effectiveness; this part thus augments the truck's performance boosting the efficiency of the Ram 2500's engine while minimizing untoward smo. This tail pipe is available in multiple designs and different manufacturers of Ram 2500; the cuts are made either in straight form, or in angulated form depending on what the user desires, be it in design or functionality. Not only is the Dodge Ram 2500 Tail Pipe functional but, it also comes with an aesthetic design in the likes of decorative chromed tips. A benefit of this design may be the flexibility that that its' design allows every model to have different exit points at the rear bunker or sideway according to market trends. Looking at the history of Dodge Ram 2500 Tail Pipe, it can be seen that improvements have been made over the years to make it fit the increasing technological standards in the world of automobile. This commitment to quality and performance puts the Dodge Ram 2500 on top in the benchmarks of the full-size pickup market. In the automotive business, the use of high-quality materials and special attention paid to the truck's design make Dodge Ram 2500 Tail Pipe unique among other models of cars and an example of the Dodge brand's reliability and creativity.

Dodge Ram 2500 Tail Pipe Parts and Q&A

Tail Pipe
52103094
Q: How to Service and Repair a Tail Pipe on Dodge Ram 2500?
A:
First, detach the vehicle's battery negative cables and use a jack to lift it before working on the Exhaust Pipe. Smear heat valve lubricant onto the clamp nuts and let it sit for 5 minutes. After that, take out the exhaust tailpipe support hanger isolators and remove all clamps securing the muffler to the tailpipe before pulling the tailpipe away from the car. If clamps, supports or attachments are rusted or worn during inspection, get rid of them and use replacements to ensure everything is aligned properly and doesn't cause too much noise. To install, feed the tailpipe into the muffler and then put the tailpipe hanger rods into the isolators. Screw the exhaust clamp shut, fit the exhaust system carefully and tighten the clamp using 48 Nm (35 ft. lbs.) torque. Once the lowering is complete, reposition the negative Battery Cables, turn on the car, watch for leaks in the exhaust and contact with the bodywork and fix them if spotted.
Tail Pipe
52121429AE
Q: How to Install a Tail Pipe on a 5.7L Engine on Dodge Ram 2500?
A:
Align all the pieces in the exhaust tailpipe loosely before you tighten everything for installation on a 5.7L engine. After that, join the support hangers and position the exhaust tailpipe so it does not touch the underbody parts. Tighten all clamp nuts so they reach 54 Nm (40 ft. lbs.), then check that the exhaust system is clear from the body panels, with at least 25 mm (1.0 in.) between each part. After the ride, bring the vehicle lower so you can start the engine and look for any leaks from the exhaust system. Fix any issues you see.