JeepParts
My Garage
My Account
Cart
OEM Jeep Commander Automatic Transmission Shifter
AT Shifter- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Automatic Transmission Shifters found
Jeep Commander Gear Shift Assembly Part Number: 52124690AE
Jeep Commander Gear Shift Assembly Part Number: 68374937AA
Jeep Commander Gear Shift Assembly Part Number: 52124692AE
Jeep Commander Gear Shift Assembly Part Number: 52124693AH
Jeep Commander Gear Shift Assembly Part Number: 52124691AH
Jeep Commander Gear Shift Assembly Part Number: 68374939AA
Jeep Commander Automatic Transmission Shifter
Choose OEM Automatic Transmission Shifter that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Automatic Transmission Shifter follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.
Jeep Commander Automatic Transmission Shifter Parts and Q&A
- Q: How to Install an Automatic Transmission Shifter on Jeep Commander?A:After placing the shifter on the floorpan, hold it in place with bolts and tighten them to 12 Nm (105 in.lbs.). Before touching the shifter assembly, make sure the floor shifter is in the PARK position and loose the adjustment nut. Connect the end of the gearShift Cable to the shift lever pin and secure the park lock cable to the cam part of the shift mechanism and the notch in the shifter assembly. Check that the key is put in the LOCK position and stays there while you are adjusting the cable and make sure the park lock tab is pulled all the way up and unlocked. Make sure the wiring connectors are smooth on the shifter assembly, double-check that the shift lever is in PARK and tighten the adjustment screw to 30 Nm (265 in.lbs.). When you've double-checked PARK and LOCK, push the adjust tab on the park lock cable downward and hold it to secure the position. Make sure the shifter, park lock and BTSI are all working properly and if not, replace them. If this is not required, attach the shelving over the shifter and park lock cables to the housing with bolts. In place of the removed console parts, slide back the center console and TV panel over their rails.
- Q: How to Remove an Automatic Transmission Shifter on Jeep Commander?A:Before taking out the shifter, you must remove any console pieces that are in the way to reach the assembly and cables. Should it be required, remove the bolts securing the shield that covers both gearshift and park lock cables to the shifter assembly and then remove the shield. After the transmission is in PARK, undo the retainer at the notch(4) in the shifter assembly, disconnect the transmission Shift Cable (3) at the lever(1) and pull out the shift cable. Turn the key to the LOCK setting and remove the park lock cable (5) from where it connects to the shifter mechanism cam and the notch on the shifter assembly. After that, separate all connectors (2, 3) from the shifter (1) and take out all bolts (2) keeping the shifter (1) in place on the floor pan. In the end, take out the shifter assembly (1) from the vehicle.
