How to install an Engine Mount in 4X2 and 4X4 Configurations on Jeep Commander?

For a 4X2 engine mount, place the transmission mount bracket (2) back on the transmission after removing it, if you took it off during installation. After that, place the transmission mount (3) on the transmission mount bracket (2) and secure both with fasteners (1). Make sure the bolts are fastened to 30 Nm (22 ft.lbs.). The last step is to place the crossmember. For a 4X4 vehicle and the transmission mount (1), put it on the transmission and insert and tighten the bolts (2) to 30 Nm (22 ft.lbs.) prior to fitting the crossmember.

How to Service and Repair a Front Engine Mount on Jeep Commander?

Before working on the front engine mount, take care to disconnect the negative battery cable. After that, lift the automobile and unmount the engine using the bolts. Use a proper jack to lift the engine and then get rid of the bolts holding the engine mount in place (2). Removing the mount (1) from the engine should be your final step.

OEM Jeep Commander Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Engine Mounts found

View related parts
Jeep Commander Mount Bracket, Driver Side Part Number: 4854564AB
$69.80 MSRP: $107.00
You Save: $37.20 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mounting; Engine Mount Bracket, Right; Engine Mount, Right; Engine Mount, Left; Motor Mount; Mount; Bracket And Insulator Engine Mounting; Engine Mount Bracket
- Position: Driver Side
- Replaces: 4854564AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Jeep Commander | Limited, Overland, Sport | 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Motor Mount, Passenger Side Part Number: 52090296AF
$168.82 MSRP: $254.00
You Save: $85.18 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount, Right; Engine Mount Bracket; Mount Bracket; Mount; Bracket Engine Mount
- Position: Passenger Side
- Replaces: 52090296AD, 52090296AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Commander Mount Bracket, Driver Side Part Number: 52090305AG
$180.15 MSRP: $269.00
You Save: $88.85 (34%)
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mounting; Engine Mount Bracket, Left; Engine Mount, Left; Motor Mount; Mount; Bracket And Insulator Engine Mounting; Engine Mount Bracket
- Position: Driver Side
- Replaces: 52090305AE, 52090305AD, 52090305AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Jeep Commander
- 2006-2008 Jeep Commander | 5.7L V8
View related parts
Jeep Commander Motor Mount, Driver Side Part Number: 52090297AG
$180.15 MSRP: $269.00
You Save: $88.85 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount, Left; Engine Mount Bracket; Mount Bracket; Mount; Bracket Engine Mount
- Position: Driver Side
- Replaces: 52090297AF, 52090297AE, 52090297AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Commander Trans Crossmember Part Number: 52090070AI
$588.53 MSRP: $858.00
You Save: $269.47 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crossmember - Transmission; Transmission Crossmember; Crossmember Transmission
- Replaces: 52090070AH, 52090070AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Mount Bracket, Passenger Side Part Number: 52090304AG
$201.45 MSRP: $267.00
You Save: $65.55 (25%)
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mounting; Engine Mount Bracket, Right; Engine Mount, Right; Motor Mount; Mount; Bracket And Insulator Engine Mounting; Engine Mount Bracket
- Position: Passenger Side
- Replaces: 52090304AE, 52090304AF, 52090304AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Jeep Commander
- 2006-2008 Jeep Commander | 5.7L V8
View related parts
Jeep Commander Mount Bracket, Passenger Side Part Number: 4854565AB
$177.43 MSRP: $267.00
You Save: $89.57 (34%)
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mounting; Engine Mount Bracket, Left; Engine Mount, Right; Engine Mount, Left; Motor Mount; Mount; Bracket And Insulator Engine Mounting; Engine Mount Bracket
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Jeep Commander | Limited, Overland, Sport | 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Motor Mount, Driver Side Part Number: 52090301AF
$174.48 MSRP: $262.00
You Save: $87.52 (34%)
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mounting; Engine Mount Bracket, Left; Engine Mount, Left; Mount Bracket; Mount; Bracket And Insulator Engine Mounting; Engine Mount Bracket
- Position: Driver Side
- Replaces: 52090301AE, 52090301AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2009 Jeep Commander | 65th Anniversary Edition, Base, Limited, Sport | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Jeep Commander Motor Mount, Passenger Side Part Number: 52090300AF
Product Specifications
- Other Name: Bracket - Engine Mounting; Engine Mount Bracket, Right; Engine Mount, Right; Mount Bracket; Mount; Bracket And Insulator Engine Mounting; Engine Mount Bracket
- Position: Passenger Side
- Replaces: 52090300AD, 52090300AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2009 Jeep Commander | 65th Anniversary Edition, Base, Limited, Sport | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Jeep Commander Front Mount Part Number: 68417512AB
$206.21 MSRP: $304.00
You Save: $97.79 (33%)
Product Specifications
- Other Name: Gasket Kit - Engine; Valve Grind Gasket Kit; Overhaul Gasket Set
- Replaces: 68196239AC, 68196239AA, 68196239AB, 68417512AA, 68046260AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Jeep Commander | Limited, Overland, Sport | 5.7L V8, 8 Cyl 5.7 L GAS

Jeep Commander Engine Mount

Choose OEM Engine Mount that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Engine Mount follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Jeep Commander Engine Mount is a part popular for the consideration it obtains from consumers due to their high standards in their efficiency in functioning Jeep Commander Automobiles. To reduce noise and vibration of the engine operation the Engine Mount fixes the engine at a specified position for comfort while driving and safety of the car. This holds especially true for the Jeep Commander which has variant models such as the XK and the 2022 Meridian, all of which are set to enhance from the Engine Mount's sturdy production. In the classic application, the motor mount is made of metal-and-rubber assembly where the rubber part is responsible for absorbing vibration, and recent development includes hydraulic mounts and electronic active ones where the vibration ability is increased with respect to RPM. These features also enhance the performance and safety of the vehicle besides increasing the driving comfort by avoiding tasks that may harm the constituent components of the vehicle. It is necessary to pay attention to the state of the Jeep Commander Engine Mount since it wears out over time and may become spongy or separate. Thus by keeping the integrity of the Engine Mount system, jeep owners would enhance on the durability of their car. The Jeep Commander Engine Mount offered on the market is impressing not only with its unique concept but also with its universality of usage with different Jeep Commander car models which emphasizes Jeep's adherence to quality and reliability of every car's performance.

Jeep Commander Engine Mount Parts and Q&A

Mount Bracket, Driver Side
52090305AG
Q: How to install an Engine Mount in 4X2 and 4X4 Configurations on Jeep Commander?
A:
For a 4X2 engine mount, place the transmission mount bracket (2) back on the transmission after removing it, if you took it off during installation. After that, place the transmission mount (3) on the transmission mount bracket (2) and secure both with fasteners (1). Make sure the bolts are fastened to 30 Nm (22 ft.lbs.). The last step is to place the crossmember. For a 4X4 vehicle and the transmission mount (1), put it on the transmission and insert and tighten the bolts (2) to 30 Nm (22 ft.lbs.) prior to fitting the crossmember.
Motor Mount, Passenger Side
52090296AF
Q: How to Service and Repair a Front Engine Mount on Jeep Commander?
A:
Before working on the front engine mount, take care to disconnect the negative Battery Cable. After that, lift the automobile and unmount the engine using the bolts. Use a proper jack to lift the engine and then get rid of the bolts holding the engine mount in place (2). Removing the mount (1) from the engine should be your final step.