How to Properly Bleed a Brake Master Cylinder Before Installation on Dodge Sprinter 3500?

For a successful bleed of the brake master cylinder before mounting it, make sure your tools include two bleed tubes and a dowel to operate the piston; bleed tubes can be made from brake line. Squeeze the brake master cylinder together in a vise and fit the bleed hose ends into the reservoir after attaching them to the cylinder's bleed ports. Fill the reservoir with fresh brake fluid then use the wood dowel to push the cylinder pistons in. Roll back the pistons, allowing the spring to bring them back, not stopping until you cannot see any bubbles left in the liquid.

How to Remove the Brake Master Cylinder on Dodge Sprinter 3500?

First, try to remove as much brake fluid from the reservoir, using a suction gun (2). If you have a detachable clutch feed tube, do that and release the wires connected to the brake level switch (4). Take out the brake lines (5) and close off both ends and the holes in the brake lines by fitting them with plugs. After that, unscrew the brake master cylinder mounting nuts (8) and look for any harm to the brake booster, produced by a leaking brake master cylinder, because the brake master cylinder cannot be fixed. At the end, remove the brake master cylinder (9) and, should you replace the brake master cylinder, take out the fluid reservoir and grommets (7).

OEM Dodge Sprinter 3500 Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Master Cylinders found

View related parts
Dodge Sprinter 3500 Master Cylinder Part Number: 5119355AA
$265.08 MSRP: $336.03
You Save: $70.95 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Master Cylinder - Brake Master; Brake Master Cylinder; Cylinder Brake Master
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Sprinter 3500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 3500 Master Cylinder Reservoir Part Number: 5119356AA
Product Specifications
- Other Name: Master Cylinder - Brake Master Cylinder; Brake Master Cylinder Reservoir; Reservoir; Reservoir Brake Master Cylinder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Sprinter 3500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 3500 Master Cylinder Part Number: 5119354AA
Product Specifications
- Other Name: Master Cylinder - Brake Master; Brake Master Cylinder; Cylinder Brake Master
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Sprinter 3500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 3500 Master Cylinder Part Number: 68005054AC
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder
- Replaces: 68005054AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 3500 | Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS

Dodge Sprinter 3500 Brake Master Cylinder

Choose OEM Brake Master Cylinder that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Brake Master Cylinder follows strict manufacturing steps to lock in quality and fit. If your Dodge Sprinter 3500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sprinter 3500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Holding a central position in the working of the Dodge Sprinter 3500, the Dodge Sprinter 3500 Brake Master Cylinder is an important part that establishes the series credibility in the automotive industry. This particular Brake Master Cylinder is used to translate the foot force exerted on it and translate this to hydraulic pressure necessary to regulate the slave cylinders of the car's brake system. Thanks to this, the construction of the Dodge Sprinter 3500 is quite massive, which makes it possible to provide the cars with the best braking that increases safety and productivity. Describing the technical details of this Brake Master Cylinder for the Dodge Sprinter 3500, which is compatible with the models made between 2003 and 2009, it is necessary to note the diagonally split hydraulic system, which provides the car brakes' safe functioning even in the case of failure. This design does not only add on the reliability of the Dodge Sprinter 3500 but also makes it very capable of handling performance driven situations. The Brake Master Cylinder should be maintained from time to time because spills and rust detract from braking ability. The Dodge Sprinter 3500 model boasts a fuel efficiency of about 25 mpg and has a towing capability of up to 5000 pounds; therefore, widely suitable to small business owners and those individuals who desire personal use. Also, by the applied force from the Brake Master Cylinder to act on either the calipers or the drum brakes, the efficiency of the car increases. The Dodge sprinter 3500 brake master cylinder is one of the best inventions in the automobile industry because it provides durability, performance, and safety features.Consequently, the Dodge sprinter 3500 continues to deliver optimum results among drivers who seek a vehicle of high performance.

Dodge Sprinter 3500 Brake Master Cylinder Parts and Q&A

Master Cylinder
5119355AA
Q: How to Properly Bleed a Brake Master Cylinder Before Installation on Dodge Sprinter 3500?
A:
For a successful bleed of the brake master cylinder before mounting it, make sure your tools include two bleed tubes and a dowel to operate the Piston; bleed tubes can be made from Brake Line. Squeeze the brake master cylinder together in a vise and fit the bleed hose ends into the reservoir after attaching them to the cylinder's bleed ports. Fill the reservoir with fresh brake fluid then use the wood dowel to push the cylinder pistons in. Roll back the pistons, allowing the spring to bring them back, not stopping until you cannot see any bubbles left in the liquid.
Master Cylinder
68005054AC
Q: How to Remove the Brake Master Cylinder on Dodge Sprinter 3500?
A:
First, try to remove as much brake fluid from the reservoir, using a suction gun (2). If you have a detachable clutch feed tube, do that and release the wires connected to the brake level switch (4). Take out the Brake Lines (5) and close off both ends and the holes in the brake lines by fitting them with plugs. After that, unscrew the brake master cylinder mounting nuts (8) and look for any harm to the Brake Booster, produced by a leaking brake master cylinder, because the brake master cylinder cannot be fixed. At the end, remove the brake master cylinder (9) and, should you replace the brake master cylinder, take out the fluid reservoir and grommets (7).