How to service and repair the parking brake Backing Plate on Jeep Commander?

To access the parking brake backing plate for servicing and repair, take off the wheel and tire assembly and then take off the disc brake caliper slide bolts and the rotor. Next, remove the wheel speed sensor and the axle flange nuts, before removing the axle shaft and the park brake shoes. Unofficial Longitudinal Beam Bracket Note that parking brake cable was not attached to the brake actuator lever. Next, remove this bolt to detach the bracket from the axle tube.

How to install the parking brake Backing Plate on Jeep Commander?

Install the support plate on the axle flange and tighten the attached bolts to 115 Nm (85 ft. lbs.) then install parking brake backing plate. After that, put the parking brake cable in the brake actuator lever and install the park brake shoes. Subsequently, you will put the axle shaft in place and then secure it with the axle shaft flange nuts. Perform installation of wheel speed sensor and adjustment of brake shoes to the drum using brake gauge. After that, you will install the rotor, then caliper and slide bolts. In conclusion, install the wheel and tire unit.

OEM Jeep Commander Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Backing Plates found

View related parts
Jeep Commander Backing Plate, Front Driver Side Part Number: 52090433AC
$25.54 MSRP: $37.80
You Save: $12.26 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Left; Splash Shield; Dust Shield; Shield Splash; Brake Dust Shield
- Position: Front Driver Side
- Replaces: 52090433AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Backing Plate, Front Passenger Side Part Number: 52090432AC
$25.54 MSRP: $37.80
You Save: $12.26 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Right; Splash Shield; Dust Shield; Shield Splash; Brake Dust Shield
- Position: Front Passenger Side
- Replaces: 52090432AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Backing Plate, Rear Part Number: 52089418AC
Product Specifications
- Other Name: Plate - Parking Brake; Parking Brake Assembly, Rear; Brake Caliper Bracket; Brake Dust Shield; Adapter
- Position: Rear
- Replaces: 52089418AB, 52089418AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Jeep Commander Backing Plate

Choose OEM Backing Plate that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Backing Plate follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Jeep Commander Backing Plate Parts and Q&A

Backing Plate, Front Driver Side
52090433AC
Q: How to service and repair the parking brake Backing Plate on Jeep Commander?
A:
To access the parking brake backing plate for servicing and repair, take off the wheel and tire assembly and then take off the disc brake caliper slide bolts and the rotor. Next, remove the wheel speed sensor and the axle flange nuts, before removing the axle shaft and the park brake shoes. Unofficial Longitudinal Beam Bracket Note that parking brake cable was not attached to the brake actuator lever. Next, remove this bolt to detach the bracket from the axle tube.
Backing Plate, Front Passenger Side
52090432AC
Q: How to install the parking brake Backing Plate on Jeep Commander?
A:
Install the support plate on the axle flange and tighten the attached bolts to 115 Nm (85 ft. lbs.) then install parking brake backing plate. After that, put the parking brake cable in the brake actuator lever and install the park brake shoes. Subsequently, you will put the axle shaft in place and then secure it with the axle shaft flange nuts. Perform installation of wheel speed sensor and adjustment of brake shoes to the drum using brake gauge. After that, you will install the rotor, then caliper and slide bolts. In conclusion, install the wheel and tire unit.