How to Remove and Replace Brake Pads on the Front Wheels on Jeep Commander?

Raise and support the vehicle before taking the wheel and tire off, in order to swap out the front brake pads. Returning fluid to the master cylinder brake reservoir through a clean suction gun, drain only a bit at a time. Following that, get rid of the 2 caliper mounting bolts. Press your caliper together and then take it off the adaptor. Join the caliper to a suspension part with wire, but make sure the brake hose is not holding up any weight from the caliper. Remove both inboard and outboard brake pads from the caliper adapter and after that take out the anti-rattle clips from the caliper adapter.

How to Service and Repair Front Brake Pads on Jeep Commander?

Start the brake pad service or repair by cleaning away all the rust and debris from the back sides of the anti-rattle clip mounting points on the brake caliper adapter. After that, put in some anti-rattle clips into the caliper adapter. After that, secure the inboard and outboard brake pads onto the caliper adapter and finish by fitting the caliper onto the adapter. Make sure the slide pin bolts are tightened to 44 Nm (32 ft. lbs.). Once the bearings are in, fit the wheel and tire, take out the support and drop the vehicle. Once the pedal is at its lowest position, press on the pedal while pumping it one more time until everything seats correctly and the brake fluid level is correct.

OEM Jeep Commander Brake Pads

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Pads found

View related parts
Jeep Commander Brake Pads, Front Part Number: 5080868AC
$108.93 MSRP: $162.00
You Save: $53.07 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit - Front Disc Brake; Disc Brake Pad Set, Front; Disc Brake Hardware Kit; Disc Brake Pad Kit; Front Pads; Pad Kit Front Disc Brake
- Position: Front
- Replaced by: 5080868AD
- Replaces: 5080868AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Pad Kit - Front Disc Brake Part Number: 5080868AD
$123.68 MSRP: $162.00
You Save: $38.32 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: FRONT DISC BRAKE
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Jeep Commander Brake Pads

Choose OEM Brake Pads that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Brake Pads follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Jeep Commander Brake Pads are the essential friction components that help in slowing down and stopping the vehicle by clamping against the rotors and converting the motion into heat. The Brake Pads incorporate a friction compound with a steel backing plate. In addition, two Brake Pads with a caliper operate on every wheel. Built-in mechanical indicators, electronic sensors and other indicators warn the driver as the lining material wears and its thickness approaches minimum set by the manufacturer. These pads improve stopping power over drum brakes; they offer stronger and more fade resistant performance. Jeep owners will find that Commanders can take Brake Pads materials of non-metallic, semi-metallic, fully-metallic or ceramic which represent a combination of grip, noise, durability and environmental goals like reduced copper content. Regularly examine your Brake Pads, as worn pads increase the stopping distance of your car. When applied under normal conditions, a replacement is typically required at about 50,000 miles, so the Jeep Commander can stop reliably. The correct Brake Pads will ensure that the braking system on the Jeep Commander continues to operate efficiently.

Jeep Commander Brake Pads Parts and Q&A

Pad Kit - Front Disc Brake
5080868AD
Q: How to Remove and Replace Brake Pads on the Front Wheels on Jeep Commander?
A:
Raise and support the vehicle before taking the wheel and tire off, in order to swap out the front brake pads. Returning fluid to the master cylinder brake reservoir through a clean suction gun, drain only a bit at a time. Following that, get rid of the 2 caliper mounting bolts. Press your caliper together and then take it off the adaptor. Join the caliper to a suspension part with wire, but make sure the brake hose is not holding up any weight from the caliper. Remove both inboard and outboard brake pads from the caliper adapter and after that take out the anti-rattle clips from the caliper adapter.
Brake Pads, Front
5080868AC
Q: How to Service and Repair Front Brake Pads on Jeep Commander?
A:
Start the brake pad service or repair by cleaning away all the rust and debris from the back sides of the anti-rattle clip mounting points on the brake caliper adapter. After that, put in some anti-rattle clips into the caliper adapter. After that, secure the inboard and outboard brake pads onto the caliper adapter and finish by fitting the caliper onto the adapter. Make sure the slide pin bolts are tightened to 44 Nm (32 ft. lbs.). Once the bearings are in, fit the wheel and tire, take out the support and drop the vehicle. Once the pedal is at its lowest position, press on the pedal while pumping it one more time until everything seats correctly and the brake fluid level is correct.