How to Remove a Rear Door Window Regulator on Jeep Commander?

First, remove the watershield before you take out the rear door window regulator. Then, fit the window switch for a little while and raise the glass up so you can reach the clamp screws, taping the glass down before replacing the switch. Move the screw on each window regulator glass clamp so that the glass releases, but don't take out the entire bolt. Take out bolts 1 and 4 which fix the window regulator rail to the inside of the door and disconnect electrical connector 3. Then, bring the regulator down and take it from under the door.

How to Install a Window Regulator for the Rear Door on Jeep Commander?

Load the window regulator into the rear door insert area through the main access hole up top and attach the wire harness connector 3 to the window regulator motor. Pull the regulator pieces into the regulator clamps. Using the first and second bolts, connect the regulator rails to the door and tighten them to 8.5 Nm (75 in. lbs.). After removing the tape, temporarily hook the window switch up to the door glass, so that the glass rises into the fully raised position. Make sure each of the window regulator glass clamps' bolts is tightened to 12 Nm (105 in. lbs.). After that, put the watershield and trim panel on the front door's inside and then install watershield 1 at the rear door.

OEM Jeep Commander Window Regulator

Electric Power Window Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Window Regulators found

View related parts
Jeep Commander Window Regulator, Front Driver Side Part Number: 55396481AI
$215.62 MSRP: $322.00
You Save: $106.38 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Front Door Window; Window Regulator, Front Left; Regulator Front Door Window
- Position: Front Driver Side
- Replaces: 55396481AG, 55396481AH, 55396481AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Jeep Commander | Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Window Regulator, Front Passenger Side Part Number: 55396480AI
$227.23 MSRP: $322.00
You Save: $94.77 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Front Door Window; Window Regulator, Front Right; Regulator Front Door Window
- Position: Front Passenger Side
- Replaces: 55396480AF, 55396480AG, 55396480AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Jeep Commander | Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Window Regulator, Front Driver Side Part Number: 55396481AE
$115.57 MSRP: $170.00
You Save: $54.43 (33%)
ADD TO CART
Product Specifications
- Other Name: Regulator - Front Door Window; Window Regulator, Front Left
- Position: Front Driver Side
- Replaces: 55396481AB, 55396481AD, 55396481AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Window Regulator, Rear Passenger Side Part Number: 55396482AF
Product Specifications
- Other Name: Regulator - Rear Door Window; Window Regulator, Rear Right
- Position: Rear Passenger Side
- Replaces: 55396482AB, 55396482AC, 55396482AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Window Regulator, Front Passenger Side Part Number: 55396480AE
Product Specifications
- Other Name: Regulator - Front Door Window; Window Regulator, Front Right
- Position: Front Passenger Side
- Replaces: 55396480AD, 55396480AB, 55396480AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Window Regulator, Rear Driver Side Part Number: 55396483AF
Product Specifications
- Other Name: Regulator - Rear Door Window; Window Regulator, Rear Left
- Position: Rear Driver Side
- Replaces: 55396483AB, 55396483AD, 55396483AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Jeep Commander Window Regulator

Choose OEM Window Regulator that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Window Regulator follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Window Regulator is amongst the crucial elements for proper functioning of windows in Jeep Commander which also helps in increasing the efficiency and safety of the Car. Iconized for its efficacy and quality, the Window Regulator is one among the most indispensable components that controls the lifting and lowering of windows and also the fixing of window glass. Jeep Commanders employ scissor as well as cable styles of Window Regulators, which are all manufactured to strict standards to fit different Jeep Commander models, including the XK and even the most recent 2022 Jeep Meridian edition. This compatibility enhances the Jeep Commander users to now change Window Regulators that are defective and resolve problems like windows getting stuck. Window Regulator is a product that will be used often, so it is important that you as a consumer to ensure that you attain one for your vehicle since you need the convenience and safety of the car. As a highlight, there is the function of an electric motor, which does not require great efforts to operate; however, manual cranks remain viable. Due to the three rows of seats setup and powerful construction, the Jeep Commander especially needs the efficiency of the Window Regulator. This component simply improves the essence of driving besides contributing to safety of the users by guaranteeing that the windows are capable of being closed tightly. The Window Regulator claims a high-durability and high-performance image in the automotive market, which is one of the reasons why it is an important component of Jeep Commander.

Jeep Commander Window Regulator Parts and Q&A

Window Regulator, Rear Passenger Side
55396482AF
Q: How to Remove a Rear Door Window Regulator on Jeep Commander?
A:
First, remove the watershield before you take out the rear door window regulator. Then, fit the window switch for a little while and raise the glass up so you can reach the clamp screws, taping the glass down before replacing the switch. Move the screw on each window regulator glass clamp so that the glass releases, but don't take out the entire bolt. Take out bolts 1 and 4 which fix the window regulator rail to the inside of the door and disconnect electrical connector 3. Then, bring the regulator down and take it from under the door.
Window Regulator, Rear Driver Side
55396483AF
Q: How to Install a Window Regulator for the Rear Door on Jeep Commander?
A:
Load the window regulator into the rear door insert area through the main access hole up top and attach the wire harness connector 3 to the window regulator motor. Pull the regulator pieces into the regulator clamps. Using the first and second bolts, connect the regulator rails to the door and tighten them to 8.5 Nm (75 in. lbs.). After removing the tape, temporarily hook the window switch up to the door glass, so that the glass rises into the fully raised position. Make sure each of the window regulator glass clamps' bolts is tightened to 12 Nm (105 in. lbs.). After that, put the watershield and trim panel on the front door's inside and then install watershield 1 at the rear door.