OEM Dodge Viper Heater Control Valve

HVAC Heater Control Valve
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Heater Control Valve found

  • Dodge Viper Heater Control Valve - 4642554
    Dodge Viper Heater Control Valve Diagram - 4642554
    View related parts
    Product Specifications
    • Other Name: Valve - Water Control; Heater Control Valve; Heater Valve; Valve Water Control; Valve, Water
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following Vehicles:
    • 1992-2002 Dodge Viper | ACR, Base, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS

Dodge Viper Heater Control Valve

Choose OEM Heater Control Valve that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Heater Control Valve follows strict manufacturing steps to lock in quality and fit. If your Dodge Viper matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Viper parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Viper Heater Control Valve is one of the significant components in the Viper particularly in its performance and durability in providing adequate heat to the cockpit through the management of the hot engine coolant circulation towards the heater core vehicle part. This is a crucial part of Viper that works perfectly fine for the most classical model - RT/10 and for the more contemporary GTS model. The Dodge Viper Heater Control Valve may be of cable and vacuum control or electronic control depending on the manufacturer's current design to increase efficiency and safety of the automobile. For this reason this model has a great reliability, the key factors being the sturdy construction that eliminates the potential leakages and corrosion problems that may be prevalent in the heating system. The heater control valve of the Dodge Viper should be frequently checked for appropriate functioning and must be replaced as needed so as to provide a good feel to the riders irrespective of weather conditions. Also, the Dodge Viper Heater Control Valve is distinguished in the automotive market as because of this component's integration and add-on to the overall outlook and performance of the Viper that has gone on to become legendary. Thus, increasing the efficiency of the heating system, this valve not only adds comfort to the drivers, but also becomes vital for safety of the car; therefore it remains no less an essential element of the Dodge Viper equipment.

Dodge Viper Heater Control Valve Parts and Q&A

  • Q: How to Service the Heater Control Valve in the Engine Cooling System on Dodge Viper?
    A:
    Starting any service on the engine requires the water control valve, found between the inlet and outlet heater hoses, to be lower than the level of water in the engine. Release the tension on the hose clamps connecting the water control valve, remove the heater control cable and heater hoses and remember to note where each hose goes for easy reconnection. Take out the mounting bolts from the water valve. When you install the system, take these directions in reverse to ensure that the hoses sit correctly, no more than 1/16 inch from the control valve base. Keeping the hose and nipple for the water control valve free from dirt and always dry is necessary. You should never use oil or silicone during hose installation. You will need new clamps and remember to use the Temperature Control Cable setup method for a good configuration.

Related Dodge Viper Parts