How Is a Catalytic Converter Installed on a 5.7L Engine on Dodge Ram 3500?

At the outset, secure the converter to the clamp on the catalytic converter and next put it into the exhaust pipe. Ensure that the tang part of the catalytic converter is all the way into the notch on the exhaust pipe. After that, bolt and tighten the catalytic converter to the exhaust manifold with all bolts at 31 Nm (23 ft. lbs.) and all clamp nuts at 52 Nm (40 ft. lbs.). After installing the exhaust, check that everything is clear of the body by 25 mm (1.0 in.) and change positions when needed. After finishing, start the engine, drive the vehicle and deal with any leaks from the exhaust system.

How to Service and Repair a Catalytic Converter on a 5.7L Engine on Dodge Ram 3500?

It is important to raise and support your 5.7L vehicle before you start servicing or repairing the catalytic converter. Apply a coating of heat valve lubricant to all bolts and nuts and let them sit for 5 minutes. Take the oxygen sensor electrical connectors off, then untighten the clamps and nuts. Following this, remove the bolts and nut holding the catalytic converter to the exhaust manifold and then get out the entire assembly.

OEM Dodge Ram 3500 Catalytic Converter

Cat. Converter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

25 Catalytic Converters found

View related parts
Dodge Ram 3500 Converter - Diesel Particulate Part Number: 68035061AB
$2913.08 MSRP: $4225.00
You Save: $1311.92 (32%)
ADD TO CART
Product Specifications
- Other Name: CONVERTER-DIESEL PARTICULATE
- Replaces: 68035061AA, 52122419AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Ram 3500 | Laramie, SLT, ST | 6 Cyl 6.7 L DIESEL, 6.7L L6
View related parts
Dodge Ram 3500 Catalytic Converter, Center Part Number: 68035059AC
$2019.98 MSRP: $2925.00
You Save: $905.02 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Catalytic; Catalytic Converter, Center
- Position: Center
- Replaces: 68035059AB, 68035059AA, 52122196AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Ram 3500 | Laramie, SLT, ST, SXT, Sport | 6 Cyl 6.7 L DIESEL, 6.7L L6
View related parts
Dodge Ram 3500 Catalytic Converter, Rear Part Number: 68035060AC
$2489.43 MSRP: $3610.00
You Save: $1120.57 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Diesel Particulate; Catalytic Converter, Rear
- Position: Rear
- Replaces: 68035060AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Ram 3500 | Laramie, SLT, ST, SXT, Sport | 6 Cyl 6.7 L DIESEL
View related parts
Dodge Ram 3500 Catalytic Converter, Center Part Number: 52122196AD
$4333.13 MSRP: $7770.00
You Save: $3436.87 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Catalytic; Catalytic Converter, Center
- Position: Center
- Replaces: 52122196AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 3500 | Laramie, SLT, ST | 6 Cyl 6.7 L DIESEL, 6.7L L6
View related parts
Dodge Ram 3500 Catalytic Converter, Front Part Number: 52121426AH
$3502.18 MSRP: $5095.00
You Save: $1592.82 (32%)
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust Front; Exhaust Pipe; Front Pipe
- Position: Front
- Replaces: 52121426AG, 52121426AD, 52121426AE, 52121426AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 3500 | Laramie, SLT, ST | 6 Cyl 6.7 L DIESEL, 6.7L L6
View related parts
Dodge Ram 3500 Catalytic Converter Part Number: 52121210AB
Product Specifications
- Other Name: Converter - Catalytic; Exhaust Pipe; Converter & Pipe; Converter Catalytic
- Replaces: 52121210AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Dodge Ram 3500 | Laramie, SLT, ST, Sport, TRX4 | 5.9L L6, 6 Cyl 5.9 L DIESEL
View related parts
Dodge Ram 3500 Catalytic Converter Part Number: 52018191
Product Specifications
- Other Name: Converter Catalytic; Exhaust Pipe; Converter & Pipe; Pipe, Exhaust Extension
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1999 Dodge Ram 3500 | Base | 6 Cyl 5.9 L DIESEL
View related parts
Dodge Ram 3500 Catalytic Converter Part Number: 5019145AC
Product Specifications
- Other Name: Converter - Catalytic; Exhaust Pipe; Converter & Pipe
- Replaces: 5019145AA, 5019145AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-1997 Dodge Ram 3500 | Base | 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Catalytic Converter Part Number: 5019146AC
Product Specifications
- Other Name: Converter - Catalytic; Exhaust Pipe; Converter & Pipe
- Replaces: 5019146AA, 5019146AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-1997 Dodge Ram 3500 | Base | 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Catalytic Converter Part Number: 5018795AC
Product Specifications
- Other Name: Converter - Catalytic; Exhaust Pipe; Converter & Pipe
- Replaces: 5018795AB, 52103225AD, 5018795AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-1999 Dodge Ram 3500 | Base | 5.9L V8, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Catalytic Converter Part Number: 5018800AB
Product Specifications
- Other Name: Converter - Catalytic; Muffler; Converter Catalytic
- Replaces: 5018800AA, 52103220AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2000 Dodge Ram 3500 | Base | 5.9L V8, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Catalytic Converter Part Number: 5019150AB
Product Specifications
- Other Name: Converter - Catalytic; Converter Catalytic
- Replaces: 52018122, 5019150AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1997 Dodge Ram 3500 | Base | 5.9L V8, 8 Cyl 5.9 L GAS, 8.0L V10
View related parts
Dodge Ram 3500 Catalytic Converter Part Number: 52103078AJ
Product Specifications
- Other Name: Converter - Catalytic; Converter; Converter Catalytic
- Replaces: 52103078AG, 52103078AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2002 Dodge Ram 3500 | 5.9L V8, 8.0L V10
- 1994-1997 Dodge Ram 3500
View related parts
Dodge Ram 3500 Catalytic Converter Part Number: 5018794AC
Product Specifications
- Other Name: Converter - Catalytic; Exhaust Pipe; Converter & Pipe
- Replaces: 5018794AA, 5018794AB, 52103225AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-1999 Dodge Ram 3500 | Base | 5.9L V8, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Catalytic Converter Part Number: 52103345AD
Product Specifications
- Other Name: Converter - Catalytic; Exhaust Pipe; Converter & Pipe
- Replaces: 52103345AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2002 Dodge Ram 3500 | Base | 5.9L V8, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Catalytic Converter Part Number: 52121765AB
Product Specifications
- Other Name: Converter - Exhaust; Exhaust Pipe; Converter & Pipe; Pipe And Converter Exhaust
- Replaces: 52121765AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Dodge Ram 3500 | Laramie, SLT, ST, Sport | 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Catalytic Converter Part Number: 52121094AB
Product Specifications
- Other Name: Converter - Catalytic; Exhaust Pipe; Converter; Converter Catalytic
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Dodge Ram 3500 | Laramie, SLT, ST | 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Catalytic Converter Part Number: 5018796AC
Product Specifications
- Other Name: Converter - Catalytic; Exhaust Pipe; Converter & Pipe
- Replaces: 5018796AA, 5018796AB, 52103224AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-1999 Dodge Ram 3500 | Base | 5.9L V8, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Catalytic Converter Part Number: 52121291AA
Product Specifications
- Other Name: Converter - Exhaust; Exhaust Pipe; Converter & Pipe; Pipe And Converter Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2005 Dodge Ram 3500 | Laramie, SLT, ST | 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Converter & Pipe Part Number: 52103344AE
Product Specifications
- Other Name: Converter - Catalytic; Catalytic Converter; Exhaust Pipe; Converter Catalytic
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Dodge Ram 3500 | Base | 8 Cyl 5.9 L GAS

| Page 1 of 2 |Next >

1-20 of 25 Results

Dodge Ram 3500 Catalytic Converter

Choose OEM Catalytic Converter that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Catalytic Converter follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 3500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 3500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Catalytic Converter that is installed in Dodge Ram 3500 vehicles has a that main function of working within the exhaust system with the goal of cutting down toxic gases which are released during the combustion process. Carbon Monoxide (CO), Hydrocarbons (HC), and Oxides of Nitrogen (NOx) are some of the pollutants that undergo chemical reaction by contact with the catalyst, mainly platinum, palladium, and rhodium, into water and Carbon Dioxide (CO2). Through the years, Dodge Ram 3500 has had it with various designs of the Catalytic Converters, with the two-way and three-way systems with the three-way systems becoming familiarized by 1981. The three-way converters oxidize CO and HC apart from the reduction of NOx emissions as shown above. There are also Performance-oriented Catalytic Converters for objectives of high flow to improve engine capabilities, although the necessary catalytic efficiency is also needed. These converters can be direct fit or universal but if the direct fit converters are chosen they are bolted into place and ensure the optimal performance for the Dodge Ram 3500.

Dodge Ram 3500 Catalytic Converter Parts and Q&A

Catalytic Converter, Rear
68035060AC
Q: How Is a Catalytic Converter Installed on a 5.7L Engine on Dodge Ram 3500?
A:
At the outset, secure the converter to the clamp on the catalytic converter and next put it into the Exhaust Pipe. Ensure that the tang part of the catalytic converter is all the way into the notch on the exhaust pipe. After that, bolt and tighten the catalytic converter to the Exhaust Manifold with all bolts at 31 Nm (23 ft. lbs.) and all clamp nuts at 52 Nm (40 ft. lbs.). After installing the exhaust, check that everything is clear of the body by 25 mm (1.0 in.) and change positions when needed. After finishing, start the engine, drive the vehicle and deal with any leaks from the exhaust system.
Catalytic Converter, Center
68035059AC
Q: How to Service and Repair a Catalytic Converter on a 5.7L Engine on Dodge Ram 3500?
A:
It is important to raise and support your 5.7L vehicle before you start servicing or repairing the catalytic converter. Apply a coating of heat valve lubricant to all bolts and nuts and let them sit for 5 minutes. Take the Oxygen Sensor electrical connectors off, then untighten the clamps and nuts. Following this, remove the bolts and nut holding the catalytic converter to the Exhaust Manifold and then get out the entire assembly.