How to Replace a Camshaft Position Sensor on Dodge Stratus?

It is fitted at the back of the cylinder head where it plays its role. The first step is to get rid of the negative battery cable and disconnect the PCV hose, since you may need to reposition it. Then, take out the screws that secure the camshaft position sensor and separate the connectors from the sensor. To remove the target magnet, first loosen the screw securing it on the camshaft and then take out the magnet. Put the new target magnet in place by aligning its holes with the locating dowels at the camshaft's end, tighten the screw securely, but not too much to prevent cracking and replace the magnet if it cracks. Position the camshaft position sensor and fix it with the mounting screws to a torque of 12.9 Nm (115 in. lbs.). Make sure that the electrical connector is attached straight to the camshaft position sensor so the sensor pins are not damaged. After that, put the PCV Valve hose back in and reattach the negative battery cable.

How to Remove and Install a Camshaft Position Sensor on Dodge Stratus?

The sensor needs to have its connector pulled out before the screw is removed from the camshaft position sensor in the head. When the screw is out, the sensor can be easily removed from the chain case cover, without pulling on the connector. Place the sensor inside the chain case cover again and push until it touches the boss on the head. While keeping the bolt in this position, tighten it to 12 Nm (105 in. lbs.), then fix the electrical connector to the sensor.

OEM Dodge Stratus Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Camshaft Position Sensors found

View related parts
Dodge Stratus Camshaft Position Sensor Part Number: 5096057AA
$60.57 MSRP: $132.00
You Save: $71.43 (55%)
ADD TO CART
Product Specifications
- Other Name: Sensor Packkage - Camshaft; Sensor Package Camshaft
- Replaces: 4882850AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2000 Dodge Stratus | Base, SE | 2.0L L4, 4 Cyl 2.0 L GAS
View related parts
Dodge Stratus Camshaft Position Sensor Part Number: 68407872AA
$92.96 MSRP: $137.00
You Save: $44.04 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Crankshaft Position; Engine Camshaft Position Sensor; Camshaft Sensor.
- Replaces: 4609089AH, 4609089AF, 4609089AI, 4609089AG, 4609089AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Dodge Stratus | ES, R/T, SE, SE Plus, SXT | 2.7L V6, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Dodge Stratus Camshaft Position Sensor Part Number: 5093508AA
Product Specifications
- Other Name: Sensor Packkage - Camshaft; Engine Camshaft Position Sensor; Camshaft Sensor; Sensor Package Camshaft
- Replaces: 4882851AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2006 Dodge Stratus | Base, ES, SE, SE Plus, SXT | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Stratus Ignition Coil Part Number: 5269705AB
Product Specifications
- Other Name: Sensor - Camshaft; Engine Camshaft Position Sensor; Camshaft Position Sensor; Cam Sensor; Crankshaft Position Sensor; Sensor Camshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Dodge Stratus | ES, SE, SE Plus | 4 Cyl 2.4 L GAS
View related parts
Dodge Stratus Camshaft Position Sensor Part Number: MD327107
Product Specifications
- Other Name: Sensor - Camshaft; Engine Camshaft Position Sensor; Camshaft Sensor; Sensor Camshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Dodge Stratus | SE, SXT | 4 Cyl 2.4 L GAS

Dodge Stratus Camshaft Position Sensor

Choose OEM Camshaft Position Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Camshaft Position Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Stratus matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Stratus parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Stratus Camshaft Position Sensor is a part that has a huge impact on improving the credibility and efficiency of Dodge Stratus models. This sensor is fine-tuned to detecting the position and speed of the camshaft and sends useful information to the ECM regarding the fuel injection and the ignition timing. Despite this, its position is fixed above the camshaft and differs depending on the specific model, thus allowing the Dodge Stratus made between 1995 and 2005 to adopt the mentioned valve size. The Dodge Stratus Camshaft Position Sensor is usually coupled with the crank sensor to order and integrate most of the parts in the engine in terms of the performance and safety. The Camshaft Position Sensor, if it is not working correctly, reduces the engine's efficiency, and thus a reminder of the need for constant checks. The Dodge Stratus is renowned for its powerful ranging from its perfect 2.4 L to the mighty 2.7 L V6 power train engine; more feasible and extraordinary horsepower and torque produced; the exact functioning of the Camshaft Position Sensor. Ratings for fuel consumption in the internal city streets range between 20 and 21 miles per gallon while in the highways, it offers between 26 to 29 miles in a gallon and this makes is to be on the list for sale among contenders of good budget performance cars. Most significant, it is for this reason that the Dodge Stratus Camshaft Position Sensor is one of the best when it comes to durability and reliability in the market. It consequently becomes an essential component in the process of running an efficient and safe engine which contributes to the reputation for religious quality and reliability that the Dodge Stratus is famed for.

Dodge Stratus Camshaft Position Sensor Parts and Q&A

Camshaft Position Sensor
68407872AA
Q: How to Replace a Camshaft Position Sensor on Dodge Stratus?
A:
It is fitted at the back of the cylinder head where it plays its role. The first step is to get rid of the negative Battery Cable and disconnect the PCV hose, since you may need to reposition it. Then, take out the screws that secure the Camshaft position sensor and separate the connectors from the sensor. To remove the target magnet, first loosen the screw securing it on the camshaft and then take out the magnet. Put the new target magnet in place by aligning its holes with the locating dowels at the camshaft's end, tighten the screw securely, but not too much to prevent cracking and replace the magnet if it cracks. Position the camshaft position sensor and fix it with the mounting screws to a torque of 12.9 Nm (115 in. lbs.). Make sure that the electrical connector is attached straight to the camshaft position sensor so the sensor pins are not damaged. After that, put the PCV Valve hose back in and reattach the negative battery cable.
Ignition Coil
5269705AB
Q: How to Remove and Install a Camshaft Position Sensor on Dodge Stratus?
A:
The sensor needs to have its connector pulled out before the screw is removed from the camshaft position sensor in the head. When the screw is out, the sensor can be easily removed from the chain case cover, without pulling on the connector. Place the sensor inside the chain case cover again and push until it touches the boss on the head. While keeping the bolt in this position, tighten it to 12 Nm (105 in. lbs.), then fix the electrical connector to the sensor.