The front air dam is serviced by starting with a C-4755 trim stick or an equivalent tool to clear the fog lamp bezels. After that, take out the screws at the sides of the fog lamp and the three screws in the middle, as well as the two larger screws on each side, to remove the air dam assembly. Attach the air dam to the
Bumper on your car and see to it that the carrot type fasteners fit tightly into their places. Install the middle screws at the center first and afterwards install the screws through the fog lamp opening and the two farthest screws. Once you are finished, put the fog lamp trim bezels back into the bumper and push them firmly into place.