How to service and repair the front brake caliper on Dodge Ram 2500 Van?

First, support and raise the vehicle so it does not move, then remove the front wheel and tire from the hub. After that, take out the brake hose banjo bolt with its washers and the hose and remove both of the caliper bolts. Lift the caliper up by its bottom so that it comes loose from the adapter and then pull out all the anti-rattle springs, remembering that the springs on the upper and lower plates are not the same. During installation, use a clean cloth to clean the caliper mounting adapter and anti-rattle springs and apply Mopar brake grease or Dow Corning 6807 grease to both the bolts and springs. Put the anti-rattle springs in place, turn the top of the caliper so it sits over the rotor and under the adapter and push the bottom of the caliper onto the adapter. Attach the calipers by placing and tightening the mounting bolts to 33 Nm (24 ft. lbs.). Secure the brake hose to the caliper and use new seal washers throughout. After installation, tighten the fitting banjo bolt to 24 Nm (18 ft. lbs.) so as not to put any kinks or twists into the brake hose. After bleeding the base brake system, set in the wheel and tire assemblies, remove the supports and bring the car down to the ground. Before anything else, check the brakes to be sure you can control the vehicle.

OEM Dodge Ram 2500 Van Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Brake Calipers found

View related parts
Dodge Ram 2500 Van Caliper, Rear Passenger Side Part Number: 5179880AE
$154.61 MSRP: $230.00
You Save: $75.39 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Right; Brake Caliper
- Position: Rear Passenger Side
- Replaces: 5080560AA, 5179880AC, 5179880AB, 5179880AA, 5179880AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Dodge Ram 2500 Van | Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Van Caliper Clip, Rear Driver Side Part Number: 5179881AE
$113.35 MSRP: $169.00
You Save: $55.65 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Left; Brake Caliper Repair Kit; Disc Brake Hardware Kit; Brake Caliper; Caliper
- Position: Rear Driver Side
- Replaces: 5179881AA, 5179881AC, 5179881AB, 5179881AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Dodge Ram 2500 Van | Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Van Caliper, Front Passenger Side Part Number: 5003894AA
$26.72 MSRP: $33.87
You Save: $7.15 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Disc Brake Caliper, Front Right; Caliper Disc Brake; Brake Caliper
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2002 Dodge Ram 2500 Van | Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Van Caliper, Front Driver Side Part Number: 5003895AA
$27.54 MSRP: $34.91
You Save: $7.37 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Disc Brake Caliper, Front Left; Caliper Disc Brake; Brake Caliper
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2002 Dodge Ram 2500 Van | Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Van Caliper, Front Passenger Side Part Number: 5102062AA
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Right; Caliper Disc Brake; Brake Caliper
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Dodge Ram 2500 Van | Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Van Caliper, Front Driver Side Part Number: 5003907AB
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Left; Caliper Disc Brake; Brake Caliper
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2003 Dodge Ram 2500 Van | Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Van Caliper Assembly, Front Driver Side Part Number: R4313391
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Left; Caliper; Housing, Caliper, W/3500 Lb. Front Axle (Cast#4037966-7), Right; Brake Caliper
- Position: Front Driver Side
- Replaces: 4313391
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999 Dodge Ram 2500 Van | Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Van Caliper Assembly, Front Passenger Side Part Number: R4313390
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Right; Caliper; Housing, Caliper, W/3500 Lb. Front Axle (Cast#4037966-7), Right; Brake Caliper
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999 Dodge Ram 2500 Van | Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Van Caliper, Front Passenger Side Part Number: 5003906AB
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Right; Caliper Disc Brake; Brake Caliper
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2003 Dodge Ram 2500 Van | Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS

Dodge Ram 2500 Van Brake Caliper

Choose OEM Brake Caliper that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Brake Caliper follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 2500 Van matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 2500 Van parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Ram 2500 Van Brake Caliper Parts and Q&A

Caliper, Front Driver Side
5003907AB
Q: How to service and repair the front brake caliper on Dodge Ram 2500 Van?
A:
First, support and raise the vehicle so it does not move, then remove the front wheel and tire from the hub. After that, take out the brake hose banjo bolt with its washers and the hose and remove both of the caliper bolts. Lift the caliper up by its bottom so that it comes loose from the adapter and then pull out all the anti-rattle springs, remembering that the springs on the upper and lower plates are not the same. During installation, use a clean cloth to clean the caliper mounting adapter and anti-rattle springs and apply Mopar brake grease or Dow Corning 6807 grease to both the bolts and springs. Put the anti-rattle springs in place, turn the top of the caliper so it sits over the rotor and under the adapter and push the bottom of the caliper onto the adapter. Attach the calipers by placing and tightening the mounting bolts to 33 Nm (24 ft. lbs.). Secure the brake hose to the caliper and use new seal washers throughout. After installation, tighten the fitting banjo bolt to 24 Nm (18 ft. lbs.) so as not to put any kinks or twists into the brake hose. After bleeding the base brake system, set in the wheel and tire assemblies, remove the supports and bring the car down to the ground. Before anything else, check the brakes to be sure you can control the vehicle.