How to Service and Repair an Evaporator Core on Dodge Stratus?

Begin by detaching the negative battery cable and taking off the car's HVAC housing to work on the evaporator. Lift up the recirculation motor connector and remove the harness from its spot on the top of the housing. After that, disengage the seal from around the evaporator coil entrance and remove the top retaining screw. Carefully take the upper housing apart, remove it and unmount the evaporator temperature sensor. Get the evaporator out from the bottom section, then remove the styrofoam circling around it. Install the new evaporator coil in the lower housing sheet and attach the styrofoam part to stop any water from leaking inside the passenger area. Put the evaporator temperature sensor in place, the attach and secure the upper housing to the lower housing with screws. Next, plug the recirculation motor connector, put the evaporator seal into place, install the HVAC harness on the upper housing and add back the HVAC assembly in the vehicle.

How to Maintain and Fix an Evaporator on Dodge Stratus?

The first step to serving and repairing the A/C evaporator is to remove the HVAC housing and take it apart where needed to get to the evaporator. Removal of the evaporator temperature sensor should come next. Following that, lift the A/C evaporator and insulator out from the base of the HVAC housing. Should the rubber seal on the A/C evaporator's tapping plate be damaged, replace it by removing it and inserting a new one. When you install a new A/C evaporator, first add 2 fluid ounces of the correct refrigerant oil to the refrigerant system. Fasten the evaporator on the low end of the housing, so its drain is open and the evaporator insulation is set correctly. Instead the evaporator temperature sensor probe into the uppermost slot in the evaporator and afterwards fit and install the HVAC housing.

OEM Dodge Stratus Evaporator

A/C Evaporator Core

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Evaporators found

View related parts
Dodge Stratus Evaporator Core Part Number: 68234946AA
Product Specifications
- Other Name: Evaporato - A/C; A/C Evaporator Core; A/C Evaporator Core Repair Kit; A/C Evaporator; Evaporator
- Replaces: 5093469AD, 5093469AE, V9900109AB, 5093469AB, 5093469AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Stratus | ES, R/T, SE, SXT | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Dodge Stratus Evaporator Core Part Number: MR500465
Product Specifications
- Other Name: Evaporato - A/C; A/C Evaporator Core; Evaporator; Evaporator A/C
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Dodge Stratus | R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Dodge Stratus Evaporator Core Part Number: 5018751AC
Product Specifications
- Other Name: Evaporato - A/C; A/C Evaporator Core; A/C Evaporator Core Repair Kit; A/C Evaporator; Evaporator
- Replaces: V9900005AB, 5018751AA, V9900005
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004 Dodge Stratus | ES, R/T, SE, SE Plus | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Dodge Stratus Evaporator Core Part Number: 5013064AD
Product Specifications
- Other Name: Evaporato - A/C; Case Assembly; Evaporator
- Replaces: 5013064AB, V9900004AB, 5013064AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Dodge Stratus | Base, ES, SE | 2.0L L4, 2.4L L4, 2.5L V6, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Dodge Stratus Case Assembly Part Number: 5013064AA
Product Specifications
- Other Name: Evaporato - A/C; A/C Evaporator Core Repair Kit; A/C Evaporator Core; A/C Evaporator; Evaporator; Evaporator A/C
- Replaced by: 5013064AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1999 Dodge Stratus | Base, ES | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS

Dodge Stratus Evaporator

Choose OEM Evaporator that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Evaporator follows strict manufacturing steps to lock in quality and fit. If your Dodge Stratus matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Stratus parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Stratus Evaporator is one of the necessary parts for the proper functioning of the air conditioning system in the Dodge Stratus vehicles; it is characterized by high reliability and a well-deserved popularity. This evaporator plays a great role in cooling cabin by absorbing heat and in change of state of liquid refrigerant to vapor, making the car comfortable for use. The Dodge Stratus Evaporator is positioned conveniently within a car's dashboard area; the tubes of this evaporator are made of aluminum and accompanied by finned details that ensure efficient heat exchange, as well as the features of dehumidification for clearing the air moisture. That the car gadget is compatible with many Dodge Stratus models, manufactured between 1995 and 2005, is evident of its importance in regulating the interior climate. The Dodge Stratus Evaporator is quite ideal due to its resistance to the reversible changes of temperature and dirt hence likely to develop leaks. Due to the proper supply of cool air, the Dodge Stratus Evaporator is one of the most important parts to boost the efficiency and safety together with the pleasant smell in cabins. Also, their quality and work make them distinct from the normal automotive structure because they do not only meet but also surpass industry standards. In summary, the Dodge Stratus Evaporator is an embodiment of the company's values hence making it a vital addition for Stratus drivers seeking comfort and durability.

Dodge Stratus Evaporator Parts and Q&A

Evaporator Core
MR500465
Q: How to Service and Repair an Evaporator Core on Dodge Stratus?
A:
Begin by detaching the negative Battery Cable and taking off the car's HVAC housing to work on the evaporator. Lift up the recirculation motor connector and remove the harness from its spot on the top of the housing. After that, disengage the seal from around the evaporator coil entrance and remove the top retaining screw. Carefully take the upper housing apart, remove it and unmount the evaporator temperature sensor. Get the evaporator out from the bottom section, then remove the styrofoam circling around it. Install the new evaporator coil in the lower housing sheet and attach the styrofoam part to stop any water from leaking inside the passenger area. Put the evaporator temperature sensor in place, the attach and secure the upper housing to the lower housing with screws. Next, plug the recirculation motor connector, put the evaporator seal into place, install the HVAC harness on the upper housing and add back the HVAC assembly in the vehicle.
Evaporator Core
68234946AA
Q: How to Maintain and Fix an Evaporator on Dodge Stratus?
A:
The first step to serving and repairing the A/C evaporator is to remove the HVAC housing and take it apart where needed to get to the evaporator. Removal of the evaporator temperature sensor should come next. Following that, lift the A/C evaporator and insulator out from the base of the HVAC housing. Should the rubber seal on the A/C evaporator's tapping plate be damaged, replace it by removing it and inserting a new one. When you install a new A/C evaporator, first add 2 fluid ounces of the correct refrigerant oil to the refrigerant system. Fasten the evaporator on the low end of the housing, so its drain is open and the evaporator insulation is set correctly. Instead the evaporator temperature sensor probe into the uppermost slot in the evaporator and afterwards fit and install the HVAC housing.