How to Service and Repair an Exhaust Manifold on Dodge Viper?

The first step to service or repair exhaust manifolds is to take the heat shields off the exhausts. Raise your car and then loosen and remove the V-Band clamp at the exhaust manifold. After that, unplug the oxygen sensor, use a wrench to remove the bolts attaching the manifold and then get rid of the manifold. Before attaching the exhaust manifold, place a new gasket and tighten the joining nuts to 23 Nm (200 inch lbs.). Join the end of the exhaust pipe to the manifold and attach a new V-Band clamp, tightening it until you reach 11 Nm (100 inch lbs.). Join the electric connector of the oxygen sensor, then fit the heat shields on and secure the fasteners to 6 Nm (50 inch lbs.).

How to Remove and Replace the Left Exhaust Manifold on Dodge Viper?

To guarantee the powder coating stays protected, first place some kind of protection for the cylinder head covers under the manifold while working. Securely fasten the new exhaust manifold to the block with the pair of nuts, both to a tightness of 29 Nm (257 in. lbs.). Lower the engine when the jack is out and lift the vehicle with a hoist. Pull the exhaust pipe to the manifold and put on a V-Band clamp, tightening it until it measures 11 Nm or 100 in. lbs. Fit the mount to the frame nut and tighten it to 102 Nm (75 ft. lbs.), then link the upstream oxygen sensor wire to its plug. Reduce the suspension and after that set the cylinder head cover into place. After that, set up the front strut tower onto the brace and the air cleaner housing. After that, attach the negative battery cable, put on the battery cover and pull down the trunk lid.

OEM Dodge Viper Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Exhaust Manifolds found

View related parts
Dodge Viper Exhaust Manifold Part Number: 4848341
$476.52 MSRP: $1010.00
You Save: $533.48 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Manifold; Manifold Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2002 Dodge Viper | ACR, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS
View related parts
Dodge Viper Exhaust Manifold Part Number: 5038732AA
$1179.35 MSRP: $1390.00
You Save: $210.65 (16%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Manifold; Manifold Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2017 Dodge Viper | ACR, Base, GT, GTC, GTS | 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Exhaust Manifold Part Number: 5038733AA
$1145.00 MSRP: $1345.00
You Save: $200.00 (15%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Manifold; Manifold Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2017 Dodge Viper | ACR, Base, GT, GTC, GTS | 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Exhaust Manifold Part Number: 5245700
Product Specifications
- Other Name: Manifold - Exhaust; Manifold; Manifold, Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993 Dodge Viper | Base | 10 Cyl 8.0 L GAS
View related parts
Dodge Viper Exhaust Manifold, Driver Side Part Number: 5245611
Product Specifications
- Other Name: Manifold - Exhaust - Left; Manifold; Manifold, Exhaust
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1995 Dodge Viper | Base | 10 Cyl 8.0 L GAS
View related parts
Dodge Viper Exhaust Manifold Part Number: 4763771
Product Specifications
- Other Name: Manifold - Exhaust; Manifold; Manifold, Exhaust; Manifold Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-1997 Dodge Viper | Base, GTS, R/T-10 | 10 Cyl 8.0 L GAS
View related parts
Dodge Viper Exhaust Manifold Part Number: 4763770
Product Specifications
- Other Name: Manifold - Exhaust; Manifold; Manifold, Exhaust; Manifold Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-1997 Dodge Viper | Base, GTS, R/T-10 | 10 Cyl 8.0 L GAS
View related parts
Dodge Viper Exhaust Manifold, Driver Side Part Number: 5037705AC
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left; Manifold; Manifold Exhaust
- Position: Driver Side
- Replaces: 5037705AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Viper | SRT-10, SRT-10 ACR | 10 Cyl 8.4 L GAS, 8.4L V10
View related parts
Dodge Viper Exhaust Manifold, Passenger Side Part Number: 5037704AC
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Manifold; Manifold Exhaust
- Position: Passenger Side
- Replaces: 5037704AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Viper | SRT-10, SRT-10 ACR | 10 Cyl 8.4 L GAS, 8.4L V10
View related parts
Dodge Viper Exhaust Manifold, Driver Side Part Number: 5037197AD
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left; Manifold
- Position: Driver Side
- Replaces: 5037197AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Viper | SRT-10 | 10 Cyl 8.3 L GAS, 8.3L V10
View related parts
Dodge Viper Exhaust Manifold Part Number: 4848342
Product Specifications
- Other Name: Manifold - Exhaust; Manifold; Manifold Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2002 Dodge Viper | ACR, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS
View related parts
Dodge Viper Exhaust Manifold, Passenger Side Part Number: 5037196AD
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Manifold
- Position: Passenger Side
- Replaces: 5037196AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Viper | SRT-10 | 10 Cyl 8.3 L GAS, 8.3L V10

Dodge Viper Exhaust Manifold

Choose OEM Exhaust Manifold that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Exhaust Manifold follows strict manufacturing steps to lock in quality and fit. If your Dodge Viper matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Viper parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Viper Exhaust Manifold is a very important part that makes a huge different in the entire Dodge Viper series. Constructed to be very strong as it directs harmful hot gases produced by the engine, this part known as the Exhaust Manifold eradicates phenomena known as intake reversion to afford the engine the highest degree of efficiency possible. This is even more important for a number of the Viper models since the manifold is designed depending on the requirement of each configuration of an engine whether it is the traditional V8 or even the enhanced V10. The Dodge Viper Exhaust Manifold commonly comes as a cast iron or stainless steel product which not only has a long life but also offers a safeguard to subjects it commuters by expunging injurious fumes. Due to the complex structure, consisting of intertwined tubes for the intercooler and other components, it gathers exhaust gases and improves the engine in its totality. Also, the Dodge Viper Exhaust Manifold is another critical component in the series that has the responsibility of cutting down the flow resistance responsible for enhancing horsepower and torque. Other characteristics, for example, the availability of ceramic coatings, establish this manifold in the automobile industry, contributing to the regulation of heat in the engine compartment. In conclusion, the Dodge Viper Exhaust Manifold is one of the best examples of durability, power, and protection; thus, making the Dodge Viper a legendary symbol of American cars.

Dodge Viper Exhaust Manifold Parts and Q&A

Exhaust Manifold
4848341
Q: How to Service and Repair an Exhaust Manifold on Dodge Viper?
A:
The first step to service or repair exhaust manifolds is to take the heat shields off the exhausts. Raise your car and then loosen and remove the V-Band clamp at the exhaust manifold. After that, unplug the Oxygen Sensor, use a wrench to remove the bolts attaching the manifold and then get rid of the manifold. Before attaching the exhaust manifold, place a new gasket and tighten the joining nuts to 23 Nm (200 inch lbs.). Join the end of the exhaust pipe to the manifold and attach a new V-Band clamp, tightening it until you reach 11 Nm (100 inch lbs.). Join the electric connector of the oxygen sensor, then fit the heat shields on and secure the fasteners to 6 Nm (50 inch lbs.).
Exhaust Manifold, Driver Side
5037705AC
Q: How to Remove and Replace the Left Exhaust Manifold on Dodge Viper?
A:
To guarantee the powder coating stays protected, first place some kind of protection for the cylinder head covers under the manifold while working. Securely fasten the new exhaust manifold to the block with the pair of nuts, both to a tightness of 29 Nm (257 in. lbs.). Lower the engine when the jack is out and lift the vehicle with a hoist. Pull the exhaust pipe to the manifold and put on a V-Band clamp, tightening it until it measures 11 Nm or 100 in. lbs. Fit the mount to the frame nut and tighten it to 102 Nm (75 ft. lbs.), then link the upstream Oxygen Sensor wire to its plug. Reduce the suspension and after that set the cylinder head cover into place. After that, set up the front strut tower onto the brace and the air cleaner housing. After that, attach the negative Battery Cable, put on the battery cover and pull down the trunk lid.