How to Safely Service the A/C Switch on Dodge Viper?

Remove the negative battery cable and temporarily isolate the air bag system before you wait two minutes for the capacitor to discharge. Doing this is necessary to avoid air bag deployment by mistake which might result in serious injury. Now, remove the panel center bezel and disconnect electrical connectors 3 and 4 from the air-conditioning-heater switch, making sure you put the bezel on your bench. After that, unscrew the screws 2 at the mounting tabs 1 for the A/C-heater control and lift the control out of the center bezel.

How to Replace the A/C Switch in a Heater Control Assembly on Dodge Viper?

Before installing the new heater control, begin by taking off the center bezel of the instrument panel and removing the wire plugs from the cigar lighter, power window switch and rear window defogger switch. After that, lift the knee blockers on both the right and left side. Insert a firm wire or tool into the bottom hole of the headlamp, push up while pulling rearward gently and release the lock tab without damaging it. Take off the steering column shroud which could be assisted by lowering the steering wheel slightly. From there, take out the instrument panel bezel, again making sure not to damage the locking tab and remove the screws from the control assembly using a firm grip. Now pull the assembly back and remove any wire connectors, lines and cables before unplugging the switch. For uninstallation, use the steps mentioned again in reverse.

OEM Dodge Viper A/C Switch

Air Conditioning Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 A/C Switches found

View related parts
Dodge Viper Temperature Control, Silver Part Number: 68223409AD
$609.47 MSRP: $1115.00
You Save: $505.53 (46%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stack; HVAC Temperature Control Panel; Climate Control Module
- Replaces: 68223409AC, 68223409AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2017 Dodge Viper | ACR, GTC, GTS | 10 Cyl 8.4 L GAS, 8.4L V10
View related parts
Dodge Viper Temperature Control Part Number: 68223408AH
$778.60 MSRP: $910.00
You Save: $131.40 (15%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stack; HVAC Temperature Control Panel; Climate Control Module; Blower Control Switch; Dash Control Unit
- Replaces: 1UX67AAAAC, 68223408AA, 68223408AB, 68223408AC, 68223408AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2017 Dodge Viper | ACR, Base, GT, GTC, GTS | 10 Cyl 8.4 L GAS, 8.4L V10
View related parts
Dodge Viper Knob Part Number: 5093433AA
Product Specifications
- Other Name: Knob - A/C And Heater Control - Ro; HVAC Heater Control Knob; Knob A/C And Heater Control - Rotary
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Viper | SRT-10 | 10 Cyl 8.3 L GAS
View related parts
Dodge Viper Heater Control Part Number: 4865810AD
Product Specifications
- Other Name: Control - A/C And Heater; HVAC Temperature Control Panel; Climate Control Module; Blower Control Switch; Dash Control Unit; Control A/C And Heater
- Replaces: 4865810AA, 4865810AB, 4865810AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Viper
- 2003-2006 Dodge Viper | 8.3L V10
View related parts
Dodge Viper Control Assembly Part Number: 5245298
Product Specifications
- Other Name: Control - A/C And Heater; Climate Control Module; Dash Control Unit; Control A/C And Heater; Gauge, Temperature
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2002 Dodge Viper | ACR, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS
View related parts
Dodge Viper Temperature Control Part Number: 68223407AD
Product Specifications
- Other Name: Stack; HVAC Temperature Control Panel; Climate Control Module; Center Stack Upper
- Replaces: 68223407AA, 68223407AC, 1UX66AAAAC, 68223407AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2017 Dodge Viper | ACR, Base, GT, GTC, GTS | 10 Cyl 8.4 L GAS, 8.4L V10
View related parts
Dodge Viper Temperature Control Part Number: 5091906AC
Product Specifications
- Other Name: Stack; HVAC Temperature Control Panel; Climate Control Module
- Replaces: 5091906AB, 5091906AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2017 Dodge Viper | ACR, Base, GT, GTC, GTS | 10 Cyl 8.4 L GAS, 8.4L V10
View related parts
Dodge Viper Temperature Control Part Number: 5091905AC
Product Specifications
- Other Name: Stack; HVAC Temperature Control Panel; Climate Control Module
- Replaces: 5091905AB, 5091905AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2017 Dodge Viper | ACR, Base, GT, GTC, GTS | 10 Cyl 8.4 L GAS, 8.4L V10

Dodge Viper A/C Switch

Choose OEM A/C Switch that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each A/C Switch follows strict manufacturing steps to lock in quality and fit. If your Dodge Viper matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Viper parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

A Dodge Viper vehicle's climate control functionality depends on the reliable and performance-oriented Dodge Viper A/C Switch unit. With its A/C Switch vehicle operators gain effective control of interior temperatures during all driving conditions for better comfort. Different Viper models can use the A/C Switch which has adapted through time to incorporate buttons as well as dials and knobs for user interface enhancement. The Dodge company maintains its dedication to innovation through product development by moving its systems from simple controls towards next-gen automatic temperature systems that apply real-time sensor readings for optimal performance. Through its A/C Switch control system drivers achieve better operational efficiency and safety because the cabin temperature remains optimized to reduce driver fatigue preventing distracted driving. The Dodge Viper A/C Switch features both an engineered-strong body that functions under high-performance driving conditions as well as direct climate control module integration which allows speedy control of heating and cooling functionality. The Dodge Viper A/C Switch positions itself as an industry-leading device due to its multiple benefits to driving experience and its role as a must-have equipment for aficionados of this car manufacturer. The Dodge Viper A/C Switch demonstrates automotive engineering excellence through its high-performing design which has gained a solid reputation for durability.

Dodge Viper A/C Switch Parts and Q&A

Heater Control
4865810AD
Q: How to Safely Service the A/C Switch on Dodge Viper?
A:
Remove the negative Battery Cable and temporarily isolate the air bag system before you wait two minutes for the capacitor to discharge. Doing this is necessary to avoid air bag deployment by mistake which might result in serious injury. Now, remove the panel center bezel and disconnect electrical connectors 3 and 4 from the air-conditioning-heater switch, making sure you put the bezel on your bench. After that, unscrew the screws 2 at the mounting tabs 1 for the A/C-heater control and lift the control out of the center bezel.
Control Assembly
5245298
Q: How to Replace the A/C Switch in a Heater Control Assembly on Dodge Viper?
A:
Before installing the new heater control, begin by taking off the center bezel of the instrument panel and removing the wire plugs from the cigar lighter, Power Window Switch and rear window defogger switch. After that, lift the knee blockers on both the right and left side. Insert a firm wire or tool into the bottom hole of the headlamp, push up while pulling rearward gently and release the lock tab without damaging it. Take off the steering column shroud which could be assisted by lowering the steering wheel slightly. From there, take out the instrument panel bezel, again making sure not to damage the locking tab and remove the screws from the control assembly using a firm grip. Now pull the assembly back and remove any wire connectors, lines and cables before unplugging the switch. For uninstallation, use the steps mentioned again in reverse.