How to Service and Repair an Exhaust Hanger for a 5.9L Diesel on Dodge Ram 3500?

Before fixing or repairing the exhaust pipe and muffler hanger for the 5.9L diesel, you should first take out the negative battery cable and lift the vehicle. Cover the clamp nuts with heat valve lubricant, let it soak in for about five minutes. Free the exhaust tailpipe support hanger isolators, detach the muffler-to-tailpipe clamps and remove the tailpipe from where it is located in the vehicle. Look at all the components, throw out any clamps or supports that are rusty or damaged and use original or similar parts to guarantee proper setup and lower noise from the exhaust. Put the end of the tailpipe into the muffler, then drop the tailpipe hanger rods into the rubber isolators. Slide the clamp on the exhaust, make sure the system is lined up and tighten it to 48 Nm (35 ft. lbs.) torque. Lower the vehicle, link the battery back to its negative terminals and run the engine while examining for exhaust leaks and possible contact points between the exhaust and the rest of the vehicle.

OEM Dodge Ram 3500 Exhaust Hanger

Exhaust Tail Pipe Hanger

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Exhaust Hangers found

View related parts
Dodge Ram 3500 Muffler Insulator, Rear Part Number: 52103718AB
$16.12 MSRP: $24.00
You Save: $7.88 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Exhaust Support; Exhaust System Hanger, Rear; Muffler Hanger Strap; Exhaust Insulator; Exhaust Hanger; Rear Insulator; various exhaust insulators and supports for pipes and mufflers.
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2009 Dodge Ram 3500 | Laramie, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Muffler Insulator, Center Part Number: 52103717AB
$16.12 MSRP: $24.00
You Save: $7.88 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Isolator - Exhaust Support; Exhaust Hanger, Center/Front/Rear; Mount Bushing; Strap; Insulator; Rear Insulator; Multiple use exhaust support for muffler and tailpipe.
- Position: Center
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT, Sport | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Front Pipe Isolator Part Number: 52014091AE
$26.62 MSRP: $39.30
You Save: $12.68 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Exhaust Support; Center Front, Front, Rear Hangers; Exhaust Mount Bushing; Exhaust Insulator.; Converter Isolator; Exhaust Support Muffler Inlet; 3 Hole Mount; Tailpipe Isolator.
- Position: Front
- Replaces: 52014091AC, 52014091AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 3500 | Laramie, SLT, ST | 6 Cyl 6.7 L DIESEL, 6.7L L6
View related parts
Dodge Ram 3500 Front Pipe Bracket Part Number: 52121889AB
$41.90 MSRP: $61.55
You Save: $19.65 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Exhaust; Exhaust System Hanger Bracket; Exhaust Hanger; Bracket Exhaust Manifold Pipe
- Replaces: 52121889AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Ram 3500 | Laramie, SLT, ST, SXT, Sport | 6 Cyl 6.7 L DIESEL, 6.7L L6
View related parts
Dodge Ram 3500 Exhaust Pipe Bracket Part Number: 52103595AB
Product Specifications
- Other Name: Bracket - Exhaust; Exhaust System Hanger; Exhaust Bracket; Exhaust Hanger; Bracket; Bracket Exhaust Manifold Pipe; Bracket Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2008 Dodge Ram 3500 | Laramie, SLT, ST, Sport, TRX4 | 6 Cyl 5.9 L DIESEL

Dodge Ram 3500 Exhaust Hanger

Choose OEM Exhaust Hanger that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Exhaust Hanger follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 3500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 3500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Exhaust Hanger for the Dodge Ram 3500 is a crucial part that symbolises the strength and power of the Dodge Ram 3500 series. Intended for the reinforcement and anchoring of the exhaust system, this Exhaust Hanger shields the exhaust system from the links of other automotive parts, keeping the cabin shielded from noise and vibrations. Constructed from high quality rubber the Exhaust Hanger is built to endure serious work and remain strong indefinitely. Therefore, it is important to inspect and maintain the Exhaust Hanger's condition because if it deteriorates and wears out, loud exhaustion sound and stress on exhaust system of the Dodge Ram 3500 is created; thereby reducing its efficiency and safety. This particular Exhaust Hanger can fit different models of the Dodge Ram 3500, therefore making it ideal to be used in the truck to boost its performance. Moreover, the Dodge Ram 3500 has a full-floating axle; along with the Exhaust Hanger, they ensure better stability and smoothness. Dodge Ram 3500 Exhaust Hanger is among the most fascinating automotive parts in the market because it absorbs vibrations originating from the engine and guarantees that the exhaust parts will stay in the right place. Overall, a high-quality Exhaust Hanger can be considered as an addition that will not only suppress noise and vibration in the Dodge Ram 3500 cabin, but also prolong the life of the other components, which is quite expected from the company that is a leader in the segment of full-size pickup trucks.

Dodge Ram 3500 Exhaust Hanger Parts and Q&A

Muffler Insulator, Center
52103717AB
Q: How to Service and Repair an Exhaust Hanger for a 5.9L Diesel on Dodge Ram 3500?
A:
Before fixing or repairing the Exhaust Pipe and muffler hanger for the 5.9L diesel, you should first take out the negative Battery Cable and lift the vehicle. Cover the clamp nuts with heat valve lubricant, let it soak in for about five minutes. Free the exhaust tailpipe support hanger isolators, detach the muffler-to-tailpipe clamps and remove the tailpipe from where it is located in the vehicle. Look at all the components, throw out any clamps or supports that are rusty or damaged and use original or similar parts to guarantee proper setup and lower noise from the exhaust. Put the end of the tailpipe into the muffler, then drop the tailpipe hanger rods into the rubber isolators. Slide the clamp on the exhaust, make sure the system is lined up and tighten it to 48 Nm (35 ft. lbs.) torque. Lower the vehicle, link the battery back to its negative terminals and run the engine while examining for exhaust leaks and possible contact points between the exhaust and the rest of the vehicle.