How to Service a Pitman Arm on Jeep Cherokee?

Before removing the Pitman Arm, press the cotter pin and nut off the drag link at the arm, then use a puller to disconnect the drag link ball stud from the pitman arm. Following this, unfasten the nut and washer from the steering gear shaft, label the pitman shaft and pitman arm so you know where to place them when you install them and take the pitman arm from the steering gear with Puller C-4150-A. The next step is to fit the pitman arm onto the gear shaft, then add the washer and screw the nut on till you reach 251 Nm (185 ft. lbs.). Next, add the drag link ball stud onto the pitman arm, screw in the nut to 74 Nm (55 ft. lbs.) and complete by putting in a new cotter pin.

OEM Jeep Cherokee Pitman Arm

Steering Pitman Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Pitman Arms found

View related parts
Jeep Cherokee Pitman Arm Part Number: 52000616
Product Specifications
- Other Name: Arm Pitman; Arm, Pittman; Arm, Pitman
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1984-1993 Jeep Cherokee | Base, Briarwood, Chief, Country, Laredo, Limited, Pioneer, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Jeep Cherokee Pitman Arm Part Number: 52000615
Product Specifications
- Other Name: Arm - Pitman; Arm, Pittman; Arm, Pitman; Arm Pitman
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1984-2001 Jeep Cherokee | Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS

Jeep Cherokee Pitman Arm

Choose OEM Pitman Arm that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Pitman Arm follows strict manufacturing steps to lock in quality and fit. If your Jeep Cherokee matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Cherokee parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Steering wheel to Rack pinion mechanism in Jeep Cherokee is very crucial to change rotary motion into linear movement to control the direction of the vehicle is known as Pitman Arm. This component involves the earning sector shaft of the steering box to the drag link so that it can move as required to turn the wheels left or right, which is very crucial in driving. In the various generations and years of manufacturing Jeep Cherokee models, Pitman Arms have come in different styles, material and construction. Earlier models perhaps included basic structures and the later models are usually made up of steel and include important functions like ball joints and bearings to improve on performance. The Pitman Arm must be strong and durable, because wear and tear may develop in the component and cause steering play, in the Jeep Cherokee and thus affect the road handling capabilities of the vehicle.

Jeep Cherokee Pitman Arm Parts and Q&A

Pitman Arm
52000615
Q: How to Service a Pitman Arm on Jeep Cherokee?
A:
Before removing the Pitman Arm, press the cotter pin and nut off the drag link at the arm, then use a puller to disconnect the drag link ball stud from the pitman arm. Following this, unfasten the nut and washer from the steering gear shaft, label the pitman shaft and pitman arm so you know where to place them when you install them and take the pitman arm from the steering gear with Puller C-4150-A. The next step is to fit the pitman arm onto the gear shaft, then add the washer and screw the nut on till you reach 251 Nm (185 ft. lbs.). Next, add the drag link ball stud onto the pitman arm, screw in the nut to 74 Nm (55 ft. lbs.) and complete by putting in a new cotter pin.