How to Service and Repair the Canister Purge Valve on Dodge Viper?

For the Canister Purge Valve service and repair, you must first lift the vehicle, then disconnect the negative battery cable. Undo the left front wheel and also get rid of the access plug in the front of the wheel well. Remove the vacuum and electrical lines from the purge valve and then take out the valve from its bracket. Attach the valve to the bracket first, link the electrical connector to the right hose and snap the left front wheel and access plug into place. Connect the battery cables in negative order, unlock the parking brake, lower the vehicle and let the Drbiii(R) scan tool check whether Ldp works correctly.

How to Install a Canister Purge Valve on Dodge Viper?

First, attach the canister purge valve to the mounting bracket (5) before going forward. After that, connect the vapor tube (4) to the V/T (B1) water tank and then the vapor tube (3) to the evaporative sensor (4). After that, attach the electrical connector (2) to the evaporative emission canister purge valve (1). After the rest is done, set up the air cleaner. After that, connect the black cable from the negative terminal and tighten its nut to 10 Nm (90 in. lbs.).

OEM Dodge Viper Canister Purge Valve

Vapor Canister Purge Valve EVAP

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Canister Purge Valves found

View related parts
Dodge Viper Solenoid Valve Part Number: 4669475AB
$83.12 MSRP: $128.00
You Save: $44.88 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Solenoid - Duty Cycle Purge; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Canister Purge Valve; Purge Valve; Solenoid Duty Cycle Purge; Service with Item #1; Linear Purge.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2006 Dodge Viper | ACR, GT2, GTS, R/T-10, SRT-10 | 10 Cyl 8.0 L GAS, 10 Cyl 8.3 L GAS
View related parts
Dodge Viper Purge Valve Part Number: 4891731AC
$60.32 MSRP: $90.20
You Save: $29.88 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Linear Purge; Purge Solenoid; Purge Control Valve
- Replaces: 4891731AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2017 Dodge Viper | 8.4L V10
- 2008-2010 Dodge Viper | 8.4L V10
View related parts
Dodge Viper Solenoid Valve Part Number: 5227635
Product Specifications
- Other Name: Solenoid - Duty Cycle Purge; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Canister Purge Valve; Purge Solenoid; Vacuum Solenoid; 2.5L & 5.2L Engine options; Duty Cycle Purge; Dual Vacuum.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1992-1996 Dodge Viper | Base, GTS | 10 Cyl 8.0 L GAS

Dodge Viper Canister Purge Valve

Choose OEM Canister Purge Valve that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Canister Purge Valve follows strict manufacturing steps to lock in quality and fit. If your Dodge Viper matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Viper parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Viper Canister Purge Valve stands as a vital system component which controls fuel vapor transport between the charcoal canister and engine intake manifold in the EVAP emission control system. The Dodge Viper Canister Purge Valve enables safer and more efficient operation by allowing vapors to burn inside the engine from the canister. The Dodge Viper Canister Purge Valve maintains top performance in multiple Viper models which enables drivers to enjoy complete power from this sportscar iconic to its reliability. During engine operation the Canister Purge Valve uses its opening function to create vacuum pressure that draws vapors and air into the motor system to meet emissions requirements. A defective Dodge Viper Canister Purge Valve creates environmental problems while activating the security light to indicate the necessity of vehicle examination. The Dodge automobile Canister Purge Valve stands out through its dependable structure as well as its capacity to serve different car models which ensures strong performance for enthusiasts. The car Canister Purge Valve exemplifies the automaker model engineering excellence by providing essential performance-based contribution to the legendary vehicle history.

Dodge Viper Canister Purge Valve Parts and Q&A

Solenoid Valve
4669475AB
Q: How to Service and Repair the Canister Purge Valve on Dodge Viper?
A:
For the Canister Purge Valve service and repair, you must first lift the vehicle, then disconnect the negative Battery Cable. Undo the left front wheel and also get rid of the access plug in the front of the wheel well. Remove the vacuum and electrical lines from the purge valve and then take out the valve from its bracket. Attach the valve to the bracket first, link the electrical connector to the right hose and snap the left front wheel and access plug into place. Connect the battery cables in negative order, unlock the parking brake, lower the vehicle and let the Drbiii(R) scan tool check whether Ldp works correctly.
Purge Valve
4891731AC
Q: How to Install a Canister Purge Valve on Dodge Viper?
A:
First, attach the canister purge valve to the mounting bracket (5) before going forward. After that, connect the vapor tube (4) to the V/T (B1) water tank and then the vapor tube (3) to the evaporative sensor (4). After that, attach the electrical connector (2) to the evaporative emission canister purge valve (1). After the rest is done, set up the air cleaner. After that, connect the black cable from the negative terminal and tighten its nut to 10 Nm (90 in. lbs.).