How to Service and Repair the Neutral Safety Switch on Dodge Ram 2500?

To perform any battery desulfation or repair to the Transmission Position Switch/Sensor, first lift the car and install a drain pan below the Transmission Range Sensor (TRS). Shift the manual lever to the LOW position which is closest to you. Unplug the connection at the TRS and then remove both of the screws holding the TRS to the bracket. Pull the TRS completely out of the bracket and use Adapter 8581 to loosen the TRS mounting bracket in the transmission case. Take out the TRS bracket from the transmission case. Turn the transmission manual shaft lever into the manual low setting and install the TRS mounting bracket into the transmission case, applying 34 Nm (300 inch lbs.) effort with Adapter 8581. Secure the transflective reflector sensor into the mounting bracket so that the connector is positioned in front of the transmission and hold it in place with two screws tightened to 3.4 Nm (30 inch lbs.). Check that all sensors work correctly, move the transmission manual shaft lever to PARK, reattach the TRS connector, bring the vehicle to ground level and fill the transmission to the right level.

OEM Dodge Ram 2500 Neutral Safety Switch

Transmission Neutral Safety Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Neutral Safety Switches found

View related parts
Dodge Ram 2500 Neutral Safety Switch Part Number: 56028181AC
Product Specifications
- Other Name: Switch - Neutral, Safety, Back Up
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2002 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Neutral Safety Switch Part Number: 56045489AC
Product Specifications
- Other Name: Switch - Neutral, Safety, Back Up; Switch Neutral Safety, Back Up
- Replaces: 56045489AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2004 Dodge Ram 2500 | Laramie, SLT, ST | 10 Cyl 8.0 L GAS, 5.9L L6, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Neutral Safety Switch Part Number: 3747361AB
Product Specifications
- Other Name: Switch - Neutral Safety, Back Up; Range Sensor; Back-Up Switch
- Replaces: 3747361, P5007747, P5007747AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1999 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 5.2L V8, 5.9L L6, 5.9L V8, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS, 8.0L V10

Dodge Ram 2500 Neutral Safety Switch

Choose OEM Neutral Safety Switch that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Neutral Safety Switch follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 2500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 2500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Ram 2500 is known to be one of the most reliable and premier performing pickup trucks and a significant component that makes this possible is the Neutral Safety Switch. This component is very important and stops the Dodge Ram 2500 from starting if the car is not in either neutral or park hence reducing accident occurrence and safeguarding the transmission. Different versions of Ram 2500 models have had diverse Neutral Safety Switch types to improve and strengthen the vehicle's functions over time. The Neutral Safety Switch in the Dodge Ram 2500 is a very important feature in the vehicle's safety as well as the general efficiency of the vehicle is, and this paper has sought to explain the reasons. The consistency of Ram 2500 models means that this switch will be highly usable by the targeted drivers regardless of the generation. In particular, it is worth noting that the Dodge Ram 2500 has earned fame for its sturdiness and versatility; it thus means that the NSS becomes even more significant in preserving these accomplishments. Descriptions of the Neutral Safety Switch include features of the GERAR and AMS Switch models including solid construction paired with fine workmanship to demonstrate that the Dodge Ram 2500 is an excellent choice for consumers in terms of quality and power of a pickup truck. In conclusion, it is pertinent to note that the Neutral Safety Switch remains an important part of the Dodge Ram 2500 safety standards and definitely a must-have especially for the enthusiastic user.

Dodge Ram 2500 Neutral Safety Switch Parts and Q&A

Neutral Safety Switch
56045489AC
Q: How to Service and Repair the Neutral Safety Switch on Dodge Ram 2500?
A:
To perform any battery desulfation or repair to the Transmission Position Switch/Sensor, first lift the car and install a drain pan below the Transmission Range Sensor (TRS). Shift the manual lever to the LOW position which is closest to you. Unplug the connection at the TRS and then remove both of the screws holding the TRS to the bracket. Pull the TRS completely out of the bracket and use Adapter 8581 to loosen the TRS mounting bracket in the transmission case. Take out the TRS bracket from the transmission case. Turn the transmission manual shaft lever into the manual low setting and install the TRS mounting bracket into the transmission case, applying 34 Nm (300 inch lbs.) effort with Adapter 8581. Secure the transflective reflector sensor into the mounting bracket so that the connector is positioned in front of the transmission and hold it in place with two screws tightened to 3.4 Nm (30 inch lbs.). Check that all sensors work correctly, move the transmission manual shaft lever to PARK, reattach the TRS connector, bring the vehicle to ground level and fill the transmission to the right level.