How to Install an ABS Control Module in the Hydraulic Control Unit for Antilock Brakes on Jeep Commander?

Attach the 3 ABM mounting bolts to the Hydraulic Control Unit and tighten each of them to 12 Nm (9 ft. lbs.). After that, use the bracket to mount the HCU onto the vehicle and attach it with 2 nuts. Link the four lines from the chassis at the HCU first and then fit the secondary brake line to both the HCU and the master cylinder. Following that, place the primary brake line where it connects to the master cylinder and HCU. Connect the HCU electrical connector again and connect the negative battery cable. Eliminate the brake pedal prop rod and then you should bleed the base and ABS brake systems. After that, connect the scan tool and conduct the ABS Verification Test to initiate the ABM.

How to Remove the ABS Control Module from the Hydraulic Control Assembly on Jeep Commander?

Before you remove the Hydraulic Control Assembly for the Antilock Brakes, ensure you remove the negative battery cable from the battery. After that, set up a brake pedal prop and empty the master cylinder. Raise the car and remove the brake line from the master cylinder, then remove the same brake line from the HCU 4. After that, take out the secondary brake tube from the master cylinder and the HCU 4. After that, clip out the 4 blue connector lines at the HCU 4 and disconnect both sets of connectors for it. Disconnect the nuts from bracket 5 found on the HCU and then take both the HCU 3 and the bracket out from the vehicle. Remove the three bolts that hold the ABM 1 onto the HCU 2 near the end.

OEM Jeep Commander ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 ABS Control Modules found

View related parts
Jeep Commander Control Module Part Number: 68046388AA
$751.40 MSRP: $1135.00
You Save: $383.60 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control - Anti-Lock Brake; ABS Hydraulic Assembly; ABS Control Module; Modulator Valve; ABS Control Unit; Modulator; Control Unit Anti-Lock Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Jeep Commander | Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Control Module Part Number: 68037915AB
Product Specifications
- Other Name: Control - Anti-Lock Brake; Electronic Stability System Control Module; ABS Hydraulic Assembly; ABS Control Module; ABS Control Unit; Stab Control Module; Control Unit Anti-Lock Brake
- Replaces: 68037915AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Jeep Commander | Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Control Module Part Number: 68065989AA
Product Specifications
- Other Name: Module - Anti-Lock Brake System; ABS Control Module; Module; Module Anti-Lock Brake System
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Jeep Commander | Limited, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Control Module Part Number: 68004830AD
Product Specifications
- Other Name: Module - ABS; ABS Control Module; Module
- Replaces: 68004830AC, 68004830AA, 5179776AC, 68004830AB, 5179776AA, 5179776AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Control Module Part Number: 68046389AA
Product Specifications
- Other Name: Module - Anti-Lock Brake System; ABS Control Module; Module Anti-Lock Brake System
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Jeep Commander | Limited, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Modulator Valve Part Number: 5179771AA
Product Specifications
- Other Name: Control - Anti-Lock Brake; ABS Hydraulic Assembly; ABS Control Module; ABS Control Unit; Hydraulic Unit; Modulator; Control Unit Anti-Lock Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2009 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Control Module Part Number: 68065988AA
Product Specifications
- Other Name: Control - Anti-Lock Brake; ABS Hydraulic Assembly; ABS Control Module; Modulator Valve; ABS Control Unit; Control Unit Anti-Lock Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Jeep Commander | Limited, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 5.7 L GAS

Jeep Commander ABS Control Module

Choose OEM ABS Control Module that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each ABS Control Module follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

ABS Control Module is indeed one of the prominent parts of the anti-lock braking system of Jeep Commander of different models well known for its efficiency and durability. This module occupies an important position to improve vehicle safety because it can prevent wheel lock-up during hard braking necessary to regain the control and avoid skidding. The ABS Control Module works in cooperation with wheels speed sensors, valve, pump and the electronic control unit, in order to offer the right pressure of brakes. In the years past, Jeep has incorporated an ABS Control Module accompanied by such features such as the electronic stability control as well as traction control; all that enhance handling in difficult terrain. These improvements apply to the Jeep Commander in both the XK and 2022 designs, and can be a very attractive and flexible People Carrying vehicle of the mid-size Jeep for families. Evaluating the ABS Control Module with different alternatives of the Jeep Commander engine and transmission guarantees that drivers get the desired braking intensity. For instance, while the ABS Control Module improves ground braking in most conditions it also improves the car's steering control in loose surfaces such as gravel or snow. Given that the Jeep Commander is a modern car equipped with safety and efficiency systems, the ABS Control Module can be considered as top of the line among similar products in the automotive market while continuing to strengthen the Jeep brand's heritage of building reliable and powerful automobiles.

Jeep Commander ABS Control Module Parts and Q&A

Control Module
68046388AA
Q: How to Install an ABS Control Module in the Hydraulic Control Unit for Antilock Brakes on Jeep Commander?
A:
Attach the 3 ABM mounting bolts to the Hydraulic Control Unit and tighten each of them to 12 Nm (9 ft. lbs.). After that, use the bracket to mount the HCU onto the vehicle and attach it with 2 nuts. Link the four lines from the chassis at the HCU first and then fit the secondary Brake Line to both the HCU and the master cylinder. Following that, place the primary brake line where it connects to the master cylinder and HCU. Connect the HCU electrical connector again and connect the negative Battery Cable. Eliminate the brake pedal prop rod and then you should bleed the base and ABS brake systems. After that, connect the scan tool and conduct the ABS Verification Test to initiate the ABM.
Modulator Valve
5179771AA
Q: How to Remove the ABS Control Module from the Hydraulic Control Assembly on Jeep Commander?
A:
Before you remove the Hydraulic Control Assembly for the Antilock Brakes, ensure you remove the negative battery cable from the battery. After that, set up a brake pedal prop and empty the master cylinder. Raise the car and remove the Brake Line from the master cylinder, then remove the same brake line from the HCU 4. After that, take out the secondary brake tube from the master cylinder and the HCU 4. After that, clip out the 4 blue connector lines at the HCU 4 and disconnect both sets of connectors for it. Disconnect the nuts from bracket 5 found on the HCU and then take both the HCU 3 and the bracket out from the vehicle. Remove the three bolts that hold the ABM 1 onto the HCU 2 near the end.