How to Maintain Fuel Injectors on a 4-Cylinder Engine on Dodge Stratus?

Before doing any other steps, first take off the fuel rail from a 4-cylinder engine. Set the fuel rail assembly where the fuel injectors are also easily accessible. Unclamp the injector using the clip and pull the piece out to inspect the o-ring; if you find damage there, you need to replace the o-ring and the clip. Finish the process by repeating on every other injector. Place a drop of clean engine oil on the rubber O-ring to make it easier to install before putting in a new injector. Place the open end of the injector clip into the top part of the injector so the side slots of the clip hold the edge of the receiver cup. Make sure you carefully position the fuel rail receiver cap over the top end of the injector to not harm the O-ring. Remain in the same process for the other injectors and later, reassemble the fuel rail.

How to Service and Repair a Fuel Injector on Dodge Stratus?

Before servicing or repairing the fuel injectors, first pull out the fuel rail assembly to expose them. Once the injector clip and injector are removed from the fuel rail, check the O-ring for damage; if it shows any damage, you should change the O-ring and, if it's needed, change the clip. Before attaching a new injector, put a little clean engine oil on the rubber O-ring it has. Slide the top of the injector clip into the injector until the receiver cup edge fits into the clip's side slots. Insert the top of the injector into the cap on the fuel rail receiver, making sure you don't damage the O-ring. Do the same thing for the additional injectors and then carefully put the fuel rail back into place.

OEM Dodge Stratus Fuel Injector

Gas Injector

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Fuel Injectors found

View related parts
Dodge Stratus Injector Part Number: 4591986AA
$115.45 MSRP: $151.00
You Save: $35.55 (24%)
ADD TO CART
Product Specifications
- Other Name: Injector - Fuel; Gasoline Injector; Fuel Injector; Injector Fuel
- Replaces: RL591986AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2006 Dodge Stratus | ES, R/T, SE, SXT | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Dodge Stratus Injector Part Number: 4891573AB
Product Specifications
- Other Name: Injector - Fuel; Fuel Injector; Injector Fuel
- Replaces: RL891573AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2006 Dodge Stratus | SE, SXT | 4 Cyl 2.4 L GAS
View related parts
Dodge Stratus Injector Part Number: RL891345AA
Product Specifications
- Other Name: Injector - Fuel; Fuel Injector
- Replaces: 4891345AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004 Dodge Stratus | ES, SE, SE Plus, SXT | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Stratus Injector Part Number: RL669938AB
Product Specifications
- Other Name: Injector - Fuel
- Replaces: 4669938, RL669938, 4669938AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2000 Dodge Stratus | Base, ES, SE | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Stratus Injector Part Number: RL669772
Product Specifications
- Other Name: Injector - Fuel; Fuel Injector
- Replaces: 4669772
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2000 Dodge Stratus | Base, SE | 2.0L L4, 4 Cyl 2.0 L GAS
View related parts
Dodge Stratus Throttle Body Part Number: RL591756AC
Product Specifications
- Other Name: Injector - Fuel; Fuel Injector; Injector
- Replaces: 4591756AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004 Dodge Stratus | ES, R/T, SE, SE Plus, SXT | 2.7L V6, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Dodge Stratus Injector Part Number: 4669471AB
Product Specifications
- Other Name: Injector - Fuel; Fuel Injector
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997 Dodge Stratus | Base, ES | 4 Cyl 2.0 L GAS
View related parts
Dodge Stratus Injector Part Number: 5277739AB
Product Specifications
- Other Name: Injector - Fuel; Fuel Injector
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1997 Dodge Stratus | Base, ES | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Stratus Injector Part Number: MD319791
Product Specifications
- Other Name: Injector - Fuel; Fuel Injector; Injector Kit Fuel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Dodge Stratus | R/T, SE | 6 Cyl 3.0 L GAS

Dodge Stratus Fuel Injector

Choose OEM Fuel Injector that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Fuel Injector follows strict manufacturing steps to lock in quality and fit. If your Dodge Stratus matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Stratus parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Fuel Injector plays a very crucial role of determining the efficiency of a car and its durability by accurately pumping fuel into the engine cylinders of the Dodge Stratus automobiles. This new Fuel Injector system coordinated by the Engine Control Module differ from the previous carburetor system, which improves the Stratus since it was initially manufactured in mid-1990s. As for the Fuel Injector, being very durable, it helps the vehicle to sustain a nice idle as well as a powerful output while avoiding such issues as damaging of catalytic converters or oxygen sensors. Applicable to Juget and later models of Dodge Stratus as well as the second generation, this Fuel Injector works with both 2.0 L I4 and 2.7 L V6 engines and delivers the vehicle's performance capabilities to the drivers. Performance wise the Fuel Injector is an important factor in boosting up the fuel economy, the cars mileage range from 20-29 mpg, and greatly contributes to safety by adjusting the settings of air fuel mixture for cleaner emissions. The automotive industry in the Fuel Injector distinguished by the multipoint injection technology that facilitates the better atomization of fuel and combustion effectiveness. On the whole, the Fuel Injector can be recalled as being among the most faithful and efficient components, and, therefore, one of the essential tools needed by anybody owning a Dodge Stratus in order to enhance an operation of this vehicle.

Dodge Stratus Fuel Injector Parts and Q&A

Injector
4591986AA
Q: How to Maintain Fuel Injectors on a 4-Cylinder Engine on Dodge Stratus?
A:
Before doing any other steps, first take off the Fuel Rail from a 4-cylinder engine. Set the fuel rail assembly where the fuel injectors are also easily accessible. Unclamp the injector using the clip and pull the piece out to inspect the o-ring; if you find damage there, you need to replace the o-ring and the clip. Finish the process by repeating on every other injector. Place a drop of clean engine oil on the rubber O-ring to make it easier to install before putting in a new injector. Place the open end of the injector clip into the top part of the injector so the side slots of the clip hold the edge of the receiver cup. Make sure you carefully position the fuel rail receiver cap over the top end of the injector to not harm the O-ring. Remain in the same process for the other injectors and later, reassemble the fuel rail.
Injector
RL891345AA
Q: How to Service and Repair a Fuel Injector on Dodge Stratus?
A:
Before servicing or repairing the fuel injectors, first pull out the Fuel Rail assembly to expose them. Once the injector clip and injector are removed from the fuel rail, check the O-ring for damage; if it shows any damage, you should change the O-ring and, if it's needed, change the clip. Before attaching a new injector, put a little clean engine oil on the rubber O-ring it has. Slide the top of the injector clip into the injector until the receiver cup edge fits into the clip's side slots. Insert the top of the injector into the cap on the fuel rail receiver, making sure you don't damage the O-ring. Do the same thing for the additional injectors and then carefully put the fuel rail back into place.