How to Install a Crankshaft Seal on Jeep Commander?

The crankshaft main bearing seal should first be installed after you lubricate the crankshaft flange with engine oil. Afterward, line up Special Tool 8349-2 for the magnetic seal onto the crankshaft's backside and put the crankshaft rear oil seal over the guide. Use the Special Tools 8349 Crankshaft Rear Oil Seal Installer and C-4171 Driver Handle to tap the seal into position around the crankshaft bore of the cylinder block. After that, place the flexplate and the transmission into position.

How to Remove a Crankshaft Seal on Jeep Commander?

If the repair is done inside the car, remove the transmission first and next, take the flexplate off. It is not possible to use a crankshaft oil seal (1) again after you remove it. Keep tightening the removal tool into the seal until it feels that it won't go in any more. If installation is not done right the initial time, the tool could come free without taking the seal out of the engine. In the end, remove the oil seal at the rear of the crankshaft using Seal Remover 8506 (2).

OEM Jeep Commander Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Crankshaft Seals found

View related parts
Jeep Commander Oil Seal, Front Part Number: 53021313AA
$10.10 MSRP: $14.85
You Save: $4.75 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Timing Cover Gasket; Timing Cover Seal; Crankshaft Seal; Front Crank Seal; Timing Cover Oil Seal; Engine Crankshaft Seal.
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Jeep Commander Oil Seal, Front Part Number: 53021585AD
$24.52 MSRP: $36.25
You Save: $11.73 (33%)
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Front Engine Crankshaft Seal; Timing Cover Seal; Gasket; Crankshaft Seal; Front Seal included with Long Block Engine Install Kit.
- Position: Front
- Replaces: 53021585AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | Limited, Overland, Sport | 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Rear Main Seal Part Number: 53020788AB
$32.91 MSRP: $48.75
You Save: $15.84 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Rear; Crankshaft Seal; Seal Crankshaft Bearing Oil; Seal Crankshaft Oil Rear; Engine Crankshaft Seal
- Position: Rear
- Replaces: 68045792AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Sport | 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Jeep Commander Rear Main Seal Part Number: 53021335AE
$94.83 MSRP: $142.00
You Save: $47.17 (34%)
ADD TO CART
Product Specifications
- Other Name: Retainer - Crankshaft Rear Oil Seal; Engine Crankshaft Seal, Rear; Rear Main Seal Retainer; Crankshaft Rear Oil Seal not included with Long Block Engine Install Kit.
- Position: Rear
- Replaces: 53021335AD, 53021338AB, 68017721AA, 53021335BA, 53021335AC, 68060342AA, 5140028AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | Limited, Overland, Sport | 5.7L V8, 8 Cyl 5.7 L GAS

Jeep Commander Crankshaft Seal

Choose OEM Crankshaft Seal that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Crankshaft Seal follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Jeep Commander Crankshaft Seal is a critical part that epitomizes Jeep vehicle's strength and competence. Sitting at the forward part of the engine, this Crankshaft Seal has been specifically tasked with avoiding oil leakage from the crankcase hence helping feed the crankshaft with adequate oil. Made of a combination of metal and rubber, the Jeep Crankshaft Seal for the Commander reduces the amount of abrasion that happens to the crankshaft and other engine components, which in turn increases the efficiency of the car. Compatibility is another aspect that is considered prominent; this Crankshaft Seal serves multiple Commander models like the XK and the 2022 Meridian and thus helps jeep owners to take proper care of their expensive jeep models. Crankshaft Seal is the component of the Jeep Commander which wears out with time and should one fail to replace after some mileage; it is wise and essential to check on the engine power. The model Jeep Commander boasts of a three-row interior layout and powerful engines; these are backed up by the unwavering Crankshaft Seal. Apart from enhancing the durability of the vehicle, this component also helps in enhancing the safety of the Jeep Commander by avoiding cases of oil leakage that otherwise could lead to harm to the car's engine. As seen in the Jeep Commander Crankshaft Seal, the brand's various successes, as well as customer requirements, prove its indispensability in the automotive market as a symbol of quality and efficiency.

Jeep Commander Crankshaft Seal Parts and Q&A

Oil Seal, Front
53021585AD
Q: How to Install a Crankshaft Seal on Jeep Commander?
A:
The crankshaft main bearing seal should first be installed after you lubricate the crankshaft flange with engine oil. Afterward, line up Special Tool 8349-2 for the magnetic seal onto the crankshaft's backside and put the crankshaft rear oil seal over the guide. Use the Special Tools 8349 Crankshaft Rear Oil Seal Installer and C-4171 Driver Handle to tap the seal into position around the crankshaft bore of the cylinder block. After that, place the flexplate and the transmission into position.
Oil Seal, Front
53021313AA
Q: How to Remove a Crankshaft Seal on Jeep Commander?
A:
If the repair is done inside the car, remove the transmission first and next, take the flexplate off. It is not possible to use a crankshaft oil seal (1) again after you remove it. Keep tightening the removal tool into the seal until it feels that it won't go in any more. If installation is not done right the initial time, the tool could come free without taking the seal out of the engine. In the end, remove the oil seal at the rear of the crankshaft using Seal Remover 8506 (2).