How to Diagnose and Fix a Throttle Position Sensor on Dodge Stratus?

Before starting the service or repair of the Throttle Position Sensor, you must remove the negative battery cable and the sensor electrical connector. Unscrew the two bolts that keep the throttle position sensor fastened and remove the sensor. When placing the throttle body during installation, slide the throttle shaft end into the part of the TPS that has two tabs and ensure the shaft touches those two tabs. If the TPS is correctly indexed, turning it slightly clockwise brings its mounting screw holes to match those in the throttle body and there is slight tension felt during rotation. If rotation is hard, turn the sensor around to place the throttle shaft away from the tabs. Secure the mounting screws to 5.1 N.m (45 in. lbs.). After fitting the sensor, make sure the throttle plate is shut; if it is not, install the sensor on the side with the tabs. Then, fix the electrical connector to the TPS and put back the negative battery cable in its position.

How to Service and Repair a Throttle Position Sensor on Dodge Stratus?

Before servicing or repairing the Throttle Position Sensor, lower the negative battery cable and the throttle body from the engine. After that, take out the screws holding the TPS mount, then take off the TPS. The throttle shaft should go straight into the TPS socket, with its end fitted against the socket's two internal tabs during installation. A properly indexed TPS will turn to the right a little, so the screw holes of the throttle plate are lined up with the holes in the throttle body. Replace the axis of rotation by putting the sensor with the throttle perpendicular to the guide pins. Turn the mounting screws to a torque of 5.1 Nm (45 in. lbs.). After fitting the TPS, verify that the throttle plate is closed; if it's open, adjust the sensor in the right location. After that, install the throttle body back and reattach the negative battery cable.

OEM Dodge Stratus Throttle Position Sensor

TPS Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Throttle Position Sensors found

View related parts
Dodge Stratus Throttle Position Sensor Part Number: 68405581AA
$88.80 MSRP: $196.00
You Save: $107.20 (55%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Throttle Position; Throttle Positionition Sensor
- Replaces: 4606397AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Dodge Stratus | ES, SE, SE Plus, SXT | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Stratus Throttle Position Sensor Part Number: MD628077
$157.59 MSRP: $344.00
You Save: $186.41 (55%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Throttle Position; Sensor Throttle Position
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Dodge Stratus | R/T, SE | 6 Cyl 3.0 L GAS
View related parts
Dodge Stratus Throttle Position Sensor Part Number: 4874430AB
$97.70 MSRP: $129.00
You Save: $31.30 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Kit - Throttle Position; Throttle Sensor; Sensor Kit Throttle Position
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2000 Dodge Stratus | Base, SE | 4 Cyl 2.0 L GAS
View related parts
Dodge Stratus Throttle Position Sensor Part Number: 68405577AA
$152.76 MSRP: $231.00
You Save: $78.24 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Throttle Position; Throttle Positionition Sensor; Throttle Sensor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2000 Dodge Stratus | Base, ES, SE | 4 Cyl 2.4 L GAS
View related parts
Dodge Stratus Throttle Position Sensor Part Number: 4897247AA
$79.83 MSRP: $101.20
You Save: $21.37 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Throttle Position; Throttle Positionition Sensor; Idle Control Motor; Idle Speed Control; Sensor Kit Throttle Position
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Dodge Stratus | ES, R/T, SE, SE Plus, SXT | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Dodge Stratus Throttle Position Sensor Part Number: 4605130
$84.15 MSRP: $106.67
You Save: $22.52 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Throttle Position; Throttle Positionition Sensor; Sensor, Throttle Position; Body, Throttle
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1997 Dodge Stratus | Base, ES | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Dodge Stratus Throttle Position Sensor Part Number: 68405576AA
Product Specifications
- Other Name: Sensor - Throttle Position; Throttle Positionition Sensor
- Replaces: 4606197
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2000 Dodge Stratus | ES | 2.5L V6, 6 Cyl 2.5 L GAS

Dodge Stratus Throttle Position Sensor

Choose OEM Throttle Position Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Throttle Position Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Stratus matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Stratus parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Stratus Throttle Position Sensor, as understood, is an imperative gadget in the fuel management system of Dodge Stratus, which is popular for its trusted transaction and its ability to perform. This sensor closely manages the opening and closing of throttle effectively giving the Engine Control Unit (ECU) feedback in the fuel to air mixture ratio that will make good combustion. Thus, the role of the Dodge Stratus Throttle Position Sensor is to provide accurate signals to the fuel injection system and consequently, boost the car's acceleration, cruising, and deceleration, which is crucial for the general driving performance and safety. Designed to fit the Angel Engines Dodge Stratus models and manufactured between 1995 to 2005 In the market, the TPS suits different generations and the Stratus, the first generation has 2.0L to 2.7 L V6 engines. Dodge Stratus Throttle Position Sensor stands out in the automotive market because of the Hall effect or magnetoresistive sensors used in the advanced non-contact technology. This piece of machinery that is fundamental to the car can cause a change in fuel consumption and constant problems that require replacement of the TPS in the shortest time possible. Because of its aspects such as performance, efficiency, and safety features evident in the Dodge Stratus Throttle Position Sensor, consumers are likely to be reassured by its relevance and solidity in optimising the functionality of the car, thus upholding the inherent reliability or the Dodge Stratus to those buyers who are conscientiously searching for quality cars at market-friendly prices.

Dodge Stratus Throttle Position Sensor Parts and Q&A

Throttle Position Sensor
68405581AA
Q: How to Diagnose and Fix a Throttle Position Sensor on Dodge Stratus?
A:
Before starting the service or repair of the Throttle Position Sensor, you must remove the negative Battery Cable and the sensor electrical connector. Unscrew the two bolts that keep the throttle position sensor fastened and remove the sensor. When placing the Throttle Body during installation, slide the throttle shaft end into the part of the TPS that has two tabs and ensure the shaft touches those two tabs. If the TPS is correctly indexed, turning it slightly clockwise brings its mounting screw holes to match those in the throttle body and there is slight tension felt during rotation. If rotation is hard, turn the sensor around to place the throttle shaft away from the tabs. Secure the mounting screws to 5.1 N.m (45 in. lbs.). After fitting the sensor, make sure the throttle plate is shut; if it is not, install the sensor on the side with the tabs. Then, fix the electrical connector to the TPS and put back the negative battery cable in its position.
Throttle Position Sensor
MD628077
Q: How to Service and Repair a Throttle Position Sensor on Dodge Stratus?
A:
Before servicing or repairing the Throttle Position Sensor, lower the negative Battery Cable and the Throttle Body from the engine. After that, take out the screws holding the TPS mount, then take off the TPS. The throttle shaft should go straight into the TPS socket, with its end fitted against the socket's two internal tabs during installation. A properly indexed TPS will turn to the right a little, so the screw holes of the throttle plate are lined up with the holes in the throttle body. Replace the axis of rotation by putting the sensor with the throttle perpendicular to the guide pins. Turn the mounting screws to a torque of 5.1 Nm (45 in. lbs.). After fitting the TPS, verify that the throttle plate is closed; if it's open, adjust the sensor in the right location. After that, install the throttle body back and reattach the negative battery cable.