How to Install a Driveshaft Center Support Bearing on the Propeller Shaft on Dodge Sprinter 2500?

With protective caps and washer, press the driveshaft center support bearing (2) onto the propeller shaft using Installer 9275 (1). For a round flange on the driveshaft center support bearing, add a new bolt at its middle and tighten it until it reaches 95 Nm (70 ft. lbs.). After that, put on the snap-ring and apply universal grease to the spline on the propeller shaft. Put the rubber boot on the propeller shaft and press the shaft to make certain the markings line up for correct placing. Make certain the rubber seal is in place and put in the new collar clamps, then insert the propeller shaft.

How to Service and Repair a Driveshaft Center Support Bearing on Dodge Sprinter 2500?

You should start by pulling out the propeller shaft and use marks to ensure the shafts are lined up for assembly. Release both of the collar clamps and separate the propeller shaft. Take out the snap-ring. If the driveshaft center support bearing looks like a doughnut, remove the bolt that is in the center of the flange. Place a Bridge 938 and 1130 Bearing Splitter with a plug on it behind the thrust washer of the bearing, then carefully remove the driveshaft center support bearing.

OEM Dodge Sprinter 2500 Driveshaft Center Support Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Driveshaft Center Support Bearings found

View related parts
Dodge Sprinter 2500 Center Bearing Part Number: 68031836AA
$148.42 MSRP: $175.00
You Save: $26.58 (16%)
Product Specifications
- Other Name: Bearing - Drive Shaft; Drive Shaft Center Support Bearing; Driveshaft Center Support Bearing; Center Bearing Drive Shaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 2500 Center Bearing Part Number: 5104574AA
Product Specifications
- Other Name: Bearing - Drive Shaft; Drive Shaft Center Support Bearing; Driveshaft Center Support Bearing; Center Support Bearing; Center Bearing Drive Shaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Sprinter 2500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Center Bearing Part Number: 68031835AA
Product Specifications
- Other Name: Bearing - Drive Shaft; Driveshaft Center Support Bearing
- Replaces: 68006649AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS

Dodge Sprinter 2500 Driveshaft Center Support Bearing

Choose OEM Driveshaft Center Support Bearing that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Driveshaft Center Support Bearing follows strict manufacturing steps to lock in quality and fit. If your Dodge Sprinter 2500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sprinter 2500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Sprinter 2500 Driveshaft Center Support Bearing Parts and Q&A

Center Bearing
68031836AA
Q: How to Install a Driveshaft Center Support Bearing on the Propeller Shaft on Dodge Sprinter 2500?
A:
With protective caps and washer, press the driveshaft center support bearing (2) onto the propeller shaft using Installer 9275 (1). For a round flange on the driveshaft center support bearing, add a new bolt at its middle and tighten it until it reaches 95 Nm (70 ft. lbs.). After that, put on the snap-ring and apply universal grease to the spline on the propeller shaft. Put the rubber boot on the propeller shaft and press the shaft to make certain the markings line up for correct placing. Make certain the rubber seal is in place and put in the new collar clamps, then insert the propeller shaft.
Center Bearing
68031835AA
Q: How to Service and Repair a Driveshaft Center Support Bearing on Dodge Sprinter 2500?
A:
You should start by pulling out the propeller shaft and use marks to ensure the shafts are lined up for assembly. Release both of the collar clamps and separate the propeller shaft. Take out the snap-ring. If the driveshaft center support bearing looks like a doughnut, remove the bolt that is in the center of the flange. Place a Bridge 938 and 1130 Bearing Splitter with a plug on it behind the thrust washer of the bearing, then carefully remove the driveshaft center support bearing.