How to Service and Repair a Fuel Filler Neck on Dodge Stratus?

Start by disconnecting the negative battery terminal and then remove all the fuel. Secure the vehicle on a hoist after removing the three screws that attach the filler neck to the quarter panel's inner edge. After that, take out the ground strap and ease the clamps at the filler neck so you can remove the filler neck from the tank. Use a transmission jack to bleed the fuel tank, support its weight, then unscrew the bolts at the tank's straps from the rear and slowly lower the tank far enough to access the filler tube vent line. Place in the new filler neck on the filler hose after discarding the old tube, then add the fuel filler vent tube. Replace the fuel tank, put the fuel tank straps on and screw them in to 54 Nm (39.8 ft. lbs). Uninstall the transmission jack, tighten the clamps to 3.6 Nm (31.8 in. lbs) and add the ground strap tightening it to 8.4 Nm (75 in. lbs). Before you do anything else, make certain the vehicle is down, then lower the filler neck and quarter panel screws to 2.3 Nm (21 in. lbs). Once you have filled the tank, inspect it and reconnect the negative terminal to the battery.

How to Maintain and Fix a Fuel Filler Neck on Dodge Stratus?

Before you service or repair the fuel filler neck, disconnect the negative battery cable and empty the fuel out of the tank. Take out the three screws that are holding the filler neck to the quarter panel. Hoist the car and make sure it is stable on the device, before taking out the ground strap. Remove the filler neck from the tank by undoing the clamps at the neck. With the transmission jack holding up the fuel tank, remove the bolts on the rear fuel tank straps and lower the fuel tank enough to access the filler tube's vent line connection. After that, remove the connection to the fuel filler tube. For assembly, attach the filler neck to the filler hose and attach the end of the fuel filler vent tube. Move the fuel tank into place, put the tank straps on with the bolts loose and fasten them to 54 Nm (39.8 ft. lbs). Unplug the transmission jack, then squeeze the clamps with 3.6 Nm (31.8 in. lbs) and pin the ground strap with 7.5 Nm (66 in. lbs). After lifting the vehicle, screw the filler neck onto the quarter panel with three screws and lock them with 1.9 Nm (16 in. lbs.) of pressure. Don't forget to add fuel, then make sure there aren't any signs of leaking and attach the negative cable to the battery.

OEM Dodge Stratus Fuel Filler Neck

Fuel Tank Filler Neck Hose Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Fuel Filler Necks found

View related parts
Dodge Stratus Filler Neck Part Number: 4764757AE
$126.90 MSRP: $187.00
You Save: $60.10 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube - Fuel Filler; Filler Pipe
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999 Dodge Stratus | Base, ES | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Dodge Stratus Filler Neck Part Number: 4764760AE
$128.03 MSRP: $189.00
You Save: $60.97 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube - Fuel Filler; Fuel Tank Filler Neck; Filler Neck Hose; Fuel Filler Hose; Fuel Filler Neck; Filler Pipe
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999 Dodge Stratus | Base, ES | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Dodge Stratus Filler Neck Part Number: 4695929
$86.09 MSRP: $109.14
You Save: $23.05 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube - Fuel Filler; Fuel Tank Filler Neck; Fuel Filler Hose; Fuel Filler Neck; Filler Pipe; Tube; Tube Fuel Filler; Tube, Filler
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1997 Dodge Stratus | Base, ES | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Dodge Stratus Filler Neck, Upper Part Number: MR487081
Product Specifications
- Other Name: Tube - Fuel Filler; Fuel Filler Neck, Upper; Fuel Tank Filler Neck; Fuel Filler Hose; Tube Fuel Filler
- Position: Upper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Dodge Stratus | R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Dodge Stratus Connector Hose, Lower Part Number: MR271412
Product Specifications
- Other Name: Hose - Fuel Filler Tube; Fuel Filler Neck, Lower; Fuel Filler Hose; Fuel Line Connector; Hose Fuel Filler Tube
- Position: Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Dodge Stratus | R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Dodge Stratus Hose Part Number: 4695726
Product Specifications
- Other Name: Hose - Fuel Tank Filler; Filler Neck Hose; Fuel Filler Hose; Fuel Filler Neck; Fuel Hose; Hose, Fuel Tank Filler; Hose Fuel Filler
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1997 Dodge Stratus | Base, ES | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Dodge Stratus Filler Neck, Upper Part Number: 4879405AD
Product Specifications
- Other Name: Tube - Fuel Filler; Fuel Filler Neck, Lower, Upper; Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe; Tube Fuel Filler
- Position: Upper
- Replaces: 4879405AB, 4879405AA, 4879405AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Stratus | ES, R/T, SE, SXT | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Dodge Stratus Filler Neck Part Number: 4764821AD
Product Specifications
- Other Name: Tube - Fuel Filler; Fuel Filler Neck; Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe
- Replaces: 4764821AB, 4764821AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Dodge Stratus | ES, R/T, SE, SE Plus | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Dodge Stratus Filler Neck Part Number: 4764926AB
Product Specifications
- Other Name: Tube - Fuel Filler; Fuel Tank Filler Neck; Filler Neck Hose; Fuel Filler Hose; Fuel Filler Neck; Filler Pipe; Tube Fuel Filler
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Dodge Stratus | ES, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS

Dodge Stratus Fuel Filler Neck

Choose OEM Fuel Filler Neck that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Fuel Filler Neck follows strict manufacturing steps to lock in quality and fit. If your Dodge Stratus matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Stratus parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

A Dodge Stratus Fuel Filler Neck functions as a vital structural element needed for smooth and safe tank refueling operations of Dodge Stratus models. This well-known Fuel Filler Neck enables smooth fuel transfer to the Dodge Stratus tank for better system performance. This vehicle component works with different Dodge Stratus models which were manufactured between 1995 and 2005 and provides durability during daily usage and meets safety requirements. Seamlessly manufactured of plastic or metal the Fuel Filler Neck presents separate strengths yet owners should observe possible deterioration or deterioration damage with time. The car Fuel Filler Neck provides dual functions for safety because it maintains vehicle fuel flow while preventing leaks. The car Fuel Filler Neck has distinctive characteristics including a secure locking system along with support for different engine types which distinguishes it from competitors in the automotive marketplace. The car Fuel Filler Neck stands out for its reliability combined with performance excellence through which it conserves the driver's security and operational efficiency when driving their Dodge Stratus vehicle.

Dodge Stratus Fuel Filler Neck Parts and Q&A

Filler Neck, Upper
4879405AD
Q: How to Service and Repair a Fuel Filler Neck on Dodge Stratus?
A:
Start by disconnecting the negative battery terminal and then remove all the fuel. Secure the vehicle on a hoist after removing the three screws that attach the filler neck to the quarter panel's inner edge. After that, take out the ground strap and ease the clamps at the filler neck so you can remove the filler neck from the tank. Use a transmission jack to bleed the Fuel Tank, support its weight, then unscrew the bolts at the tank's straps from the rear and slowly lower the tank far enough to access the filler tube vent line. Place in the new filler neck on the filler hose after discarding the old tube, then add the fuel filler vent tube. Replace the fuel tank, put the fuel tank straps on and screw them in to 54 Nm (39.8 ft. lbs). Uninstall the transmission jack, tighten the clamps to 3.6 Nm (31.8 in. lbs) and add the ground strap tightening it to 8.4 Nm (75 in. lbs). Before you do anything else, make certain the vehicle is down, then lower the filler neck and quarter panel screws to 2.3 Nm (21 in. lbs). Once you have filled the tank, inspect it and reconnect the negative terminal to the battery.
Connector Hose, Lower
MR271412
Q: How to Maintain and Fix a Fuel Filler Neck on Dodge Stratus?
A:
Before you service or repair the fuel filler neck, disconnect the negative battery cable and empty the fuel out of the tank. Take out the three screws that are holding the filler neck to the quarter panel. Hoist the car and make sure it is stable on the device, before taking out the ground strap. Remove the filler neck from the tank by undoing the clamps at the neck. With the transmission jack holding up the Fuel Tank, remove the bolts on the rear fuel tank straps and lower the fuel tank enough to access the filler tube's vent line connection. After that, remove the connection to the fuel filler tube. For assembly, attach the filler neck to the filler hose and attach the end of the fuel filler vent tube. Move the fuel tank into place, put the tank straps on with the bolts loose and fasten them to 54 Nm (39.8 ft. lbs). Unplug the transmission jack, then squeeze the clamps with 3.6 Nm (31.8 in. lbs) and pin the ground strap with 7.5 Nm (66 in. lbs). After lifting the vehicle, screw the filler neck onto the quarter panel with three screws and lock them with 1.9 Nm (16 in. lbs.) of pressure. Don't forget to add fuel, then make sure there aren't any signs of leaking and attach the negative cable to the battery.