How to Remove and Install the Exhaust Manifold on a 4.0L Engine on Jeep Cherokee?

Because the two manifolds use one common gasket at the head, they must be removed and replaced as a unit on the 4.0L engine. Both the exhaust manifold and the intake manifold should be put in place together, using the common gasket.

How to Effectively Service and Repair an Exhaust Manifold on Jeep Cherokee?

First, take out the battery negative cable and set the vehicle on ramps. Release the exhaust pipe from the engine exhaust manifold, lower the vehicle and take out fasteners 2 - 5 to remove the intake manifold. After that, unscrew fasteners 1, 6 and 7 to take off the engine exhaust manifold. Make sure to clean the intake manifold, engine exhaust and the parts where the cylinder head joins, to keep foreign substances from entering it. Secure a new intake manifold gasket above the alignment studs on the cylinder head and place the engine exhaust manifold assembly so it straddles the end studs and spacer. Bolt No. 1 to 41 Nm (30 ft. lbs.), then install the intake manifold and bolt bolts 2 - 5 to 31 Nm (23 ft. lbs.). Attach new engine exhaust manifold spacers over the mounting studs in the cylinder head and tighten nuts 6 and 7 until they reach 23 Nm (17 ft. lbs.) torque. Attach all the parts to the intake manifold, raise the vehicle, then bolt on the exhaust pipe to the engine exhaust manifold, tightening the screws to 31 Nm (23 ft. lbs.). Then reconnect the battery negative cable and start the vehicle to check for leaks.

OEM Jeep Cherokee Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Exhaust Manifolds found

View related parts
Jeep Cherokee Exhaust Manifold Part Number: 68234997AC
$1613.50 MSRP: $2335.00
You Save: $721.50 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Exhaust And Catalytic Converter; Catalytic Converter with Integrated Exhaust Manifold; Manifold Converter; Manifold W/Converter; Manifold Exhaust And Catalytic Converter Maniverter; Manifold Exhaust
- Replaces: 68234997AB, 68197576AB, 68234997AA, 68197576AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2022 Jeep Cherokee | 75th Anniversary, Altitude, High Altitude, Latitude, Latitude Plus, Limited, Overland, Sport, Trailhawk | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Jeep Cherokee Exhaust Manifold Part Number: 68432342AA
$1721.10 MSRP: $3075.00
You Save: $1353.90 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Exhaust And Catalytic Converter; Catalytic Converter with Integrated Exhaust Manifold; Manifold W/Converter; Exhaust and Catalytic Converter Maniverter.
- Replaces: 68403179AA, 68367991AA, 68081821AB, 68081821AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2023 Jeep Cherokee
- 2015-2019 Jeep Cherokee | 2.4L L4
View related parts
Jeep Cherokee Exhaust Manifold Part Number: 68315810AA
$670.59 MSRP: $970.00
You Save: $299.41 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Exhaust And Catalytic Converter; Catalytic Converter with Integrated Exhaust Manifold; Manifold W/Converter; Manifold Exhaust And Catalytic Converter Maniverter; Manifold Exhaust; Catalytic Converter
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2022 Jeep Cherokee | Altitude, High Altitude, Latitude, Latitude Plus, Limited, Overland, Sport, Trailhawk | 4 Cyl 2.4 L GAS
View related parts
Jeep Cherokee Exhaust Manifold Part Number: 53008860AB
Product Specifications
- Other Name: Manifold - Exhaust; Manifold
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-2000 Jeep Cherokee | Base, SE | 4 Cyl 2.5 L GAS
View related parts
Jeep Cherokee Exhaust Manifold, Passenger Side Part Number: 53010199
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Manifold; Manifold Exhaust
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2001 Jeep Cherokee | Classic, Limited, SE, Sport | 6 Cyl 4.0 L GAS
View related parts
Jeep Cherokee Exhaust Manifold, Driver Side Part Number: 53010196
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left; Manifold; Manifold Exhaust
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2001 Jeep Cherokee | Classic, Limited, SE, Sport | 6 Cyl 4.0 L GAS
View related parts
Jeep Cherokee Manifold Part Number: 53006244
Product Specifications
- Other Name: Manifold - W/Shroud Assembly - Exhaust; Exhaust Manifold; Manifold, Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987-1990 Jeep Cherokee | Base, Chief, Laredo, Limited, Pioneer, Sport | 6 Cyl 4.0 L GAS
View related parts
Jeep Cherokee Manifold Part Number: 4713055
Product Specifications
- Other Name: Manifold - Exhaust; Manifold, Exhaust
- Replaces: 33002509
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1984-1990 Jeep Cherokee | Base, Chief, Laredo, Pioneer, Sport | 2.5L L4, 4 Cyl 2.5 L GAS
View related parts
Jeep Cherokee Intake Manifold Part Number: 4883385
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold; Manifold; Manifold Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-2001 Jeep Cherokee | Base, Briarwood, Classic, Country, Laredo, Limited, SE, Sport | 6 Cyl 4.0 L GAS

Jeep Cherokee Exhaust Manifold

Choose OEM Exhaust Manifold that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Exhaust Manifold follows strict manufacturing steps to lock in quality and fit. If your Jeep Cherokee matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Cherokee parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Exhaust Manifold of Jeep Cherokee automobile model is a vital component that helps in the emission management of the car besides contributing to the overall performance of the vehicle by correctly channeling the detrimental emissions far from the engine. Usually made of cast iron or stainless steel, the exhaust manifold gathers exhaust emissions from a number of pistons into a single pipe. Throughout the many years for Jeep Cherokee models, different types have been employed for exhaust manifolds including replacements that are headers that reduce the flow restriction and thereby improves the engine performance. These headers enhance velocity of the exhaust gas thus increasing the performance of the car generally. Some of these include inspecting the exhaust for cracks and replacing the manifold gasket since they are critical to the Jeep Cherokee's exhaust manifold system so as to avoid leaks and maintain their maximum usability.

Jeep Cherokee Exhaust Manifold Parts and Q&A

Intake Manifold
4883385
Q: How to Remove and Install the Exhaust Manifold on a 4.0L Engine on Jeep Cherokee?
A:
Because the two manifolds use one common gasket at the head, they must be removed and replaced as a unit on the 4.0L engine. Both the exhaust manifold and the Intake Manifold should be put in place together, using the common gasket.
Exhaust Manifold
53008860AB
Q: How to Effectively Service and Repair an Exhaust Manifold on Jeep Cherokee?
A:
First, take out the battery negative cable and set the vehicle on ramps. Release the Exhaust Pipe from the engine exhaust manifold, lower the vehicle and take out fasteners 2 - 5 to remove the Intake Manifold. After that, unscrew fasteners 1, 6 and 7 to take off the engine exhaust manifold. Make sure to clean the intake manifold, engine exhaust and the parts where the cylinder head joins, to keep foreign substances from entering it. Secure a new intake manifold gasket above the alignment studs on the cylinder head and place the engine exhaust manifold assembly so it straddles the end studs and spacer. Bolt No. 1 to 41 Nm (30 ft. lbs.), then install the intake manifold and bolt bolts 2 - 5 to 31 Nm (23 ft. lbs.). Attach new engine exhaust manifold spacers over the mounting studs in the cylinder head and tighten nuts 6 and 7 until they reach 23 Nm (17 ft. lbs.) torque. Attach all the parts to the intake manifold, raise the vehicle, then bolt on the exhaust pipe to the engine exhaust manifold, tightening the screws to 31 Nm (23 ft. lbs.). Then reconnect the battery negative cable and start the vehicle to check for leaks.