How to Service a Coolant Temperature Sensor on Dodge Stratus?

First, check that the engine is cool and then partially drain the cooling system below the position of the ECT sensor. After that, remove the ECT sensor electrical connector and take out the ECT sensor. To install the ECT sensor, place it in the right position, apply 19 Nm (168 in. lbs.) of torque and link the ECT sensor electrical connector. The next step is to finish by putting water in the cooling system.

How to Locate, Remove, and Install a Coolant Temperature Sensor on Dodge Stratus?

You will find the Engine Coolant Temperature sensor just behind the cylinder head. The first thing to do is disconnect the negative battery cable. Drain the coolant after turning off the engine so that the level sits under the sensor when cold. Following that, remove the electrical connector from the coolant sensor and take out the sensor. To install the sensor, secure the sensor properly and tighten to 14 ± 2 ft lb (19 ± 2 Nm). Now that you're done with repairs, first connect the wires to the sensor, then top up the coolant reservoir and complete with the negative battery cable.

OEM Dodge Stratus Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Coolant Temperature Sensors found

View related parts
Dodge Stratus Coolant Temperature Sensor Part Number: 56027873
$90.13 MSRP: $125.00
You Save: $34.87 (28%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Coolant Temperature; Engine Coolant Temperature Sensor; Cooling Fan Temperature Switch; Temperature Sensor; Fan Switch; Temperature Coolant Sensor; Temperature Sending Unit; Sensor Coolant Temperature
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2000 Dodge Stratus | Base, ES, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Dodge Stratus Coolant Temperature Sensor Part Number: 33004281
$42.24 MSRP: $62.00
You Save: $19.76 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Coolant Temperature; Engine Coolant Temperature Sensor; Cooling Fan Temperature Switch; Fan Switch; Coolant Temperature Sensor; Engine Coolant Temperature; 1994-95.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1996 Dodge Stratus | Base, ES | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Dodge Stratus Coolant Temperature Sensor Part Number: MD177572
$32.07 MSRP: $45.20
You Save: $13.13 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Coolant Temperature; Engine Coolant Temperature Sensor; Cooling Fan Temperature Switch; Temperature Sensor; Fan Switch; Water Temperature Sensor; Coolant Temperature Sensor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Dodge Stratus | R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Dodge Stratus Coolant Temperature Sensor Part Number: 5269870AB
$63.79 MSRP: $86.70
You Save: $22.91 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Coolant Temperature; Engine Coolant Temperature Sensor; Sender Unit, Coolant Temperature; Temperature Sensor; Temperature Coolant Sensor; Temperature Sending Unit; Sensor Coolant Temperature
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Dodge Stratus | ES, R/T, SE, SE Plus, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS

Dodge Stratus Coolant Temperature Sensor

Choose OEM Coolant Temperature Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Coolant Temperature Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Stratus matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Stratus parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Stratus Coolant Temperature Sensor is a highly important part that greatly improves the efficiency of Dodge Stratus models. This sensor always measures the temperature of the cool which is important as it helps to regulate the engine temperature for efficiency and to avoid cases where the engine is likely to over heat. Designed for the Dodge Stratus, this Coolant Temperature Sensor is suitable for the models manufactured between 1995 and 2005 for the effective controlling of the temperature at which the car operates, which is an important factor in determining the car's safety and durability. Still, on the engine side, the Dodge Stratus is endowed with splendid engine types that include the 2.4 L and 2.7 L V6 engines that come with commendable power capacity. The Coolant Temperature Sensor makes these engines operate at their prime by feeding the temperature information to the engine control unit for the required changes. This feature improves the fuel economy further and reduces exhaust emissions; therefore, the Dodge Stratus comes out as a more conducive automobile to the environment. Also, there will be a benefit of the Dodge Stratus Coolant Temperature Sensor whose production is made with high standards of durability and accuracy in the automotive market. It is very reliable due to its performance as is testified by Dodge users who highly recommend the product. In conclusion, the Dodge Stratus Coolant Temperature Sensor is a very important component that points to the car's dedication to performance, protection, and economy and hence the affection most drivers hold for it.

Dodge Stratus Coolant Temperature Sensor Parts and Q&A

Coolant Temperature Sensor
MD177572
Q: How to Service a Coolant Temperature Sensor on Dodge Stratus?
A:
First, check that the engine is cool and then partially drain the cooling system below the position of the ECT sensor. After that, remove the ECT sensor electrical connector and take out the ECT sensor. To install the ECT sensor, place it in the right position, apply 19 Nm (168 in. lbs.) of torque and link the ECT sensor electrical connector. The next step is to finish by putting water in the cooling system.
Coolant Temperature Sensor
56027873
Q: How to Locate, Remove, and Install a Coolant Temperature Sensor on Dodge Stratus?
A:
You will find the Engine Coolant Temperature sensor just behind the cylinder head. The first thing to do is disconnect the negative Battery Cable. Drain the coolant after turning off the engine so that the level sits under the sensor when cold. Following that, remove the electrical connector from the coolant sensor and take out the sensor. To install the sensor, secure the sensor properly and tighten to 14 ± 2 ft lb (19 ± 2 Nm). Now that you're done with repairs, first connect the wires to the sensor, then top up the coolant reservoir and complete with the negative battery cable.