How to Service and Repair a Vapor Canister on Dodge Ram 2500?

When working on the Evaporative Emission Control Canister, you must remove and install two purpose-designed maintenance-free EVAP canisters that sits near the front of the tank. To access a vertically mounted Type 1 canister, first lift the vehicle and, should it be needed, undo the screws and lift off the fuel tank skid plate or transfer case skid plate. Conveniently, the fuel canisters pop out easily once you remove the top bracket and undo the mount nuts. Similar procedures are used for flat-mounted Type 2 canisters and depend on lifting and supporting the vehicle and taking out skid plates first. Disconnect the fuel tubes, remove the bolts from the NVLD filter and its support bracket and then prevent the upper canister and slide out the pins from the rubber grommets of the lower canister. Attach the canisters to the end of the line in the support brackets, then check all lines for damage and securely connect them, as any leaks might show up as a DTC. After installing the lower canister in the body and securing it with nuts, set the upper canister in place, plus the NVLD filter support bracket. Next, add the NVLD filter, check the connections are secure and look for leaks before you re-attach skid plates if you want to.

How to Remove and Install a Vapor Canister on Dodge Ram 2500?

Two EVAP canisters are mounted on a bracket beneath the rear part of the vehicle cab on the outside of its right frame rail. To take out the canisters, cut off their fuel tubes at each canister and remember their location. After that, pry out the mounting nuts at every canister and take each canister off the bracket. To attach each canister, put each canister on its bracket and tighten the nuts to 9 Nm (80 in. lbs.). Now, link the fuel tubes/lines back to every canister.

OEM Dodge Ram 2500 Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Vapor Canisters found

View related parts
Dodge Ram 2500 Vapor Canister Part Number: 5147158AA
$216.31 MSRP: $327.00
You Save: $110.69 (34%)
ADD TO CART
Product Specifications
- Other Name: Canister - Vapor; Filter; Canister; Canister Vapor
- Replaces: 4891567AC, 4891567AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4 | 5.7L V8, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Vapor Canister Part Number: 4891726AI
$412.17 MSRP: $626.00
You Save: $213.83 (35%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Canister - Vapor
- Replaces: 4891726AF, 4891726AH, 4891726AD, 4891726AB, 4891726AG, 4891726AA, 4891726AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Vapor Canister Part Number: 53030837
Product Specifications
- Other Name: Canister - Vapor; Canister, Vacuum; Canister, Vapor; Canister Vapor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2005 Dodge Ram 2500 | Base, Laramie, SLT, ST | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Vapor Canister Part Number: 4891799AA
Product Specifications
- Other Name: Canister - Vapor; Canister Vapor
- Replaces: 4891563AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, Sport, TRX4 | 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Vapor Canister Part Number: 53031584AC
Product Specifications
- Other Name: Canister - Vapor; Canister Fuel Vapor; Canister Vapor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2007 Dodge Ram 2500 | Base, Laramie, Power Wagon, SLT, ST, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Vapor Canister Part Number: 4723550
Product Specifications
- Other Name: Canister Package - Vapor; Canister, Vapor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1995 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Vapor Canister Part Number: 53031752AA
Product Specifications
- Other Name: Canister - Vapor; Canister Vapor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-1997 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

Dodge Ram 2500 Vapor Canister

Choose OEM Vapor Canister that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Vapor Canister follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 2500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 2500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Vapor Canister in Dodge Ram 2500 vehicles is an EVAP canister that is used to control the evaporative emissions or commonly known as the stink pipe with the aim of preventing HC emissions from fleeing to the atmosphere. It works on the basis of a carbon canister which contains activated charcoal that adsorbs the fuel vapors. When the engine is running a purge valve opens and a blend of air and saved fuel vapors is drawn and burnt in the engine. Since then, various versions of Vapor Canister were used on the Ram 2500 of other model years, several of which employed an element that can be replaced in order to ensure its proper working conditions. In the modern models, addition diagnostic features including the canister vent solenoid and the fuel tank pressure sensor work to detect the leakage of fuel and efficient functioning of the model. This evolution is as a result of on-going attempts to reduce the destructive effects on the environment as well as to retain the mobility capability of vehicles.

Dodge Ram 2500 Vapor Canister Parts and Q&A

Vapor Canister
5147158AA
Q: How to Service and Repair a Vapor Canister on Dodge Ram 2500?
A:
When working on the Evaporative Emission Control Canister, you must remove and install two purpose-designed maintenance-free EVAP canisters that sits near the front of the tank. To access a vertically mounted Type 1 canister, first lift the vehicle and, should it be needed, undo the screws and lift off the Fuel Tank skid plate or transfer case skid plate. Conveniently, the fuel canisters pop out easily once you remove the top bracket and undo the mount nuts. Similar procedures are used for flat-mounted Type 2 canisters and depend on lifting and supporting the vehicle and taking out skid plates first. Disconnect the fuel tubes, remove the bolts from the NVLD filter and its support bracket and then prevent the upper canister and slide out the pins from the rubber grommets of the lower canister. Attach the canisters to the end of the line in the support brackets, then check all lines for damage and securely connect them, as any leaks might show up as a DTC. After installing the lower canister in the body and securing it with nuts, set the upper canister in place, plus the NVLD filter support bracket. Next, add the NVLD filter, check the connections are secure and look for leaks before you re-attach skid plates if you want to.
Vapor Canister
53030837
Q: How to Remove and Install a Vapor Canister on Dodge Ram 2500?
A:
Two EVAP canisters are mounted on a bracket beneath the rear part of the vehicle cab on the outside of its right frame rail. To take out the canisters, cut off their fuel tubes at each canister and remember their location. After that, pry out the mounting nuts at every canister and take each canister off the bracket. To attach each canister, put each canister on its bracket and tighten the nuts to 9 Nm (80 in. lbs.). Now, link the fuel tubes/lines back to every canister.